74
TO ORDER CALL 1-888-9-AIMTEC
AM10E-C Series
10 watt dc-dc converters
POWER MODULES FOR PCB MOUNTING
2:1 WIDE INPUT RANGE
REGULATED OUTPUT
LOW RIPPLE & NOISE
REMOTE ON/OFF CONTROL ( OPTIONAL)
GENERAL DESCRIPTION
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.
Our AM10E-C series is a family of cost effective 10W sin-
gle output DC-DC converters. These converters are shield-
ed on all six sides and encapsulated with a nickel-coated
copper with a non-conductive base and dimensions of
50.8x25.4x10.5mm. The high performance features of our
AM10E-C components include short circuit protection
with current limit auto recovery, tight line regulation and
a high efficiency operation coefficient up to 83%.
Fifteen models operate from an input voltage range of 12,
24 & 48VDC producing output voltages of 3,3, 5, 12, 15
& 24VDC. The normal operation is specified over the
full operating temperature range of -25C to +71C with
no derating required. Cooling is done by free air convec-
tion.
MTBF: > 800,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25C)
Specifications are subject to change without notification
Isolation Specifications:
Rated voltage
1500VDC
Resistance
>1000 Mohms
Capacitance
1000pF
Output Specifications:
Voltage accuracy
2%, max.
Ripple
<0.2% Vout +20mVmax (Vp-p)
Noise
<0.5% Vout +50mVmax (Vp-p)
Short circuit protection Current limit, auto-recovery
Over current protection Works over 120% of rating
and recovers automatically
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) 0.5%, typ.
Load regulation (10-100%)1%, typ.
Temperature coefficient 0.02%/C, typ.
Input Specifications:
Voltage range
12VDC, 9~18VDC
24VDC, 18~36VDC
48 VDC, 36~75VDC
Filter
p
(Pi) Network
Environmental Specifications:
Operating temperature
-25C ...+71C
Storage temperature
-55C ...+105C
Case temperature
+95C, max.
Humidity (non-condensing)
Up to 95%
Cooling
Free-air convection
Physical Specifications:
Dimensions
50.8x25.4x10.5mm,
2.0x1.0x0.413inches
Weight
32g
Case material
Nickel-Coated Copper with
Non-Conductive base,
six sides' shielded
General Specifications:
Efficiency
78% to 83%
Switching frequency
300KHz, typ. 100% load
DC-DC CONVERTERS
Continued on next page
PDF 
ZIP