EM78P153S
OTP ROM
Specification Revision History
Version
Content
1.1 Initial
version
1.2
Change Initialized Register Values, Internal RC Drift Rate, DC and AC
Electrical Characteristic
05/02/2003
1.3
Change Power on reset content
06/25/2003
1.4
Add the Device Characteristic at section 6.3
12/31/2003
Application Note
AN-001 Q & A on ICE153S
AN-002 The Set-up Timing and Pin Change Wake-up Function Application
AN-003 Internal RC Oscillator Mode
This specification is subject to change without prior notice.
4. 1.2004 (V1.4)
2
EM78P153S
OTP ROM
1. GENERAL DESCRIPTION
EM78P153S is an 8-bit microprocessor with low-power and high-speed CMOS technology. It is equipped
with a 1024*13-bits Electrical One Time Programmable Read Only Memory (OTP-ROM) within it. It
provides a PROTECTION bit to prevent intrusion of user's code in the OTP memory as well as 15
OPTION bits to match user's requirements.
With its OTP-ROM feature, the EM78P153S offers users a convenient way of developing and verifying
their programs. Moreover, user developed code can be easily programmed with the ELAN writer.
This specification is subject to change without prior notice.
4. 1.2004 (V1.4)
3
EM78P153S
OTP ROM
2. FEATURES
14-lead packages : EM78P153S
Operating voltage range : 2.3V~5.5V
Available in temperature range: 0
C~70C
Operating frequency range (base on 2 clocks):
* Crystal mode: DC~20MHz at 5V, DC~8MHz at 3V, DC~4MHz at 2.3V.
* ERC mode: DC~4MHz at 5V, DC~4MHz at 3V, DC~4MHz at 2.3V.
Low power consumption:
* less then 1.5 mA at 5V/4MHz
* typical of 15
A, at 3V/32KHz
* typical of 1
A, during the sleep mode
1024
13 bits on chip ROM
Built-in calibrated IRC oscillators (8MHz, 4MHz, 1MHz, 455KHz )
Programmable prescaler of oscillator set-up time
One security register to prevent the code in the OTP memory from intruding
One configuration register to match the user's requirements
32
8 bits on chip registers (SRAM, general purpose register)
2 bi-directional I/O ports
5 level stacks for subroutine nesting
8-bit real time clock/counter (TCC) with selective signal sources and trigger edges, and with overflow interrupt
Power down mode (SLEEP mode)
Three available interruptions
* TCC overflow interrupt
* Input-port status changed interrupt (wake up from the sleep mode)
* External interrupt
Programmable free running watchdog timer
7 programmable pull-high I/O pins
7 programmable open-drain I/O pins
6 programmable pull-down I/O pins
Two clocks per instruction cycle
Package type: 14 pins SOP, DIP
* 14 pin DIP 300mil: EM78P153SP
This specification is subject to change without prior notice.
4. 1.2004 (V1.4)
4
PDF 
ZIP
