PD075-HL3
Low Cost Analog Photodiode
PD075-HL3-5xx
SC Receptacle
PD075-HL3-5xx
ST Receptacle
FEATURES
High Linearity
High Responsivity
Low Dark Current
Dielectric Passivation
100% Purge Burn-in
Planar Structure
APPLICATIONS
Low Cost Optical Receivers to 1GHz
Return Path CATV Optical Receivers
PD075-HL3-3xx
SC/APC Pigtail
PD075-HL3-5xx
FC Receptacle
PRODUCT DESCRIPTION
The PD075-HL3 is an InGaAs photodiode with
a photosensitive region 75
m in diameter. It
has been designed for use in low cost, low
noise, linear analog optical receivers.
Planar semiconductor design and dielectric
passivation provide low noise performance.
Reliability is assured by hermetic sealing and
100% purge burn-in (200C, 15 hours, Vr = 20V).
The device can be either pigtailed with SC, FC or
ST connectors (UPC or APC) or mounted in an
SC, ST of FC receptacle. Custom packages are
also available.
ELECTRICAL CHARACTERISTICS
Table 1: Electrical Specifications
PARAMETER
MIN
TYP
MAX
UNIT
Dark Current (I
D
) -
0.1
1.0
nA
Capacitance
(1)
- 0.8 0.9 pF
Responsivity at 1310nm 0.80
0.90
-
A/W
Responsivity at 1550nm 0.85
0.95
-
A/W
3dB bandwidth (75 bias)
2400
2700
-
MHz
Single Second Order (SSO)
(2)
- -70 -65
dBc
Single Triple Beat (STB)
(2)
- -80 -70
dBc
Optical Return Loss (Pigtail using SMF-28)
50
55
-
dB
Optical Return Loss (Receptacle, APC connector)
40
45
-
dB
Operating voltage
-
5
20
V
1) 5V bias voltage
(2) SSO and STB measurements to 500MHz using 2 and 3 tones at 40% OMI, 0dBm optical input, 1310nm, 12V bias.
PD075-HL3
Rev 1.0
2
Table 2: Absolute Maximum Ratings
PARAMETER
MIN
MAX
UNIT
Forward Current
-
5
mA
Reverse Current
-
250
A
Reverse Voltage
-
30
V
Optical input power
-
5
mW
Operating Case Temperature -40
+85
C
Storage Temperature
-40
+85
C
Soldering temperature (10 seconds)
-
+250
C
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied
under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.
PIN LOCATIONS Standard
Dimensions:
INCHES [mm]
ORDERING INFORMATION
Table 3: Standard
Part Number
Options
PD075-HL3-300
SC/APC pigtail, 1 meter SMF-28 fiber, 3 pin
PD075-HL3-520
SC/APC receptacle, 3 pin
Table 4: Custom
Part Number
Options
PD075-HL3-3xx
Number of pins: 2, 3
Fiber length: 0.5 meter, 1.0 meter
Fiber type: Single mode (SMF-28) or custom supplied
Connector Type: SC, ST or FC. APC or UPC
PD075-HL3-5xx
Number of pins: 2, 3
Connector Type: SC, ST or FC. Aligned for APC or UPC
Please contact Anadigics for the specific part number and pinout that suits your needs
ANADIGICS, Inc.
829 Flynn Road
Camarillo, California 93012, U.S.A.
Tel: +1 (805) 445-4500
Fax: +1 (805) 445-4502
URL:
http://www.anadigics.com
E-mail: Mktg@anadigics.com
I
MPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any
time without notice. The product specifications contained in Advanced Product Information sheets and
Preliminary Data sheets are subject to change prior to a product's formal introduction. Information in
Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS
assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the
information they are using is current before placing orders.
WARNING
ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of
an ANADIGICS product in any such application without written consent is prohibited.
PDF 
ZIP