2-12
Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778 www.dialight.com
1.63mm Round
Optopipe
TM
Optical Light Pipe, Panel Mount
515-1016
.51
[.020]
MAX
RECOMMENDED PLACEMENT OF LED
DIRECTION OF
LIGHT
4.14
[.163]
2.16
[.085]
1.22
[.048]
DIFFUSED FRONT
SURFACE
R .05
[.002}
MAX
1.52
[.006]
45
60
REF
(TYP)
1.63
[ .064]
.94
[ .037]
(MAJOR DIA)
.84
[ .033]
TOP
SURFACE
OF LED
Dimensions in mm [inches]
Alternative
MicroLED SMT LEDs
for use with 515-1016
PART NO.
PAGE #
597-2x01-2xx
1-25
597-2xx1-4xx
1-29
LED alternatives may not produce optimum
light output
Features
High transmissivity polycarbonate material
UL94V-0 compliance
ESD protection (circuit isolation from front panel)
Wide viewing angle
Secures to panel by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Dialight
Optopipe
Light Pipe Description
This Optopipe'sTM larger light emitting surface appears bright. It is reliably held in the panel by 3 press-fit splines.
This OptopipeTM functions as a through-the-case indicator with a textured finish on the light-emitting surface that
increases its viewing angle. The light sources can be one of Dialight's 597 Series SMT LEDs. The light source's emitting
surface should be located no more than 0.020" or 0.5mm from the OptopipeTM. The light pipe material is water clear
transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index.
Dialight can provide custom OptopipeTM solutions for your applications.
Operating/Storage Temperature
30C to +100C
NEW
PDF 
ZIP