SMT power inductors
Size 10 x 10 mm
Series/Type: B82464G2
Date:
January
2006
Pages
-5- (incl. title)
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white" (or invisible). This ensures that the table disappears for the customer
PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or
footer when copying the content.
Identification/Classification 1:
(header 1 + top left header bar)
Identification/Classification 2:
(header 2 + bottom left header bar)
Ordering code:
(top right header bar)
3
Series/Type:
(top right header bar)
Preliminary data (optional):
(if necessary)
Department:
Date:
EPCOS AG 2006. Reproduction, publication and dissemination of this document, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
Mit den Angaben im Datenblatt werden die Bauelemente
spezifiziert, nicht Eigenschaften zugesichert.
Liefermglichkeiten und technische nderungen vorbehalten.
1
Size 10x10 mm
Rated inductance 0,82 330
H
Construction
S
Ferrite core
S
Magnetically shielded
S
Winding: enamel copper wire
S
Winding welded to terminals
Features
S
Wide temperature range
S
Very high rated current
S
Low DC resistance
S
Suitable for reflow soldering
Applications
S
Filtering of supply voltages
S
Coupling, decoupling
S
DC/DC converters
S
Automotive electronics
Terminals
S
Tinned
Marking
Marking on component:
Manufacturer, L value (
H, coded), tolerance (coded)
Minimum marking on reel:
Manufacturer, part number, ordering code,
L value and tolerance
quantity, date of packing
Delivery mode
16mm blister tape, reel packing, 1250 pcs. per reel
SMTPowerInductor
B82464G2
DATA SHEET
Hugo ist doof BNR
B82464G2M015976
28.11.2005
Mit den Angaben im Datenblatt werden die Bauelemente
spezifiziert, nicht Eigenschaften zugesichert.
Liefermglichkeiten und technische nderungen vorbehalten.
2
General technical data
Rated inductance L
R
Measured with HP 4294A ,
measuring voltage 100 mV
Rated current I
R
Maximum permissible DC with temperature increase
of
v
40 K at ambient temperature of 85
C
Saturation current I
Sat,typ
Maximum permissible DC with inductance decrease
L/L
0
10%
Climatic category
In accordance with IEC 600681 55/125/56
(55
C/ +125
C/ 56 days damp heat test)
Solderability
5s, 235
C, wetting > 90%
DC resistance R
max
Measured at 20
C ambient temperature
Weight
Approx. 2g
Dimensional drawing and layout recommendation
SMTPowerInductor
B82464G2
DATA SHEET
Hugo ist doof BNR
B82464G2M015976
28.11.2005
Important notes
Page 4
The following applies to all products named in this publication:
1. Some parts of this publication contain
statements about the suitability of our products for
certain areas of application
. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out
that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that
in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified.
In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g. installation
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3.
The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements,
some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as "hazardous")
. Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently,
the products described in this
publication may change from time to time
. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also
reserve the right to discontinue production and delivery of products
. Consequently,
we cannot guarantee that all products named in this publication will always be available.
6.
Unless otherwise agreed in individual contracts,
all orders are subject to the current version of
the "General Terms of Delivery for Products and Services in the Electrical Industry"
published by the German Electrical and Electronics Industry Association
(ZVEI)
.
7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap,
SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are
trademarks registered or
pending
in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
PDF 
ZIP