ChipFind - документация

Электронный компонент: OM-371-A8

Скачать:  PDF   ZIP
Reflective Type Opto Sensor
OM-371-A8
ALEPH INTERNATIONAL CORPORATION
A Member of Nippon Aleph Corporation
Tel: (800) 423-5622
Fax: (818) 365-7274
http://www.aleph-usa.com
info@aleph-usa.com
INSTALLATION HOLE DIMENSIONS (REFERENCE)
Tolerance: 0.1mm
7.8
1.4
PARTS CONSTRUCTION LIST
No.
Description
Qty. Used
Materials
Remarks
1
Case
1
Polycarbonate
Flammability: UL94V-2 or more
2
Inner Case
1
Polycarbonate
Flammability: UL94V-2 or more
3
PCB
1
CEM-3
Flammability: UL94V-0
4
Connector
1
175489-3
AMP (Natural)
5
Light Emitting Diode
1
-
GaAs Infrared Light Emitting Diode
6
Detector
1
-
Phototransistor
No. 1
5.8
Connector 175489-3 (AMP)
15
11
3.2
3.7
15
11.7
11
3.2
11.7
1
Plate Thickness
t = 1 mm
Plate Thickness
t = 1.2 mm
Terminal No.
Symbol
1
Collector
2
Cathode--
Emitter
3
Anode
3.7
Optical Center
4.7
2.3
4.7
Reflective Type Opto Sensor
OM-371-A8
ALEPH INTERNATIONAL CORPORATION
A Member of Nippon Aleph Corporation
Tel: (800) 423-5622
Fax: (818) 365-7274
http://www.aleph-usa.com
info@aleph-usa.com
HANDLING NOTES
1. Careful attention should be made to avoid deformation of components.
2. Environmental air must be free from corrosive gasses such as hydrogen sulfide or salt water air.
3. Mount sensor away from direct sunlight and incandescent light.
4. The side with emitting and receiving elements should be handled very carefully.
5. Insert and remove connectors at room temperature only.
6. Degrading LED radiant power should be addressed if sensor is used repeatedly over a long period of time.
7. This product was designed for use in the following applications:
OA equipment, video equipment, consumer electronics, communication equipment, measuring equip-
ment, and control equipment.
When designing a system for safety and reliability, be sure to incorporate fail-safe and other appropriate
measures.
FOOTNOTES
*1
: Ta > 25 C
*4
:
L = 6 (mm)
OM-371-A8
*2
: ?? 100s; ?? = 100 Hz
*3
: ??
Paper with re-
flection of 90%