2-52
Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778 www.dialight.com
2 x 5mm Rectangular
Optopipe
TM
Optical Light Pipe, Single
515-1054
2.29
[.090]
3.30
[.130]
5.08
[.200]
4.32
[.170]
1.14
[.045]
7.62
[.300]
1.65
[.065]
FRONT PANEL NOT SHOWN IN THIS VIEW
7.62
.08
[.300
.003]
1.65
[.065]
4.45
[.175]
2.21
[.087]
2.41
[.095]
TYP
5.00
[.197]
.076
.002
TYP; 2 PLCS
RECOMMENDED SOLDER PAD/HOLE LAYOUT
8.89
[.350]
11.43
[.450]
8.89
[.350]
2.01
[.079]
2 PLCS
2.79
[.11]
FRONT
PANEL
DIRECTION
OF LIGHT
2.00
[.080]
DIFFUSED
FRONT
SURFACE
3.18
[.125]
Dimensions in mm [inches]
MicroLED SMT LEDs
for use with 515-1054
PART NO.
PAGE #
Recommeded
597-3xx1-2xx
1-21
597-77x1-2xx
1-23
Alternatives
597-3xx1-5xx
1-30
597-77x1-5xx
1-31
LED alternatives may not produce optimum light
output
Solder Pad/Holes layout shown is for single color
LEDs listed under "Recommended" category
Contact factory for other layouts
Features
Compatible with Dialight's 515-1051
High transmissivity polycarbonate material
UL94V-0 compliance
ESD protection (circuit isolation from front panel)
Wide viewing angle
Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Dialight
Optopipe
Light Pipe Description
This OptopipeTM functions as a through-the-case indicator with the appearance of a single 2 x 5mm rectangular LED.
It can utilize either a single or multi-color SMT LED, and can be used to form longer arrays with the 515-1051 light pipe. It
is held to the PCB by 2 press-fit pins. The light pipe material is water clear transmissive polycarbonate rated UL94-V0,
and has a 35% oxygen index.
Dialight can provide custom OptopipeTM solutions for your applications.
Operating/Storage Temperature
30C to +100C
NOTE: designed for
post-reflow
PC board insertion.
NEW
PDF 
ZIP