General Specifications:
Efficiency
78% to 82%
Switching frequency
300KHz, typ. 100% load
70
TO ORDER CALL 1-888-9-AIMTEC
AM8T-C Series
8 watt dc-dc converters
24PIN DIP PACKAGE
PLASTIC ENCAPSULATED CASE
POWER MODULES FOR PCB MOUNTING
2:1 WIDE INPUT RANGE
REGULATED OUTPUT
LOW RIPPLE & NOISE
OPERATING TEMPERATURE : -25...+71C
GENERAL DESCRIPTION
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.
Our AM8T-C series is a family of cost effective 8W sin-
gle and dual output DC-DC converters. These converters
are shielded on all six sides and aluminum encapsulated,
have a non-conductive base and retain an anodized black
DIP24 compatible plastic case and dimensions of
31.8x20.3x10.2mm. The high performance features of our
AM8T-C components include short circuit protection with
current limit auto recovery, tight line regulation and a high
efficiency operation coefficient up to 82%. Twenty four
models operate from an input voltage range of 12, 24 &
48VDC producing output voltages of 3,3, 5, 12, 15, 24,
5, 12 & 15VDC. The normal operation is specified
over the full operating temperature range of
-25C to +71C with no derating required. Cooling is
done by free air convection.
MTBF: > 800,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25C)
Specifications are subject to change without notification
Isolation Specifications:
Rated voltage
1500VDC
Resistance
>1000 Mohms
Capacitance
1000pF, typ.
Output Specifications:
Voltage accuracy
2%, max.
Ripple
<0.2% Vout +20mVmax (Vp-p)
Noise
<0.5% Vout +50mVmax (Vp-p)
Short circuit protection
Current limit, auto-recovery
Over current protection
Works over 120% of rating
and recovers automatically
Line regulation (HL-LL) 0.5%, typ.
Load regulation (10-100%) 2%, typ.
Temperature coefficient 0.02%/C, typ.
Input Specifications:
Voltage range
12VDC, 9~18VDC
24VDC, 18~36VDC
48 VDC, 36~75VDC
Filter
p
(Pi) Network
Environmental Specifications:
Operating temperature
-25C ...+71C
Storage temperature
-55C ...+105C
Case temperature
+95C, max.
Humidity (non-condensing)
Up to 95%
Cooling
Free-air convection
Physical Specifications:
Dimensions
31.8x20.3x10.2mm,
tolerance 0.5mm
1.25x0.8x0.4inches
Weight
13g
Case material
Six-side shielded Aluminum
with Non-Conductive base,
Black Anodize
DC-DC CONVERTERS
Continued on next page