ChipFind - документация

Электронный компонент: 1110F/110M

Скачать:  PDF   ZIP
1110F1799 Manual
Cover Page
B&B Electronics Mfg Co 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd Westlink Comm. Pk Oranmore, Galway, Ireland Ph 353-91-792444 Fax 353-91-792445
Asynchronous, Carrier Controlled
Fiber Optic Modem
CE
CE
Models: 1110F 1110M
Document No. 1110F1799
International Headquarters
B&B Electronics Mfg. Co. Inc.
707 Dayton Road -- P.O. Box 1040 -- Ottawa, IL 61350 USA
Phone (815) 433-5100 -- General Fax (815) 433-5105
Home Page: www.bb-elec.com
Sales e-mail: sales@bb-elec.com -- Fax (815) 433-5109
Technical Support e-mail: support@bb.elec.com -- Fax (815) 433-5104
European Headquarters
B&B Electronics Ltd.
Westlink Commercial Park, Oranmore, Co. Galway, Ireland
Phone (353) 91 792444 -- Fax (353) 91 792445
Home Page: www.bb-europe.com
Sales e-mail: sales@bb-europe.com
Technical Support e-mail: support@bb-europe.com
1996 B&B Electronics -- Revised April 1999
1110F1799 Manual
Table of Contents
i
B&B Electronics Mfg Co 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd Westlink Comm. Pk Oranmore, Galway, Ireland Ph 353-91-792444 Fax 353-91-792445
TABLE OF CONTENTS
1.0 WARRANTY INFORMATION......................................................1
1.1 RADIO AND TV INTERFERENCE.............................................. 1
1.2 SERVICE ...................................................................................... 2
2.0 GENERAL INFORMATION..........................................................3
2.1 FEATURES ................................................................................... 3
2.2 DESCRIPTION ............................................................................. 3
3.0 CONFIGURATION.........................................................................5
3.1 SETTING THE EXTERNAL DCE/DTE SWITCH ........................ 5
3.2 SETTING INTERNAL DIP SWITCHES ....................................... 5
3.2.1 Detailed Switch Settings..........................................................6
S
WITCH
1: C
ARRIER
C
ONTROL
.............................................................. 6
S
WITCHES
2 & 3: RTS/CTS D
ELAY
...................................................... 6
S
WITCH
4: E
NABLE
C
ARRIER
D
ETECT
LED............................................ 7
S
WITCH
5: E
NABLE
F
IBER
O
PTIC
O
UTPUT
LED ...................................... 7
4.0 INSTALLATION.............................................................................8
4.1 FIBER CONNECTIONS................................................................ 8
4.2 RS-232 CONNECTION................................................................. 8
5.0 OPERATION...................................................................................9
5.1 LED STATUS MONITORS........................................................... 9
5.2 POWER UP ................................................................................... 9
APPENDIX A. SPECIFICATIONS .................................................A-1
APPENDIX B. PIN CONFIGURATIONS....................................... B-1
APPENDIX C. BLOCK DIAGRAM................................................C-1
APPENDIX D: DECLARATION OF CONFORMITY...................D-1
1110F1799 Manual
1
B&B Electronics Mfg Co 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd Westlink Comm. Pk Oranmore, Galway, Ireland Ph 353-91-792444 Fax 353-91-792445
1.0 WARRANTY INFORMATION
B&B Electronics warrants all Model 1110 components be free
from defects, and will--at our option--repair or replace the product
should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials,
and does not cover customer damage, abuse or unauthorized
modification. If this product fails or does not perform as warranted,
your sole recourse shall be repair or replacement as described
above. Under no condition shall B&B Electronics be liable for any
damages incurred by the use of this product. These damages
include, but are not limited to, the following: lost profits, lost savings
and incidental or consequential damages arising from the use of or
inability to use this product. B&B Electronics specifically disclaims
all other warranties, expressed or implied, and the installation or
use of this product shall be deemed an acceptance of these terms
by the user.
1.1 RADIO AND TV INTERFERENCE
The Model 1110 generates and uses radio frequency energy,
and if not installed and used properly--that is, in strict accordance
with the manufacturer's instructions--may cause interference to
radio and television reception. The Model 1110 has been tested
and found to comply with the limits for a CIass A computing device
in accordance with the specifications in Subpart J of Part 15 of FCC
rules, which are designed to provide reasonable protection from
such interference in a commercial installation. However, there is no
guarantee that interference will not occur in a particular installation.
If the Model 1110 does cause interference to radio or television
reception, which can be determined by turning the power off or
disconnecting the RS-232 interface, the user is encouraged to try to
correct the interference by one of the following measures: moving
the computing equipment away from the receiver, re-orienting the
receiving antenna and/or plugging the receiving equipment into a
different AC outlet (such that the computing equipment and
receiver are on different branches).
2
1110F1799 Manual
B&B Electronics Mfg Co 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd Westlink Comm. Pk Oranmore, Galway, Ireland Ph 353-91-792444 Fax 353-91-792445
1.2 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to B&B Electronics. All returns must have a
Return Materials Authorization number on the outside of the
shipping container. This number may be obtained from B&B
Electronics Customer Service Department at (815) 433-5100 x218.
Packages received without an RMA number will not be accepted
B&B Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1110. Technical Service hours:
8AM to 5PM CST, Monday
through Friday.
1110F1799 Manual
3
B&B Electronics Mfg Co 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd Westlink Comm. Pk Oranmore, Galway, Ireland Ph 353-91-792444 Fax 353-91-792445
2.0 GENERAL INFORMATION
Thank you for your purchase of this B&B Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. It any questions or
problems arise during installation or use of this product, please do
not hesitate to contact B&B Electronics Technical Support at (815)
433-5100.
2.1 FEATURES
Communicates over dual optical fibers
Data rates to 19.2 Kbps
Distances to 3.2 Km (2 miles)
Plugs directly into an RS-232 port
Immune to RFI/EMI noise, ground loops and transient surges
Easily accessible DCE/DTE switch
DIP switch-selectable carrier control
Requires no AC power or batteries
Two easy-to-read status indicators
Fits into tight installation spaces
Male or female DB-25 and SMA or ST connectors available
2.2 DESCRIPTION
The Model 1110 miniature RS-232 fiber optic modem brings
fiber to the desktop. Communicating over dual optical fibers, the
Model 1110 supports data rates to 19.2 Kbps and distances to 3.2
Km (2 miles). The Model 1110 operates full or half duplex and
plugs directly into a workstation's RS-232 port.
Like all fiber optic modems, the Model 1110 is inherently
immune to RFI/EMI noise, ground loops and transient surges. The
carrier may be switch selected as either "Continuously On" or
"Controlled by RTS", while an easily accessible DCE/DTE switch
eliminates the need for cumbersome RS-232 crossover cables. Two
easy-to-read LED indicators monitor the status of carrier detect and
fiber optic output. Drawing all necessary power from the RS-232
interface, the Model 1110 requires no AC power or batteries to
operate.