rev 03.25.05
Technical Support: (888) 41ASTEC or (407) 241-2752
Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211
Asia (HK) 852-2437-9662
190
Special Features
120-960 Watts
ADN Series
3-Phase
Electrical Specs
Complies with EN61000-3-2
DC OK Signal (indicator)
Adjustable Voltage
Industrial grade design
(no derating to 60C)
User-friendly front panel
Single phase input available
Highly efficient >90% switching technology
High MTBF and reliability
Peak current capability 2x rated
current for 2 seconds
Three year warranty
Input
Nominal voltage
380-480 VAC
Power factor (PFC)
EN61000-3-2
AC Input range
340-576 VAC
DC Input range
450-820 VDC
Frequency
47 - 63 Hz, 500 Hz
Phase
1 or 3 on 5, 10 & 20A* models.
30A & 40A models are 3 only.
Output
Nominal voltage
24V (22.5 - 28.5 VDC Adj.)
Holdup time
>20ms at full load (25C)
Tolerance
<2% overall
(combination line/load/time/temp)
Line regulation
<0.5%
Load regulation
<0.5%
Time & temp. drift
<1%
Initial voltage setting
24.5V 1%
Ripple
<50mVpp
Parallel Operation
Current limit (fold forward)
constant power
10A, 20A, 30A
User selectable
40A
Active single wire parallel
Over voltage protection >30.5 <33 VDC
*On 20A unit, derate to 75% when operating 1.
Storage/shipment
-25C to +85C
Operating
-10C to 60C
(convection)
(derate to 50% at +70C)
Humidity
<90% RH noncondensing
per IEC 68-2-2, 68-2-3
IP20 (EN60529), protection
from moisture & conden-
sation
Note: Derate output to 50% when unit is
mounted sideways or front side up.
EMC
Emissions
EN500081-1, -2 Class B EN55011, EN55022
Radiated and Conducted including Annex A.
Immunity
EN50082-1, -2; EN61000-4-2, Level 4,
EN61000-4-3 Level 3, EN61000-4-6 Level 3;
EN61000-4-4 Level 4 input and Level 3 output;
EN61000-4-5 Isolation Class 4, EN61000-4-11;
Transient resistance according to VDE
0160/W2 over entire load range.
Approvals
CB Scheme, EN60950; EN50178; EN60204;
UL508 Listed, cULus; UL60950, cRUus, CE (LVD
73/23 & 93/68/EEC) EN61000-3-2, IEC 60079-
15 Class 1, Zone 2 hazardous location, Groups
IIA, IIB, IIC w/T3 temp class up to 60C
Ambient.
Protection
Class 1 (IEC536), degree of protection
SELV rated per EN60950
Environmental
Safety
Total Power:
120 - 960 Watts
Input Voltage: 1 or 3 380-480 VAC
# of Outputs:
One
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
191
www.astecpower.com
Ordering Information
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Model
Weight
Power
Input Voltage
Current
ADN5-24-3PM
1.7lbs (730g)
120W
380-480VAC
5A
ADN10-24-3PM
2.16lbs (980g)
240W
380-480VAC
10A
ADN20-24-3PM
3.97lbs. (1800g)
480W
380-480VAC
20A
ADN30-24-3PM
4.0lbs (2000g)
720W
380-480VAC
30A
ADN40-24-3PM
6.6lbs (3300g)
960W
380-480VAC
40A
ADN
Series
Catalog Number
Dimensions - inches (mm)
H
W
D
ADN5-24-3PM
4.88 (124)
2.91 (73)
4.55 (116)
Catalog Number
Dimensions - inches (mm)
H
W
D
ADN10-24-3PM
4.88 (124)
3.50 (89)
4.55 (116)
ADN20-24-3PM
4.88 (124)
5.90 (150)
4.55 (116)
ADN30-24-3PM
4.88 (124)
9.72 (247)
4.55 (116)
ADN40-24-3PM
4.88 (124)
11.10 (282)
4.55 (116)
Installation
Fusing
-Input
Internally fused.
-Output
Outputs are capable of providing high currents for short periods of time for inductive load startup or switching.
Fusing may be required for wire/loads if 2x Nominal O/P current rating cannot be tolerated. Continuous current
overload allows for reliable fuse tripping.
Mounting
Simple snap-on system for DIN Rail TS35/7.5 or TS35/15 or chassis-mounted (optional screw mounting set SDN-
PMBRK2 required).
Connections
Input: IP20-rated screw terminals, connector size range: 16-10 AWG (1.5-6 mm
2
) for solid conductors. 16-12
AWG (0.5-4 mm
2
) for standard conductors. Output: Two connectors per output, connector size range:
16-10 AWG (1.5 - 6mm
2
) for solid conductors.
Case
Fully enclosed metal housing with fine ventilation grid to keep out small parts.
-Free Space
25mm above and below
25 mm left and right
15 mm in front
70 mm above and below
25 mm left and right
15 mm in front
PDF 
ZIP