Data Sheet
Data Sheet
Multilayer ceramic capacitors
Date:
October 2006
EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the
information contained therein without EPCOS' prior express consent is prohibited.
Chip capacitors, X7R
2
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering code system
B37941
K
5
102
K
0
60
Packaging
60 cardboard tape, 180-mm reel
62 blister tape, 180-mm reel
70 cardboard tape, 330-mm reel
72 blister tape, 330-mm reel
01 bulk case
^
^
^
^
^
Internal coding
Capacitance tolerance
J
5%
K
10% (standard)
M
20%
^
^
^
Rated voltage
Rated voltage [VDC]
Code
25
50
100
200
500
0
1
2
3
Termination
Standard:
On request:
K
nickel barrier for all case sizes
J
silver-palladium for conductive adhesion: all case sizes
^
^
Type and size
Chip size
(inch / mm)
0603 / 1608
0805 / 2012
1206 / 3216
1210 / 3225
1812 / 4532
2220 / 5750
Temperature characteristic
X7R
B37931
B37941
B37872
B37950
B37953
B37956
Capacitance, coded
(example)
102
10 10
2
pF =
1 nF
104
10 10
4
pF = 100 nF
223
22 10
3
pF = 22 nF
^
^
^
16
9
5
Chip
X7R
Multilayer ceramic capacitors
3
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Features
High volumetric efficiency
Non-linear capacitance change
High insulation resistance
High pulse strength
To AEC-Q200
Applications
Blocking and coupling
Decoupling
Interference suppression
Termination
For soldering: Nickel barrier termination (Ni)
For conductive adhesion: Silver-palladium termination (AgPd) on request
Options
Alternative capacitance tolerances available on request
Delivery mode
Cardboard and blister tape (blister tape for chip thickness
1.2 0.1 mm and case sizes 1210),
180-mm and 330-mm reel available
Bulk case for case sizes 0603 (16 V, 25 V, 50 V) and 0805 (50 V)
Electrical data
Temperature characteristic
X7R
Max. relative capacitance change
within 55
C to +125 C
DC/C
15
%
Climatic category (IEC 60068-1)
55/125/56
Standard
EIA
Dielectric
Class 2
Rated voltage
1)
V
R
16, 25, 50, 100, 200, 500
VDC
Test voltage
V
test
2.5 V
R
/5 s
VDC
Capacitance range
2)
/ E series
C
R
100 pF ... 1 F (E3/E6)
Dissipation factor (limit value)
tan
d
< 25 10
3
< 35 10
3
for 16 V
Insulation resistance
3)
at + 25
C
R
ins
>10
5
M
W
Insulation resistance
3)
at +125
C
R
ins
>10
4
M
W
Time constant
3)
at + 25
C
t >1000
s
Time constant
3)
at +125
C
t >100
s
Operating temperature range
T
op
55 ... +125
C
Ageing
4)
yes
1) Note: No operation on AC line.
3) For C
R
>10 nF the time constant
t = C R
ins
is given.
2) See also chapter "HighCV".
4) Refer to chapter "General technical information", "Ageing".
Chip
X7R
Multilayer ceramic capacitors
4
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer ceramic capacitors
X7R
Capacitance tolerances
Dimensional drawing
Dimensions (mm)
Tolerances to CECC 32101-801
Code letter
J
K
(standard)
M
Tolerance
5%
10%
20%
Case size
(inch)
(mm)
0603
1608
0805
2012
1206
3216
l
1.6
0.15
2.00
0.20
3.20
0.20
b
0.8
0.10
1.25
0.15
1.60
0.15
s
0.8
0.10
1.35 max.
1.30 max.
k
0.1 0.40
0.13 0.75
0.25 0.75
Case size
(inch)
(mm)
1210
3225
1812
4532
2220
5750
l
3.20
0.30
4.50
0.30
5.7
0.40
b
2.50
0.30
3.20
0.30
5.0
0.40
s
1.70 max.
1.30 max.
1.30 max.
k
0.25 0.75
0.25 1.0
0.25 1.0
KKE0329-N
k
s
b
k
X7R
Multilayer ceramic capacitors
5
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
X7R
Recommended solder pad
Recommended dimensions (mm) for reflow soldering
Recommended dimensions (mm) for wave soldering
Termination
Case size
(inch/mm)
Type
A
C
D
0603/1608
single chip
0.6 ... 0.7
1.8 ... 2.2
0.6 ... 0.8
0805/2012
single chip
0.6 ... 0.7
2.2 ... 2.6
0.8 ... 1.1
1206/3216
single chip
0.8 ... 0.9
3.8 ... 4.32
1.0 ... 1.4
1210/3225
single chip
1.0 ... 1.2
4.0 ... 4.8
1.8 ... 2.3
1812/4532
single chip
1.2 ... 1.4
5.4 ... 6.3
2.3 ... 3.0
2220/5750
single chip
1.4 ... 1.6
6.8 ... 7.8
3.5 ... 4.8
Case size
(inch/mm)
Type
A
C
D
0603/1608
single chip
0.8 ... 0.9
2.2 ... 2.8
0.6 ... 0.8
0805/2012
single chip
0.9 ... 1.0
2.8 ... 3.2
0.8 ... 1.1
1206/3216
single chip
1.0 ... 1.1
4.2 ... 4.8
1.0 ... 1.4
KKE0308-1
D
A
C
BME: Base Metal Electrode
NME: Noble Metal Electrode
External electrode
Intermediate electrode
Substrate electrode
Inner electrode
BME
NME
KKE0485-5-E
Sn
Ni
Ag
Ni
Sn
Cu
NME
AgPd
Ni
BME
Ceramic body
(nickel barrier)
Termination
X7R
6
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer ceramic capacitors
X7R
Product range chip capacitors, X7R
Size
1)
inch
mm
0603
1608
0805
2012
Type
B37931
B37941
16
25
50
100
16
25
50
100
200
100 pF
120 pF
2)
150 pF
180 pF
2)
220 pF
270 pF
2)
330 pF
390 pF
2)
470 pF
560 pF
2)
680 pF
820 pF
2)
1.0 nF
1.2 nF
2)
1.5 nF
1.8 nF
2)
2.2 nF
2.7 nF
2)
3.3 nF
3.9 nF
2)
4.7 nF
5.6 nF
2)
6.8 nF
8.2 nF
2)
1) l
b (inch) / l b (mm)
2) Non standard types (E 12) on request.
V
R
(VDC)
C
R
X7R
Multilayer ceramic capacitors
7
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
X7R
Product range chip capacitors, X7R
Size
1)
inch
mm
0603
1608
0805
2012
Type
B37931
B37941
16
25
50
100
16
25
50
100
200
10 nF
12
nF
2)
15 nF
18
nF
2)
22 nF
27
nF
2)
33 nF
39
nF
2)
47 nF
56
nF
2)
68 nF
3)
82
nF
2)
100 nF
3)
220 nF
3)
3)
3)
3)
3)
330 nF
3)
3)
3)
470 nF
3)
3)
3)
1.0
mF
3)
3)
3)
2.2
mF
1) l
b (inch) / l b (mm)
2) Non standard types (E 12) on request.
3) See HighCV product range for specification.
V
R
(VDC)
C
R
X7R
8
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer ceramic capacitors
X7R
Product range chip capacitors, X7R
Size
1)
inch
mm
1206
3216
Type
B37872
16
25
50
100
200
500
100 pF
120 pF
2)
150 pF
180 pF
2)
220 pF
270 pF
2)
330 pF
390 pF
2)
470 pF
560 pF
2)
680 pF
820 pF
2)
1.0 nF
1.2 nF
2)
1.5 nF
1.8 nF
2)
2.2 nF
2.7 nF
2)
3.3 nF
3.9 nF
2)
4.7 nF
5.6 nF
2)
6.8 nF
8.2 nF
2)
1) l
b (inch) / l b (mm)
2) Non standard types (E 12) on request.
V
R
(VDC)
C
R
X7R
Multilayer ceramic capacitors
9
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
X7R
Product range chip capacitors, X7R
Size
1)
inch
mm
1206
3216
Type
B37872
16
25
50
100
200
500
10 nF
12
nF
2)
15 nF
18
nF
2)
22 nF
27
nF
2)
33 nF
39
nF
2)
47 nF
56
nF
2)
68 nF
82
nF
2)
100 nF
220 nF
330 nF
470 nF
1.0
mF
3)
3)
3)
2.2
mF
3)
3)
1) l
b (inch) / l b (mm)
2) Non standard types (E 12) on request.
3) See HighCV product range for specification.
V
R
(VDC)
C
R
X7R
10
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer ceramic capacitors
X7R
Product range chip capacitors, X7R
Size
1)
inch
mm
1210
3225
1812
4532
2220
5750
Type
B37950
B37953
B37956
50
100
200
500
50
50
1.0 nF
1.5 nF
2.2 nF
3.3 nF
3.9 nF
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
1.0
mF
1) l
b (inch) / l b (mm)
V
R
(VDC)
C
R
X7R
Multilayer ceramic capacitors
11
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
X7R
Ordering codes and packing for X7R, 16 and 25 VDC, nickel barrier terminations
Chip
thickness
Cardboard tape,
180-mm reel
Cardboard tape,
330-mm reel
Bulk case
**
60
**
70
**
01
C
R
1)
Ordering code
2)
mm
pcs/reel
pcs/reel
pcs
Case size 0603, 16 VDC
22
.
nF
B37931K9223K0**
0.8
0.1
4000
16000
15000
33
.
nF
B37931K9333K0**
0.8
0.1
4000
16000
15000
47
.
nF
B37931K9473K0**
0.8
0.1
4000
16000
15000
68
.
nF
B37931K9683K0**
0.8
0.1
4000
16000
15000
100
.
nF
B37931K9104K0**
0.8
0.1
4000
16000
15000
Case size 0603, 25 VDC
10
.
nF
B37931K0103K0**
0.8
0.1
4000
16000
15000
15
.
nF
B37931K0153K0**
0.8
0.1
4000
16000
15000
22
.
nF
B37931K0223K0**
0.8
0.1
4000
16000
15000
33
.
nF
B37931K0333K0**
0.8
0.1
4000
16000
15000
47
.
nF
B37931K0473K0**
0.8
0.1
4000
16000
15000
68
.
nF
B37931K0683K0**
0.8
0.1
4000
16000
15000
100
.
nF
B37931K0104K0**
0.8
0.1
4000
16000
15000
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
^
^
^
X7R; 0603
12
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer ceramic capacitors
X7R
Ordering codes and packing for X7R, 50 VDC, nickel barrier terminations
Chip
thickness
Cardboard tape,
180-mm reel
Cardboard tape,
330-mm reel
Bulk case
**
60
**
70
**
01
C
R
Ordering code
1)
mm
pcs/reel
pcs/reel
pcs
Case size 0603, 50 VDC
220
.
pF
B37931K5221K0**
0.8
0.1
4000
16000
15000
270
.
pF
2)
B37931K5271K0**
0.8
0.1
4000
16000
15000
330
.
pF
B37931K5331K0**
0.8
0.1
4000
16000
15000
390
.
pF
2)
B37931K5391K0**
0.8
0.1
4000
16000
15000
470
.
pF
B37931K5471K0**
0.8
0.1
4000
16000
15000
560
.
pF
2)
B37931K5561K0**
0.8
0.1
4000
16000
15000
680
.
pF
B37931K5681K0**
0.8
0.1
4000
16000
15000
820
.
pF
2)
B37931K5821K0**
0.8
0.1
4000
16000
15000
1.0 nF
B37931K5102K0**
0.8
0.1
4000
16000
15000
1.2 nF
2)
B37931K5122K0**
0.8
0.1
4000
16000
15000
1.5 nF
B37931K5152K0**
0.8
0.1
4000
16000
15000
1.8 nF
2)
B37931K5182K0**
0.8
0.1
4000
16000
15000
2.2 nF
B37931K5222K0**
0.8
0.1
4000
16000
15000
2.7 nF
2)
B37931K5272K0**
0.8
0.1
4000
16000
15000
3.3 nF
B37931K5332K0**
0.8
0.1
4000
16000
15000
3.9 nF
2)
B37931K5392K0**
0.8
0.1
4000
16000
15000
4.7 nF
B37931K5472K0**
0.8
0.1
4000
16000
15000
5.6 nF
2)
B37931K5562K0**
0.8
0.1
4000
16000
15000
6.8 nF
B37931K5682K0**
0.8
0.1
4000
16000
15000
8.2 nF
2)
B37931K5822K0**
0.8
0.1
4000
16000
15000
10
.
nF
B37931K5103K0**
0.8
0.1
4000
16000
15000
12
nF
2)
B37931K5123K0**
0.8
0.1
4000
16000
15000
15
.
nF
B37931K5153K0**
0.8
0.1
4000
16000
15000
18
nF
2)
B37931K5183K0**
0.8
0.1
4000
16000
15000
22
.
nF
B37931K5223K0**
0.8
0.1
4000
16000
15000
27
nF
2)
B37931K5273K0**
0.8
0.1
4000
16000
15000
33
.
nF
B37931K5333K0**
0.8
0.1
4000
16000
15000
39
nF
2)
B37931K5393K0**
0.8
0.1
4000
16000
15000
47
.
nF
B37931K5473K0**
0.8
0.1
4000
16000
15000
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
2) Non standard types (E 12) on request.
^
^
^
X7R; 0603
Multilayer ceramic capacitors
13
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
X7R
Ordering codes and packing for X7R, 100 VDC, nickel barrier terminations
Chip
thickness
Cardboard tape,
180-mm reel
Cardboard tape,
330-mm reel
Bulk case
**
60
**
70
**
01
C
R
1)
Ordering code
2)
mm
pcs/reel
pcs/reel
pcs
Case size 0603, 100 VDC
100
.
pF
B37931K1101K0**
0.8
0.1
4000
16000
150
.
pF
B37931K1151K0**
0.8
0.1
4000
16000
220
.
pF
B37931K1221K0**
0.8
0.1
4000
16000
330
.
pF
B37931K1331K0**
0.8
0.1
4000
16000
470
.
pF
B37931K1471K0**
0.8
0.1
4000
16000
680
.
pF
B37931K1681K0**
0.8
0.1
4000
16000
1.0 nF
B37931K1102K0**
0.8
0.1
4000
16000
1.5 nF
B37931K1152K0**
0.8
0.1
4000
16000
2.2 nF
B37931K1222K0**
0.8
0.1
4000
16000
3.3 nF
B37931K1332K0**
0.8
0.1
4000
16000
4.7 nF
B37931K1472K0**
0.8
0.1
4000
16000
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
^
^
^
X7R; 0603
14
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer ceramic capacitors
X7R
Ordering codes and packing for X7R, 25 and 50 VDC, nickel barrier terminations
Chip
thickness
Cardboard tape,
180-mm reel
Cardboard tape,
330-mm reel
Bulk case
**
60
**
70
**
01
C
R
Ordering code
1)
mm
pcs/reel
pcs/reel
pcs
Case size 0805, 25 VDC
100
.
nF
B37941K0104K0**
0.8
0.1
4000
16000
100
.
nF
B37941K0104K0**
1.25
0.1
3000
3)
12000
4)
Case size 0805, 50 VDC
470
.
pF
B37941K5471K0**
0.6
0.1
5000
20000
10000
560
.
pF
2)
B37941K5561K0**
0.6
0.1
5000
20000
10000
680
.
pF
B37941K5681K0**
0.6
0.1
5000
20000
10000
820
.
pF
2)
B37941K5821K0**
0.6
0.1
5000
20000
10000
1.0 nF
B37941K5102K0**
0.6
0.1
5000
20000
10000
1.2 nF
2)
B37941K5122K0**
0.6
0.1
5000
20000
10000
1.5 nF
B37941K5152K0**
0.6
0.1
5000
20000
10000
1.8 nF
2)
B37941K5182K0**
0.6
0.1
5000
20000
10000
2.2 nF
B37941K5222K0**
0.6
0.1
5000
20000
10000
2.7 nF
2)
B37941K5272K0**
0.6
0.1
5000
20000
10000
3.3 nF
B37941K5332K0**
0.6
0.1
5000
20000
10000
3.9 nF
2)
B37941K5392K0**
0.6
0.1
5000
20000
10000
4.7 nF
B37941K5472K0**
0.6
0.1
5000
20000
10000
5.6 nF
2)
B37941K5562K0**
0.6
0.1
5000
20000
10000
6.8 nF
B37941K5682K0**
0.6
0.1
5000
20000
10000
8.2 nF
2)
B37941K5822K0**
0.6
0.1
5000
20000
10000
10
.
nF
B37941K5103K0**
0.6
0.1
5000
20000
10000
12
nF
2)
B37941K5123K0**
0.6
0.1
5000
20000
10000
15
.
nF
B37941K5153K0**
0.6
0.1
5000
20000
10000
18
nF
2)
B37941K5183K0**
0.6
0.1
5000
20000
10000
22
.
nF
B37941K5223K0**
0.6
0.1
5000
20000
10000
27
nF
2)
B37941K5273K0**
0.6
0.1
5000
20000
10000
33
.
nF
B37941K5333K0**
0.6
0.1
5000
20000
10000
39
nF
2)
B37941K5393K0**
0.6
0.1
5000
20000
10000
47
.
nF
B37941K5473K0**
0.6
0.1
5000
20000
10000
56
nF
2)
B37941K5563K0**
0.8
0.1
4000
16000
68
.
nF
B37941K5683K0**
0.8
0.1
4000
16000
68
.
nF
B37941K5683K0**
1.25
0.1
3000
3)
12000
4)
82
nF
2)
B37941K5823K0**
0.8
0.1
4000
16000
100
.
nF
B37941K5104K0**
0.8
0.1
4000
16000
100
.
nF
B37941K5104K0**
1.25
0.1
3000
3)
12000
4)
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
2) Non standard types (E 12) on request.
3) Blister tape, 180-mm reel, ordering code **
62
4) Blister tape, 330-mm reel, ordering code **
72
^
^
^
^
^
X7R; 0805
Multilayer ceramic capacitors
15
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
X7R
Ordering codes and packing for X7R, 100 and 200 VDC, nickel barrier terminations
Chip
thickness
Cardboard tape,
180-mm reel
Cardboard tape,
330-mm reel
**
60
**
70
C
R
1)
Ordering code
2)
mm
pcs/reel
pcs/reel
Case size 0805, 100 VDC
470
.
pF
B37941K1471K0**
0.6
0.1
5000
20000
680
.
pF
B37941K1681K0**
0.6
0.1
5000
20000
1.0 nF
B37941K1102K0**
0.6
0.1
5000
20000
1.5 nF
B37941K1152K0**
0.6
0.1
5000
20000
2.2 nF
B37941K1222K0**
0.6
0.1
5000
20000
3.3 nF
B37941K1332K0**
0.6
0.1
5000
20000
4.7 nF
B37941K1472K0**
0.6
0.1
5000
20000
6.8 nF
B37941K1682K0**
0.6
0.1
5000
20000
10
.
nF
B37941K1103K0**
0.6
0.1
5000
20000
15
.
nF
B37941K1153K0**
0.6
0.1
5000
20000
22
.
nF
B37941K1223K0**
0.8
0.1
4000
16000
Case size 0805, 200 VDC
220
.
pF
B37941K2221K0**
0.8
0.1
4000
16000
330
.
pF
B37941K2331K0**
0.8
0.1
4000
16000
470
.
pF
B37941K2471K0**
0.8
0.1
4000
16000
680
.
pF
B37941K2681K0**
0.8
0.1
4000
16000
1.0 nF
B37941K2102K0**
0.8
0.1
4000
16000
1.5 nF
B37941K2152K0**
0.8
0.1
4000
16000
2.2 nF
B37941K2222K0**
0.8
0.1
4000
16000
3.3 nF
B37941K2332K0**
0.8
0.1
4000
16000
4.7 nF
B37941K2472K0**
1.2
0.1
3000
3)
12000
4)
6.8 nF
B37941K2682K0**
1.2
0.1
3000
3)
12000
4)
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
3) Blister tape, 180-mm reel, ordering code **
62
4) Blister tape, 330-mm reel, ordering code **
72
^
^
^
^
X7R; 0805
16
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer ceramic capacitors
X7R
Ordering codes and packing for X7R, 50 VDC, nickel barrier terminations
Chip thickness
Cardboard tape,
180-mm reel
Cardboard tape,
330-mm reel
**
60
**
70
C
R
Ordering code
1)
mm
pcs/reel
pcs/reel
Case size 1206, 50 VDC
1.0 nF
B37872K5102K0**
0.8
0.1
4000
16000
1.2 nF
2)
B37872K5122K0**
0.8
0.1
4000
16000
1.5 nF
B37872K5152K0**
0.8
0.1
4000
16000
1.8 nF
2)
B37872K5182K0**
0.8
0.1
4000
16000
2.2 nF
B37872K5222K0**
0.8
0.1
4000
16000
2.7 nF
2)
B37872K5272K0**
0.8
0.1
4000
16000
3.3 nF
B37872K5332K0**
0.8
0.1
4000
16000
3.9 nF
2)
B37872K5392K0**
0.8
0.1
4000
16000
4.7 nF
B37872K5472K0**
0.8
0.1
4000
16000
5.6 nF
2)
B37872K5562K0**
0.8
0.1
4000
16000
6.8 nF
B37872K5682K0**
0.8
0.1
4000
16000
8.2 nF
2)
B37872K5822K0**
0.8
0.1
4000
16000
10
.
nF
B37872K5103K0**
0.8
0.1
4000
16000
12
nF
2)
B37872K5123K0**
0.8
0.1
4000
16000
15
.
nF
B37872K5153K0**
0.8
0.1
4000
16000
18
nF
2)
B37872K5183K0**
0.8
0.1
4000
16000
22
.
nF
B37872K5223K0**
0.8
0.1
4000
16000
27
nF
2)
B37872K5273K0**
0.8
0.1
4000
16000
33
.
nF
B37872K5333K0**
0.8
0.1
4000
16000
39
nF
2)
B37872K5393K0**
0.8
0.1
4000
16000
47
.
nF
B37872K5473K0**
0.8
0.1
4000
16000
56
nF
2)
B37872K5563K0**
0.8
0.1
4000
16000
68
.
nF
B37872K5683K0**
0.8
0.1
4000
16000
82
nF
2)
B37872K5823K0**
0.8
0.1
4000
16000
100
.
nF
B37872K5104K0**
0.8
0.1
4000
16000
220
.
nF
B37872K5224K0**
1.2
0.1
3000
3)
12000
4)
330
.
nF
B37872K5334K0**
1.2
0.1
3000
3)
12000
4)
470
.
nF
B37872K5474K0**
1.2
0.1
3000
3)
12000
4)
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
2) Non standard types (E 12) on request.
3) Blister tape, 180-mm reel, ordering code **
62
4) Blister tape, 330-mm reel, ordering code **
72
^
^
^
^
X7R; 1206
Multilayer ceramic capacitors
17
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
X7R
Ordering codes and packing for X7R, 100, 200 and 500 VDC, nickel barrier terminations
Chip thickness
Cardboard tape,
180-mm reel
Cardboard tape,
330-mm reel
**
60
**
70
C
R
1)
Ordering code
2)
mm
pcs/reel
pcs/reel
Case size 1206, 100 VDC
1.0 nF
B37872K1102K0**
0.8
0.1
4000
16000
1.5 nF
B37872K1152K0**
0.8
0.1
4000
16000
2.2 nF
B37872K1222K0**
0.8
0.1
4000
16000
3.3 nF
B37872K1332K0**
0.8
0.1
4000
16000
4.7 nF
B37872K1472K0**
0.8
0.1
4000
16000
6.8 nF
B37872K1682K0**
0.8
0.1
4000
16000
10
.
nF
B37872K1103K0**
0.8
0.1
4000
16000
15
.
nF
B37872K1153K0**
0.8
0.1
4000
16000
22
.
nF
B37872K1223K0**
0.8
0.1
4000
16000
33
.
nF
B37872K1333K0**
0.8
0.1
4000
16000
47
.
nF
B37872K1473K0**
0.8
0.1
4000
16000
68
.
nF
B37872K1683K0**
1.2
0.1
3000
3)
12000
4)
100
.
nF
B37872K1104K0**
1.2
0.1
3000
3)
12000
4)
Case size 1206, 200 VDC
820
.
pF
B37872K2821K0**
0.8
0.1
4000
16000
1.0 nF
B37872K2102K0**
0.8
0.1
4000
16000
1.5 nF
B37872K2152K0**
0.8
0.1
4000
16000
2.2 nF
B37872K2222K0**
0.8
0.1
4000
16000
3.3 nF
B37872K2332K0**
0.8
0.1
4000
16000
4.7 nF
B37872K2472K0**
0.8
0.1
4000
16000
6.8 nF
B37872K2682K0**
0.8
0.1
4000
16000
10
.
nF
B37872K2103K0**
0.8
0.1
4000
16000
15
.
nF
B37872K2153K0**
1.2
0.1
3000
3)
12000
4)
22
.
nF
B37872K2223K0**
1.2
0.1
3000
3)
12000
4)
Case size 1206, 500 VDC
470
.
pF
B37872K3471K0**
0.8
0.1
4000
16000
680
.
pF
B37872K3681K0**
0.8
0.1
4000
16000
1.0 nF
B37872K3102K0**
0.8
0.1
4000
16000
1.5 nF
B37872K3152K0**
0.8
0.1
4000
16000
2.2 nF
B37872K3222K0**
0.8
0.1
4000
16000
3.3 nF
B37872K3332K0**
1.2
0.1
3000
3)
12000
4)
4.7 nF
B37872K3472K0**
1.2
0.1
3000
3)
12000
4)
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
3) Blister tape, 180-mm reel, ordering code **
62
4) Blister tape, 330-mm reel, ordering code **
72
^
^
^
^
X7R; 1206
18
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer ceramic capacitors
X7R
Ordering codes and packing for X7R, 50, 100, 200 and 500 VDC, nickel barrier terminations
Chip thickness
Blister tape,
180-mm reel
Blister tape,
330-mm reel
**
62
**
72
C
R
1)
Ordering code
2)
mm
pcs/reel
pcs/reel
Case size 1210, 50 VDC
10
.
nF
B37950K5103K0**
0.8
0.1
4000
16000
22
.
nF
B37950K5223K0**
0.8
0.1
4000
16000
47
.
nF
B37950K5473K0**
0.8
0.1
4000
16000
100
.
nF
B37950K5104K0**
0.8
0.1
4000
16000
220
.
nF
B37950K5224K0**
1.2
0.1
3000
12000
Case size 1210, 100 VDC
10
.
nF
B37950K1103K0**
0.8
0.1
4000
16000
15
.
nF
B37950K1153K0**
0.8
0.1
4000
16000
22
.
nF
B37950K1223K0**
0.8
0.1
4000
16000
33
.
nF
B37950K1333K0**
0.8
0.1
4000
16000
47
.
nF
B37950K1473K0**
0.8
0.1
4000
16000
68
.
nF
B37950K1683K0**
0.8
0.1
4000
16000
100
.
nF
B37950K1104K0**
0.8
0.1
4000
16000
150
.
nF
B37950K1154K0**
1.2
0.1
3000
12000
Case size 1210, 200 VDC
3.9 nF
B37950K2392K0**
0.8
0.1
4000
16000
4.7 nF
B37950K2472K0**
0.8
0.1
4000
16000
6.8 nF
B37950K2682K0**
0.8
0.1
4000
16000
10
.
nF
B37950K2103K0**
0.8
0.1
4000
16000
15
.
nF
B37950K2153K0**
0.8
0.1
4000
16000
22
.
nF
B37950K2223K0**
1.2
0.1
3000
12000
33
.
nF
B37950K2333K0**
1.2
0.1
3000
12000
47
.
nF
B37950K2473K0**
1.6
0.1
2000
8000
Case size 1210, 500 VDC
1.0 nF
B37950K3102K0**
0.8
0.1
4000
16000
1.5 nF
B37950K3152K0**
0.8
0.1
4000
16000
2.2 nF
B37950K3222K0**
0.8
0.1
4000
16000
3.3 nF
B37950K3332K0**
0.8
0.1
4000
16000
4.7 nF
B37950K3472K0**
1.2
0.1
3000
12000
6.8 nF
B37950K3682K0**
1.2
0.1
3000
12000
10
.
nF
B37950K3103K0**
1.6
0.1
2000
8000
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
^
^
X7R; 1210
Multilayer ceramic capacitors
19
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
X7R
Ordering codes and packing for X7R, 50 VDC, nickel barrier terminations
Chip thickness
Blister tape,
180-mm reel
Blister tape,
330-mm reel
**
62
**
72
C
R
1)
Ordering code
2)
mm
pcs/reel
pcs/reel
Case size 1812, 50 VDC
100
.
nF
B37953K5104K0**
1.2
0.1
1500
5000
220
.
nF
B37953K5224K0**
1.2
0.1
1500
5000
330
.
nF
B37953K5334K0**
1.2
0.1
1500
5000
470
.
nF
B37953K5474K0**
1.2
0.1
1500
5000
Case size 2220, 50 VDC
470
.
nF
B37956K5474K0**
1.2
0.1
1500
5000
1.0
mF
B37956K5105K0**
1.2
0.1
1500
5000
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
^
^
X7R; 1812 and 2220
20
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer ceramic capacitors
X7R
Typical characteristics
1)
Capacitance change
DC/C
25
versus
temperature T for NME
Capacitance change
DC/C
25
versus
temperature T for BME
Capacitance change
DC/C
0
versus
superimposed DC voltage V for NME
Capacitance change
DC/C
0
versus
superimposed DC voltage V for BME
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
KKE0390-Z
C
25
T
C
0
20 40 60 80 100
140
%
_
60
_
40
_
20
_
C
50
_
45
_
40
_
35
_
30
_
25
_
20
_
15
_
5
_
0
5
15
10
_
KKE0391-8
T
0
20 40 60 80 100
140
%
_
60
_
40
_
20
_
C
50
_
45
_
40
_
35
_
30
_
25
_
20
_
15
_
5
_
0
5
15
10
_
C
25
C
KKE0392-G
C
0
V
C
%
_
0
70
_
40
80
120
160
V
60
_
_
50
_
_
40
_
_
30
_
_
20
_
_
10
_
_
0
10
200
10 nF/200 V/size 1206
KKE0402-S
V
%
_
70
_
0
C
0
C
5 10 15 20 25 30 35 40 45
V
60
_
50
_
40
_
30
_
20
_
10
_
0
10
50
100 nF/50 V/size 0805
X7R
Multilayer ceramic capacitors
21
10/06
Please read Cautions and warnings and
Important notes at the end of this document.
X7R
Typical characteristics
1)
Impedance |Z| versus
frequency f
Dissipation factor tan
d versus
temperature T
Insulation resistance R
ins
versus
temperature T
Capacitance change
DC/C
1
versus
time t
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
KKE0188-B
Z
f
220 nF
10
0
1
10
2
10
3
10
10
0
1
10
2
10
3
10
10
4
22 nF
2.2 nF
220 pF
MHz
2
10
_
10
_
1
KKE0189-J
T
tan
0
20 40 60 80 100
140
60
_
40
_
20
_
1
10
_
10
_
2
10
_
3
C
KKE0190-M
0
T
ins
8
10
10
6
10
5
10
4
10
3
10
2
M
R
20
40
60
80
100
140
C
KKE0394-X
5
10
%
0
5
_
_
C
1
C
10
_
_
15
_
_
20
_
_
t
h
0
10
1
10
2
10
10
3
10
4
5
10
X7R
22
10/06
Multilayer ceramic capacitors
Cautions and warnings
Notes on the selection of ceramic capacitors
In the selection of ceramic capacitors, the following criteria must be considered:
1. Depending on the application, ceramic capacitors used to meet high quality requirements should
at least satisfy the specifications to AEC-Q200. They must meet quality requirements going
beyond this level in terms of ruggedness (e.g. mechanical, thermal or electrical) in the case of
critical circuit configurations and applications (e.g. in safety-relevant applications such as ABS
and airbag equipment or durable industrial goods).
2. At the connection to the battery or power supply (e.g. clamp 15 or 30 in the automobile) and at
positions with stranding potential, to reduce the probability of short circuits following a fracture,
two ceramic capacitors must be connected in series and/or a ceramic capacitor with integrated
series circuit should be used. The MLSC from EPCOS contains such a series circuit in a single
component.
3. Ceramic capacitors with the temperature characteristics Z5U and Y5V do not satisfy the require-
ments to AEC-Q200 and are mechanically and electrically less rugged than C0G or X7R/X8R
ceramic capacitors. In applications that must satisfy high quality requirements, therefore, these
capacitors should not be used as discrete components (see the chapter "Effects on mechanical,
thermal and electrical stress", point 1.4).
4. For ESD protection, preference should be given to the use of multilayer varistors (MLV) (see the
chapter "Effects on mechanical, thermal and electrical stress", point 1.4).
5. An application-specific derating or continuous operating voltage must be considered in order to
cushion (unexpected) additional stresses (see the chapter "Reliability").
The following should be considered in circuit board design
1. If technically feasible in the application, preference should be given to components having an
optimal geometrical design.
2. At least FR4 circuit board material should be used.
3. Geometrically optimal circuit boards should be used, ideally those that cannot be deformed.
4. Ceramic capacitors must always be placed a sufficient minimum distance from the edge of the
circuit board. High bending forces may be exerted there when the panels are separated and dur-
ing further processing of the board (such as when incorporating it into a housing).
5. Ceramic capacitors should always be placed parallel to the possible bending axis of the circuit
board.
6. No screw connections should be used to fix the board or to connect several boards. Compo-
nents should not be placed near screw holes. If screw connections are unavoidable, they must
be cushioned (for instance by rubber pads).
23
10/06
Multilayer ceramic capacitors
Cautions and warnings
The following should be considered in the placement process
1. Ensure correct positioning of the ceramic capacitor on the solder pad.
2. Caution when using casting, injection-molded and molding compounds and cleaning agents,
as these may damage the capacitor.
3. Support the circuit board and reduce the placement forces.
4. A board should not be straightened (manually) if it has been distorted by soldering.
5. Separate panels with a peripheral saw, or better with a milling head (no dicing or breaking).
6. Caution in the subsequent placement of heavy or leaded components (e.g. transformers or
snap-in components): danger of bending and fracture.
7. When testing, transporting, packing or incorporating the board, avoid any deformation of the
board not to damage the components.
8. Avoid the use of excessive force when plugging a connector into a device soldered onto the
board.
9. Ceramic capacitors must be soldered only by the mode (reflow or wave soldering) permissible
for them (see the chapter "Soldering directions").
10. When soldering the most gentle solder profile feasible should be selected (heating time, peak
temperature, cooling time) in order to avoid thermal stresses and damage.
11. Ensure the correct solder meniscus height and solder quantity.
12. Ensure correct dosing of the cement quantity.
13. Ceramic capacitors with an AgPd external termination are not suited for the lead-free solder
process: they were developed only for conductive adhesion technology.
This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.
24
10/06
Multilayer ceramic capacitors
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g.
installation of protective circuitry or redundancy) that no injury or damage is sustained by third
parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as "hazardous"). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the "General Terms of Delivery for Products and Services in the Electrical Industry"
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,
PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
PDF 
ZIP