ChipFind - документация

Электронный компонент: 5B35-CUSTOM

Скачать:  PDF   ZIP
Isolated Linearized 4-Wire RTD Input
5B35
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703
2004 Analog Devices, Inc. All rights reserved.
FEATURES
Single-channel signal conditioning module that Amplifies,
Protects, Filters, and Isolates Analog Input.
Isolates and protects a wide variety of four-wire RTDs.
Generates an linearized, highly accurate output of 0 to +5V.
Module circuitry can withstand 240v rms at the input screw-
terminals.
All 5B35 series modules are mix-and-match and Hot
Swappable.

APPLICATIONS
Industrial signal conditioning
Industrial signal isolation
Industrial signal filtering
Signal Linearization

PRODUCT OVERVIEW
The 5B Series represents an innovative generation of low cost,
high performance plug-in signal conditioners. Designed for
industrial applications, these modules incorporate highly
reliable transformer-based isolation and automated surface-
mount manufacturing technology. They are compact,
economical components whose performance exceeds that
available from more expensive devices. Combining 1500 V rms
continuous isolation, +0.05% calibrated accuracy, small size and
low cost, the 5B Series is an attractive alternative to expensive
signal conditioners and in-house designs
All modules are potted and identical in pin-out and size (2.27" x
2.32" x 0.595"). They can be mixed and matched, permitting
users to address their exact needs, and may be "hot swapped
without disturbing field wiring or power. The isolated input
modules provide 0 to +5V or +5V outputs and accept J, K, T, E,
R, S, N, or B type thermocouples.
These modules feature complete signal conditioning functions
including 240 V rms input protection, filtering, chopper
stabilized low drift +1 uV/oC amplification, 1500 V rms
isolation, and sensor excitation when required.
All modules feature excellent common mode rejection and
meet industrial transient surge withstand specifications.
FUNCTIONAL BLOCK DIAGRAM
Figure 1. 5B35 Functional Block Diagram
There are also a number of backplanes and mounting sockets
which provide a complete signal conditioning solution for end
users. Each backplane incorporates screw terminals for field
wiring inputs and outputs and cold junction sensors for
thermocouple applications.
These signal conditioners are designed to provide an easy and
convenient solution to signal conditioning problems of both
designers and end users in measurement and control
applications. Typical uses include microcomputer-based
measurement systems, standard data acquisition systems,
programmable controllers, analog recorders and dedicated
control systems. The 5 B series modules are ideally suited to
applications where monitoring and control of temperature,
pressure, flow, rotation and other analog signals are required.
The 5B Series modules and backplanes are approved by Factory
Mutual (FM) and the 5B Series modules are approved by the
Canadian Standards Association (CSA) for use in Class 1,
Division 2, Groups A, B, C, and D locations. These approvals
certify that the 5B Series is suitable for use in locations where a
hazardous concentration of flammable gas may exist only under
fault conditions of operation. Equipment of this category is
called "nonincendive" and they need no special enclosures or
other physical safeguards. The 5B series modules and
backplanes have been tested and passed the stringent heavy
industrial requirements of the EU's electromagnetic
compatibility (ENC) directive EN50082-1 and EN50081-2.
When used according to installation directions (refer to 5B
series User Manual), any errors caused by EMI/RFI interference
will be less than 0.1% of the full scale 5B measurement range for
field strengths up to 10 V/M and frequencies up to 1 GHz.
5B35
Rev. 0 | Page 2 of 9
GENERAL DESCRIPTION
The 5B35 is a single-channel signal conditioning module that
amplifies, filters, isolates and protects a wide variety of four-wire
RTDs. The module provides a linearized, highly accurate output
of 0 to +5V.
Accurate and Stable Performance
The four-wire
configuration of the 5B35 supplies RTD excitation from a
precision, protected current source: two RTD wires carry the
excitation current and two wires serve as signal-input leads that
measure the voltage across the RTD. Because no excitation
current flows through the signal input leads, the length or
resistance of the leads creates little or no RTD measurement
error. A low-drift chopper-stabilized differential amplifier
allows use of very low excitation current to minimize error due
to RTD self heating. The amplifies low input offset drift of
+0.01
o
C/
o
C and gain drift of +30ppm/
o
C. Assure accuracy over
the full operating temperature range.
True Three-Port Isolation
The floating, differential input
circuit on the field side eliminates the need for any input
grounding. Signal and power isolation by transformer coupling
uses a proprietary modulation technique for linear, stable and
reliable performance. A demodulator on the computer side of
the signal transformer recovers the original signal, which is then
filtered and buffered to provide a low-noise, low-impedance
output signal. True three-port isolation (Input-Output-Power)
includes common-mode rating of: 1500V rms between input
and output and input and power; 250V rms between power and
output no return path is required between the power and
signal output commons.
Filtering and Protection
An optimized five-pole Butterworth
filter (with a 4-Hz bandwidth) provides 116dB of normal-mode
rejection (noise on signal) at 60 Hz and 108 dB at 50 Hz. Output
noise is an exceptionally low 0.3 Mv p-p in a 100 kHz
bandwidth and 6 mV p-p in a 5 MHz bandwidth.
The 5B35 protects the computer side from damage due to field-
side over-voltage faults. The module withstands 240V rms at
the input terminals without damage, thereby shielding the
internal computer-side circuitry from field-side over-voltage
conditions. In addition, the 5B35 is mix-and-match and hot
swappable with all other 5B Series modules, so can be inserted
or removed from any socket in the same backplane without
disrupting system power.
A series output switch eliminates the need for external
multiplexing in many applications. The switch is turned on by
an active-low enable input. If the switch is to be on at all times,
the enable-input should be grounded to power common as it is
on the 5B01 and 5B08 backplanes.
.
.
Figure 2
5B35
Rev. 0 | Page 3 of 9
5B35 Models Available
Model
Input Range
Output Range
Accuracy
5B35-01
100
Platinum, =0.00385*
-100C to +100C (-148F to +212F)
0 V to +5 V
0.26C
5B35-02
0C to +100C (+32F to +212F)
0 V to +5 V
0.13C
5B35-03
0C to +200C (+32F to +392F)
0 V to +5 V
0.26C
5B35-04
0C to +600C (+32F to +1112F)
0 V to +5 V
0.78C
5B35-05
-100C to +200C (-148F to +392F)
0 V to +5 V
0.60C
5B35-C-01
10
Copper, =0.004274
0C to +120C (10
@ 0C) (+32F to
+248F)
0 V to +5 V
0.23C
5B35-C-02
0C to +120C (10
@ 25C)(+32F to
+248F)
0 V to +5 V
0.23C
5B35-N-01
120
Nickel, =0.00672
0C to +300C (+32F to +572F)
0 V to +5 V
0.40C
5B35-Custom
* *
5B35-C-Custom
* *
5B35-N-Custom
* *
* Custom Input/Output ranges are available including versions for the 100
Platinum RTD with
=0.003916. Refer to
configuration guide.
5B35 Specifications
(typical @ +25C and V
s
= +5 V dc)
Description Model
5B35
Input Ranges
Standard Ranges
Refer to Model Table
Custom Ranges
-200C to +850C (100
Platinum, = 0.00385)
-80C to +320C (120
Nickel, = 0.00672)
-100C to +260C (10
Copper, = 0.004274)
Output Range (R
L
> 50 k
)
0 V to +5 V
Accuracy
1
Initial @ +25C
Refer to Model Table
Conformity Error
0.05% Span
Input Offset vs. Temperature
0.01C/C
Output Offset vs. Temperature
20 V/C
Gain vs. Temperature
0.003% of Reading/C
Input Resistance
Power On
> 1000 M
Power Off
200 k
Overload
200 k
Noise
Input, 0.1 Hz to 10 Hz Bandwidth
0.2 V rms
5B35
Rev. 0 | Page 4 of 9
Output, 100 kHz Bandwidth
100 V rms (0.3 mV peak-peak)
Output, 1 MHz Bandwidth
1.5 mV peak-peak
Output, 5 MHz Bandwidth
6 mV peak-peak
Bandwidth, -3 dB
4 Hz
Output Rise Time, 10% to 90% Span
100 ms
Common-Mode Voltage (CMV)
Input-to-Output, Continuous
1500 V rms, maximum
Input-to-Power, Continuous
1500 V rms, maximum
Output-to-Power, Continuous
2
250 V rms, maximum
Transient ANSI/IEEE
C37.90.1-1989
Common Mode Rejection (CMR)
1 k
Source Imbalance, 50/60 Hz
190 dB (180 dB, Model 5B35-04)
Normal Mode Rejection (NMR)
116 dB @ 60 Hz; 108 dB @ 50 Hz
Sensor Excitation Current
100
Pt, 120 Ni
0.25 mA
10
Cu
1.0 mA
Lead Resistance Effect
100
Pt, 120 Ni
0.00001C/
10
Cu
0.0001C/
Input Protection
Continuous
240 V rms, maximum
Transient ANSI/IEEE
C37.90.1-1989
Output Resistance
25
Voltage Output Protection
Continuous Short to Ground
Output Current Limit
9 mA
Output Selection Time
6 s to 1 mV of V
out
@ C
load
= 0 to 2,000 pF
Output Enable Control
2
Max Logic "0"
+0.8 V
Min Logic "1"
+2.4 V
Max Logic "1"
+100 V
Input Current "0", "1"
0.5 A
Power Supply Voltage
+5 V dc 5%
Power Supply Current
15 mA
Power Supply Sensitivity, RTI
0.2C/% of V
s
Mechanical Dimensions
2.275" x 2.375" x 0.595"
(57.8 mm x 59.1 mm x 15.1 mm)
Environmental
Temperature Range
Rated Performance
-40C to +85C
5B35
Rev. 0 | Page 5 of 9
Operating
-40C to +85C
Storage
-40C to +85C
Relative Humidity
0 to 93% @ +40C non-condensing
RFI Susceptibility
0.5% Span error @ 400 MHz, 5 Watt, 3 ft

1
Includes the combined effects of repeatability, hysteresis, and conformity error. Loads heavier than 50 k
will degrade conformity and gain temperature coefficient.
2
The user's board layout must separate Power Common from Output Common. When the output switch is not used, connect the Enable Input to the Output Common. Output
Common is connected to power common when the 5B35 is installed on a 5B Series backplane.
Specifications subject to change without notice.