2-56
Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778 www.dialight.com
2.5 x 5mm Rectangular
Optopipe
TM
Optical Light Pipe
515-1004
1.27
[.050]
5.03
[.198]
6.91
[.272]
2.49
[.098]
7.57
[.298]
1.27
[.050]
6.60
[.260]
3.25
[.128]
4.93
[.194]
9.65
[.380]
5.86
[.231]
Ultrasonic
Weld Detail
C.L. of
LED
NOTE:
Designed for front panel mounting
DIRECTION
OF LIGHT
Dimensions in mm [inches]
Recommended
MicroLED SMT LEDs
for use with 515-1004
PART NO.
COLOR
PAGE #
597-3111-4xx
AlGaAs Red
1-28
597-3201-4xx
Orange
1-28
597-3311-4xx
Green
1-28
597-3401-4xx
Yellow
1-28
Features
UL94V-0 compliance
ESD protection (circuit isolation from front panel)
Wide viewing angle
Diffused lens
Secures to front panel by ultrasonic welding
LED Data
For absolute maximum ratings and other
electrical and optical data on the recommended
LEDs, refer to LED data sheets.
Dialight
Optopipe
Light Pipe Description
This OptopipeTM is ultrasonically welded to the customer's plastic housing using the tab at the top of the part. The light
pipe is not attached to the PCB at any point, but floats above it. The light emitting surface is textured to increase its
viewing angle. The selection of a suitable LED light source is left to the customer's discretion. However, reflector type light
sources like our 597 Series PLCC-2 or PLCC-4 Type SMT LEDs are good choices. The light pipe material is water clear
transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index.
Dialight can provide custom OptopipeTM solutions for your applications.
Operating/Storage Temperature
30C to +100C
NEW
PDF 
ZIP