AS91L1001 - Jtag Test Controllerthe AS91L1001 Device Provides an Interface Between The 60x Bus on The Motorola MPC8260 Processor and Two Totally Independent IEEE1149.1 Ports. It Handles All The Protocol For The 60x Bus to Write and Read Directly to Registers Within The Device With no Additional Glue Logic
AS91L1002 - Jtag Test Sequencerthe AS91L1002 ProvidesA Solution to Perform Boundary Scan Tests and IEEE1149.1 Jtag Tests onA PCB Board at Reset Time Without Any Third Party Test Hardware orA Microprocessor.once Enabled, The AS91L1002 Executes Jtag and Boundary Scan Tests Stored inA Flash Memory. The Results of The Tests Are Compared With The Expected Results Also Stored in Flash Memory. Upon Completion of The Tests,A Pass/fail Result is Presented. The AS91L1002 Enables Very Rapid Testing of The Complete PCB at Res
AS91L1003U - 3-Port Jtag Gatewaythe AS91L1003U isA One to Three-port Jtag Gateway. It PartitionsA Simple Jtag Chain Into Three Separate Chains. These Separate Chains CAN be Optionally Configured to Operate asA Single Chain.the AS91L1003U Provides The Capability of Partitioning The PCB Into Multiple Smaller IEEE1149.1 Scan Chains Totally Under Software Control. Partitioning The IEEE1149.1 Chains on The PCB Has Several Benefits, Which Include Easier Fault Diagnostics Capabilities asA Fault on One of The IEEE1149.1 Loc