EXTERNAL AC/DC POWER SUPPLIES 40 W External AC/DC Power Supplies
1
2 YEAR WARRANTY
SSL40 Series
S i n g l e o u t p u t
4.21 x 1.77 x 0.98 inch enclosure
40 W external power supply
Molded UL94V-0 plastic enclosure
Stand alone `listed' equipment
Overvoltage and short circuit protection
EN55022, EN55011, FCC conducted and
radiated emissions level B
UL, CSA and VDE safety approvals
Available RoHS compliant
The SSL40 series is a 40 W universal input ac-dc external power supply in a 4.21 x 1.77 x
0.98 inch plastic enclosure. The SSL40 is a low cost series with six single output models in a
very small package providing a pre-approved external power solution for a host of
worldwide low power portable and desktop applications. The SSL40 provides 40 W of output
power with free air convection cooling. Standard features include universal input,
overvoltage, short circuit protection and EN55022 conducted emissions level B. The series,
with full international safety approval and the CE mark, provides pre-approved SELV outputs
without the need for further safety approval or mechanical integration into the application
system. The SSL40 series is designed for use in low power, portable and desktop data
networking, computer and industrial applications requiring low cost external power adapters
in a small package.
All specifications are typical at nominal input, full load at 25 C unless otherwise stated
GENERAL SPECIFICATIONS
Hold-up time
110 Vac @ 40 W
5 ms
230 Vac @ 40 W
45 ms
Efficiency
110 Vac @ 40 W
83% typical
Isolation voltage
Input/output
3000 Vac
Switching frequency
Fixed
100 kHz 10 kHz
Approvals and
Safety
VDE0805, EN60950
standards IEC950,
UL1950
CSA C22.2 No. 950
Case material
General Electric Lexan, black
Flammability rated
UL94V-0
Weight
200 g (7.06 oz)
MTBF
MIL-HDBK-217F
150,000 hours min.
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating temperature
0 C to +40 C
full load, no derating
Non-operating
40 C to +85 C
0 C to +40 C ambient,
Full load
convection cooled
Peak
(See Note 1)
Relative humidity
Non-condensing
5% to 95% RH
Altitude
Operating
10,000 feet max.
Non-operating
30,000 feet max.
Vibration (See Note 6)
5-500 Hz
2.4 G rms
Shock
per MIL-STD-810E
516.4 Part IV
OUTPUT SPECIFICATIONS
Line regulation
Single output
0.5%
Total regulation
(See Note 3)
2.0%
Overshoot/undershoot
At turn on
1.0%
Transient response
Main output
5.0% max. dev.,
50% to 100%
1ms recovery
load step
to 1.0%
Temperature coefficient
0.02%/C, max.
Overvoltage protection
See table
Output power limit
135% to 175% of
max. output power
Short circuit protection
Continuous
with auto-restart
INPUT SPECIFICATIONS
Input voltage range
Universal input
90-264 Vac
Input frequency range
47-440 Hz
Input current
90 Vac
1.00 Arms max.
220 Vac
0.52 Arms max.
EMC CHARACTERISTICS
Radiated emissions
EN55022/11, FCC part 15
Level B
Conducted emissions
EN55022/11, FCC part 15
Level B
SPECIFICATIONS
International Safety Standard Approvals
VDE0805/EN60950/IEC950 License No. 104723G
UL1950 File No. E136005
CSA C22.2 No. 950 File No. LR41062
geprfte
Sicherhelt
File Name: ssl40.pdf Rev (02): 07 Nov 2005
Datasheet Artesyn Technologies 2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
Notes
1
Peak output current lasting less than 60 seconds with duty cycle less than
5.0%. During peak loading, output voltage may exceed total regulation
limits.
2
20 MHz bandwidth, peak to peak, measured using a 12 inch twisted pair
terminated with a 47 F electrolytic capacitor.
3
Total regulation is defined as the static output regulation at 25 C, including
initial tolerance, line voltage within stated limits, load currents within stated
limits, and output voltages adjusted to their factory settings.
4
To help maintain the power supply safety approvals, the IEC320/C7 input
connector cable must be rated minimum 3.0 A and approved by an
applicable safety agency for the intended country of use. National and
international variations on mains plugs, adapters and customer preference
to lead length prevents Artesyn from supplying an IEC320/C7 (or
compatible) input connector cable. The IEC320/C7 input (or compatible)
connector cable can be sourced locally, e.g. Newark, Qual Electronics,
Radio Shack, etc. or other non affiliated distributors.
SSL40 Series
S i n g l e o u t p u t
EXTERNAL AC/DC POWER SUPPLIES 40 W External AC/DC Power Supplies
2
www.artesyn.com
OUTPUT
OUTPUT CURRENTS
RIPPLE
(2)
OVP
TOTAL
MODEL
VOLTAGE
MIN
MAX
PEAK
(1)
THRESHOLD
(5)
REGULATION
(3)
NUMBER
(8,9)
+12 V
0 A
3.0 A
3.5 A
250 mV
15.0-18.0 V
2.0%
SSL40-7612J
+14 V
0 A
2.7 A
3.2 A
250 mV
16.5-19.5 V
2.0%
SSL40-7614J
+15 V
0 A
2.6 A
3.0 A
250 mV
17.5-21.0 V
2.0%
SSL40-7615J
+18 V
0 A
2.2 A
2.6 A
250 mV
22.0-25.5 V
2.0%
SSL40-7618J
+24 V
0 A
1.6 A
1.9 A
250 mV
29.0-34.2 V
2.0%
SSL40-7624J
+48 V
0 A
0.83 A
1.0 A
250 mV
55.0-64.0 V
2.0%
SSL40-7617J
1.77
(45.00)
0.83
(21.00)
0.47
(12.00)
0.55
(14.00)
2.09
(53.00)
4.21
(107.00)
36.00
0.79
(914.00
20)
20)
0.98
(25.00)
ALL DIMENSIONS IN INCHES (mm)
0.098
(2.500)
PHONE JACK
PIN CONNECTIONS 2.5 MM JACK PLUG
Inner
V
A
SWITCHCRAFT Power
Outer
Return
Jack, P/N 712A or equiv.
File Name: ssl40.pdf Rev (02): 07 Nov 2005
Notes
5
Output voltage protected by Zener diode.
6
Three orthogonal axes random vibration, 10 minute test for each axis.
7
IEC320/C8 type input connector.
8
The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
9
NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
PDF 
ZIP