DC/DC CONVERTERS C Class Non-isolated
1
2 YEAR WARRANTY
SIL06C Series
5 V i n a n d 1 2 V i n s i n g l e o u t p u t
6A current rating
Input voltage range: 4.5V - 5.5V or 10.2V - 13.8V
Output voltage range: 0.9V - 5.0V
Industry leading value
Cost optimised design
Excellent transient response
Output Voltage adjustability
Pathway for future upgrades
Supports silicon voltage migration
Resulting in reduced design-in and qualification time
Designed in reliability: MTBF of >7 million hrs
per Telcordia SR-332
The SIL06C series is a new high density open frame non-isolated converter for space
sensitive applications. Each model has a wide input range (4.5 - 5.5VDC or 10.2 -
13.8VDC) and offer a wide 0.9 - 5V output voltage range with a 6A load. An external
resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the 5V
maximum. Typical efficiencies for the models are 89% for the 5V input version and 91%
for the 12V input version. The SIL06C series offers remote ON/OFF and over-current
protection as standard. With full international safety approval including EN60950 and
UL/cUL60950, the SIL06C reduces compliance costs and time to market.
NEW Product
All specifications are typical at nominal input, full load at 25C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
5V input models
0.9V to 3.3V
(See Note 7)
12V input models
0.9V to 5.0V
Output setpoint accuracy With 1.0% trim resistors
2.5%
Line regulation
Low line to high line
0.2% max.
Load regulation
Full load to min. load
0.5% max.
Min./max. load
0A/6A
Overshoot
5V input models
3.0% max.
(at turn on)
12V input models
1.0% max.
Undershoot
100mV max.
Ripple and noise
5Hz to 20MHz (See Note 2)
See table
Transient response
Deviation
75mV
(See Note 1)
150s recovery to
within regulation band
INPUT SPECIFICATIONS
Input voltage range
5V input model
4.5 to 5.5VDC
12V input model
10.2 to 13.8VDC
Input current
No load
50mA
Remote OFF
5mA
Input current (max.)
5V input model
5.1A @ Io max.
(See Note 9)
12V input model
1.6A @ Io max.
Input reflected ripple
5V input model
52mA (pk-pk)
(See Note 2)
12V input model
56mA (pk-pk)
Remote ON/OFF
Logic compatibility
Active high
ON
>2.4VDC
OFF
<0.8VDC
Start-up time
Power up
<20ms
(See Note 3)
Remote ON/OFF
<20ms
File Name: SIL06C.PDF Rev: 04 Mar 2003
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E139421
UL60950 file No. E139421
TV
TV Product Service (EN60950) Certificate No. B0211 19870 205
CB report and certificate to IEC60950
INPUT SPECIFICATIONS (CONTD.)
Turn ON threshold
5Vin
4.5VDC
12Vin
9.0VDC
Turn OFF threshold
5Vin
4.3VDC
12Vin
7.5VDC
GENERAL SPECIFICATIONS
Efficiency
See Table
Switching frequency
Fixed
200kHz
Approvals and
(See Note 4)
TV Product Services
standards (pending)
IEC60950, UL/cUL60950
Material flammability
UL94V-0
Weight
9.3 (0.3oz)
MTBF
Telcordia SR-332
7,562,142 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient,
0C to +80C
(See Note 8)
temperature
Non-operating
-40C to +125C
PROTECTION
Short-circuit protection
Hiccup, non-latching
RECOMMENDED SYSTEM CAPACITANCE
Input capacitance
(See Note 11)
270F/20m esr max.
Output capacitance
(See Note 11)
680F/10m esr max.
Notes
1
di/dt = 10A/s, Vin = Nom, Tc = 25C, load change = 0.5 lo max. to 0.75
lo max. and 0.75 lo max. to 0.5 lo max.
2
Measured with external filter. See Application Note 131 for details.
3
Power up is the time from application of DC input to Power Good
enabled. Remote ON/OFF is from ON/OFF asserted high to Power Good
enabled
4
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
5
The standard unit with the suffix '-V' is for vertical mounting. To order a
unit with horizontal mounting, please add the suffix '-H' to the model
number, e.g. SIL06C-05SADJ-H.
6
Measured as per recommended set-up. Cin = 270F (20m esr max.).
Cout = 680F (10m esr max.).
7
Uses external resistor from trim to output ground. Minimum value 485
for 5V model, 280 for 12V model. See Applications Note 131 for
details.
8
Signal line assumed <3m.
9
External input fusing recommended.
10
See Application Note 131 for operation above 50C.
11
See Application Note 131 for more details.
12
These models have a wide trim output. 5Vin has an output of 0.9V to
3.3V and 12 Vin has an output of 0.9V to 5V. An external resistor adjusts
the output voltage.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
CAUTION: High internal temperatures. Ensure that unit is not user
accessible.
SIL06C Series
5 V i n a n d 1 2 V i n s i n g l e o u t p u t
DC/DC CONVERTERS C Class Non-isolated
2
NEW Product
OUTPUT
INPUT
OVP
OUTPUT
OUTPUT
OUTPUT
EFFICIENCY
REGULATION
MODEL
POWER
VOLTAGE
VOLTAGE
(12)
CURRENT
CURRENT
(TYP.)
LINE
LOAD
NUMBER
(5)
(MAX.)
(MIN.)
(MAX.)
20W
4.5-5.5VDC
N/A
0.9V - 3.3V
0A
6A
89%
0.2%
0.5%
SIL06C-05SADJ-V
30W
10.2-13.8VDC
N/A
0.9V - 5.0V
0A
6A
91%
0.2%
0.5%
SIL06C-12SADJ-V
Ripple and Noise Specification
Output
Model
Voltage
Pk - Pk
RMS
5V input models
0.9 to 2.5V
30mV
15mV
3.3V
40mV
15mV
12V input models
0.9 to 2.5V
40mV
20mV
3.3 to 5V
50mV
20mV
File Name: SIL06C.PDF Rev: 04 Mar 2003
S I L 0 6 C - 1 2 S A D J - V
Part Number System with Options
Rated Output Current
06 = 6Amps
Number of Outputs
SADJ = Single Adjustable Output
Product Family
SIL = Single in Line
Performance
C = Cost Optimised
Input Voltage
05 = 4.5V - 5.5V
12 = 10.2V - 13.8V
The ultra-wide output voltage trim range offers major advantages to users who
select the SIL06C series. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.9V to 5.0V. When the SIL06C series converter leaves
the factory the output has been adjusted to the default voltage of 0.9V
Output Voltage Adjustment of the SIL06C Series
Mounting Option
V = Vertical Mount
H = Horizontal Mount
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
SIL06C Series
5 V i n a n d 1 2 V i n s i n g l e o u t p u t
DC/DC CONVERTERS C Class Non-isolated
3
NEW Product
All dimensions in INCHES (mm)
General tolerance
0.01in (
0.25mm)
except where specified otherwise
1.200
(30.48)
0.610
(15.49)
0.527
(13.38)
0.025
(0.64) Typ.
Mechanical
Support Pin
0.062
(1.57)
PCB Ref.
PIN 8
0.025
(0.64) Typ.
PIN 1
0.315
(8.00 max.)
0.150
(3.81) Ref.
0.120
(3.05)
9 Places
Figure 1: Mechanical Drawing - Horizontal Mount Version
Figure 2: Mechanical Drawing - Vertical Mount Version
All dimensions in inches (mm)
General tolerance
0.01in (
0.25mm)
except where specified otherwise
0.070
(1.78)
0.315
(8.00) max.
Pin 1
Pin 8
0.025
(0.64)
0.610
(15.49)
1.200
(30.48)
0.040
(1.02) Ref.
0.150
(3.81)
8 Places
0.062
(1.57) Ref.
0.050
(1.27)
0.025
(0.64) Typ.
Data Sheet Artesyn Technologies 2003
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items:
Application Note
Longform Data Sheet
www.artesyn.com
File Name: SIL06C.PDF Rev: 04 Mar 2003
PIN CONNECTIONS
PIN NUMBER
FUNCTION
1
Vout
2
Trim
3
Ground
4
Power Good
5
Remote ON/OFF
6
Vin
7
Mechanical support
8
Mechanical support
9
Mechanical support on
horizontal version only
PDF 
ZIP