Key Features
s
Sensor range: 8 megapixels,
full frame,10 x 10 m, 100% aperture.
s
Interface: CAMERA LINK or LVDS.
s
Excellent Signal/noise ratio:
65 dB SNR.
s
Data rate: single output
at 25 MHz - 12 bits digitization.
s
Region of interest capability.
s
Other programmable settings:
binning, trigger, gain and offset
adjustment, and test pattern
generation.
Typical Applications
s
Scanning (film scanning,
document archiving).
s
X-RAY (PCB inspection,
medical/vet imaging).
s
Direct image capture
(metrology, fluorescence).
CAMELIA M1 8M
MONOCHROME
A
REASCAN
C
AMERA
Life
with
is
easier
C
A M E L I A
M 1
I
M A G I N G
C
A M E L I A
M 1
A
R E A S C A N
C
A M E R A
Detailed Specifications
Atmel manages the whole chain, from the sensor to the camera.
The result is a 12-bit camera, featuring an excellent signal-to-noise ratio.
The programmable settings let you work at different integration time, gain, offset
and trigger modes. A test pattern generator helps the user during the system integration.
The CCD sensor is able to work in 1 x 1, 2 x 2, 4 x 4 binning mode and in ROI mode.
These features allow faster preview mode.
It is also possible to control an external shutter and read back the color filter wheel
position for applications that require 3-shot color mode (film scanning, photo finishing,...).
The Camelia M1 8M Monochrome Areascan Camera is CE & FCC compliant.
adncom
- Tl. 04 38 12 44 11 - 3927 - 02-2003
Commercial Name
Resolution
M/C
Frame/Second
Interface
Pixel Size
Data Format
(m)
CAMELIA4M
2048 x 2048
Monochrome
4 fps
LVDS
14 x 14
1 tap, 12 bits
CAMELIACOL4M
2048 x 2048
Color
4 fps
LVDS
14 x 14
1 tap, 12 bits
CAMELIA4M-T20
1750 x 2300
Monochrome
20 fps
LVDS
10 x 10
4 taps, 12 bits, ROI
CAMELIA M1 8M
3500 x 2300
Monochrome
3 fps
CL*/LVDS
10 x 10
1 tap, 12 bits, ROI
CAMELIA C1 8M
3500 x 2300
Color
3 fps
CL*/LVDS
10 x 10
1 tap, 12 bits, ROI
CAMELIA8M-F10
3500 x 2300
Monochrome
10 fps
LVDS
10 x 10
4 taps, 12 bits, ROI
* Camera Link standard interface
Atmel Headquarters
Corporate Headquarters
2325 Orchard Parkway
San Jose, CA 95131
Tel: (408) 441-0311
Fax: (408) 487-2600
Europe
Atmel Sarl
Route des Arsenaux 41
Case postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg
1-24-8 shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Product Information:
Biometrics/Imaging/Hi-Rel
MPU/High Speed
Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint Egrve Cedex
France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
e-mail
literature@atmel.com
Web Site
http://www.atmel.com
Sensor Characteristics at Maximum Pixel Rate
Binning
1 x 1
2 x 2
4 x 4
Resolution (H x V)
2300 x 3500
1150 x 1750
574 x 875
Max Frame Rate
2.7 fps
4.9 fps
8.8 fps
Anti Blooming
x 8
Mechanical & Electrical Interface
Size (w x h x l) 111 x 112 x 114 mm
3
Lens Mount
F
Sensor Alignment
x,y = 125 m
z = 0-450 m
0-
x,y
= 0.2
tilt
z
= 0-260 m
Options
frame grabber for LVDS version
Power Supply
Single 24 VDC
Power Dissipation
< 6 W
Operating Temperature 0C to 50C (non condensing)
Storage Temperature -20C to 70C (non condensing)
Radiometric Performances at Maximum Pixel Rate
Dynamic Range
12 bits
Spectral Range 400 nm - 1000 nm
Non Linearity
< 1.5%
Gmin
Gnom
Gmax
Gain Range (step of 0.04 dB)
-5.1 dB
0 dB
28.9 dB
SNR (typical)
68.1 dB
64.6 dB
37.5 dB
FTC
20%
Connectors and Data Interface
Spectral Response
Responsivity at Gnom
Wavelength (nm)
LSB/nJ/cm
2
100
80
60
40
20
0
400
500
600
700
800
900
1000
1100
Version
LVDS
Camera Link
Power Connector
HR10A 6-pin
HR10A 6-pin
Data & Sync Connector
MDR 50
MDR 26
RS232 Connector
D-Sub 9-pin
Camera Link
TTL Control Connector
D-Sub 9-pin
D-Sub 9-pin
Atmel Corporation 2003.
Atmel Corporation makes no warranty for the
use of its products, other than those expressly
contained in the Company's standard war-
ranty which is detailed in Atmel's Terms and
Conditions located on the Company's web
site. The Company assumes no responsibility
for any errors which may appear in this docu-
ment, reserves the right to change devices
or specifications detailed herein at any time
without notice, and does not make any com-
mitment to update the information contained
herein. No licenses to patents or other intel-
lectual property of Atmel are granted by the
Company in connection with the sale of Atmel
products, expressly or by implication. Atmel's
products are not authorized for use as critical
components in life support devices or systems.
Atmel
is the registered trademark of Atmel.
CameliaTM is a trademark of Atmel Grenoble
S.A., Camera Link is a trademark of the AIA
(Automated Imaging Association).
Other terms and products names may be
the trademarks of others.
REF: 5322A-IMAGE-02/03 3M
Typical Application for the Camelia
M1 LV 8M
FGT Frame
Grabber
PC Computer
Camera
Control Box
Light
Source
Lens
Shutter
RS232 Cable
Data
& Sync
Cable
TTL I/O
Cable
Power Supply Cable
+24V
The LVDS version can be delivered
with FGT frame grabber and software
PDF 
ZIP