CALIFORNIA MICRO DEVICES
215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846
7/97
PRN 146/147
ZERO OHM JUMPER ARRAY
Features
Stable low resistance circuit interconnect
10 or 12 jumpers/package
Saves board space and reduces assembly cost
Industry standard SOIC and
QSOP (SSOP) packages
SCHEMATIC CONFIGURATION
Applications
Circuit Interconnect
Crossovers on PC Boards
Product Description
CMDs PRN146/147 Zero Ohm Networks in a miniature QSOP or SOIC package
, save critical board area and provide
manufacturing cost and reliability efficiencies.
Why zero ohm networks? Jumpers (or crossovers) are used as interconnects between points on a PC board. They are
typically used to connect two points to alter the circuit functionality. This provides circuit flexibility and simplicity after
board design. They may also be used as crossovers on the PC board when the layout may not permit this.
24
Wide SOIC
PRN146-S/T
PRN146-S/R
PRN146-S
24
QSOP
PRN146-Q/T
PRN146-Q/R
PRN146-Q
20
Wide SOIC
PRN147-S/T
PRN147-S/R
PRN147-S
20
QSOP
PRN147-Q/T
PRN147-Q/R
PRN147-Q
STANDARD PART ORDERING INFORMATION
Ordering Part Number
Pins
Package
Tubes
Tape & Reel
Part Marking
C0120597D
STANDARD SPECIFICATIONS
Resistance (R)
0.3 Ohms (typical)
Operating Temperature Range
0
O
C to 70C
Power Rating/Jumper
250mW
Minimum Insulation Resistance 10,000 Meg
Storage Temperature
-65
O
C to +150
O
C
Package Power Rating
1.00W, max.
C0120597D
215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 www.calmicro.com
7 / 98
1
1998 California Micro Devices Corp. All rights reserved.
P/Active
is a registered trademark and PAC is a trademark of California Micro Devices.
PDF 
ZIP