EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
12-21USRC/S530-A6/TR8
Device Number
DSE-121-041
REV.
1.0
Chip LEDs with Right Angle Lens
ECN
Page:
1/8
Features
Package in 8mm tape on 7" diameter
reel .
Compatible with automatic place-
ment equipment.
Compatible with infrared and vapor
phase reflow solder process.
Mono-color type.
Description
The 12-21 SMD Taping is much smaller than le-
aded components, thus enable smaller board size,
higher packing density, reduced storage space and
finally smaller equipment to be obtained.
Besides, light Weight makes them ideal for minia-
ture application, etc.
Applications
Automotive: backlighting in dashboard and switch.
Telecommunication: indicator and backlighting in telephone and fax.
Notes
Flat backlight for LCD, switch and symbol.
General use.
CHIP
Material
Emitted Color
12-21USRC/S530-A6/TR8 AlGaInP
Super Red
Water Clear
Office:
TEL:
FAX:
http:
NO. 25, Lane 76, Sec.3, Chung Yang Rd., Tucheng 236, Taipei, Taiwan, R.O.C.
886-2-2267-2000, 2267-9936
886-2-2267-6244, 2267-6189, 2267-6306
//www.everlight.com
Lens Color
PART NO
Package Dimension
Tolerances Unless Dimension
0.1mm
Angle 0.5
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
12-21USRC/S530-A6/TR8
Device Number
DSE-121-041
REV.
1.0
Chip LEDs with Right Angle Lens
ECN
Page:
2/8
Package Dimension
Loaded quantity per reel 2000 pcs/reel
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
12-21USRC/S530-A6/TR8
Device Number
DSE-121-041
REV.
1.0
Chip LEDs with Right Angle Lens
ECN
Page:
3/8
Absolute Maximum Ratings at Ta = 25
Parameter Symbol Rating Unit
Reverse Voltage
Vr
5
V
Forward Current
If
25
mA
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +90
Soldering Temperature
Tsol
260 (for 5 second)
Power Dissipation
Pd
60
mW
Peak Forward
Current(Duty 1/10 @
1KHZ)
If(Peak)
160
mA
Electronic Optical Characteristics :
Parameter
Symbol
Min. Typ. Max. Unit
Condition
Luminous intensity
Iv
65 103 -----
mcd
If=20mA
Viewing Angle
21/2
----- 120 -----
deg
If=20mA
Peak Wavelength
p
----- 639 -----
nm
If=20mA
Dominant
Wavelength
d
----- 631 -----
nm
If=20mA
Spectrum Radiation
Bandwidth
----- 20 -----
nm
If=20mA
Forward Voltage
Vf
----- 2.0 2.4
V
If=20mA
Reverse
Current
Ir
----- ----- 10
A
Vr=5V
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
12-21USRC/S530-A6/TR8
Device Number
DSE-121-041
REV.
1.0
Chip LEDs with Right Angle Lens
ECN
Page:
4/8
Reliability Test Item And Condition
NO
Item
Test Conditions
Test
Hours/Cycle
Sample
Size
Ac/Re
1
Solder Heat
TEMP : 260 5
5 SEC
76 Pcs
0/1
2
Temperature Cycle
H : +85 30min
5 min
L : -55 30min
50 CYCLE
76 Pcs
0/1
3
Thermal Shock
H : +100 5min
10 sec
L : -10 5min
50 CYCLE
76 Pcs
0/1
4
High Temperature Storage
TEMP : 100
1000 HRS
76 Pcs
0/1
5
Low Temperature Storage
TEMP : -55
1000 HRS
76 Pcs
0/1
6
DC Operating Life
If = 20 mA
1000 HRS
76 Pcs
0/1
7
High Temperature /
High Humidity
85/85% RH
1000 HRS
76 Pcs
0/1
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
12-21USRC/S530-A6/TR8
Device Number
DSE-121-041
REV.
1.0
Chip LEDs with Right Angle Lens
ECN
Page:
5/8
Typical Electro-Optical Characteristic Curves
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
12-21USRC/S530-A6/TR8
Device Number
DSE-121-041
REV.
1.0
Chip LEDs with Right Angle Lens
ECN
Page:
6/8
Test Circuit
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause
big current change ( Burn out will happen ).
2. Storage time
2.1 The operation of temperature and R.H. are : 5~35, R.H.60%.
2.2 Once the package is opened , the products should be used within a week.
Otherwise , they should be keep in a dampproof box with desiccants.
Considering the tape life , we suggest our customers to use our products
within a year(from production date).
2.3 If opened more than one week in an atmosphere 5~35, R.H.60%
,
they should be treated at 60 5for 15hrs.
2.4 When you discover that the desiccant in the package has a pink color
(normal=blue) , you should treat them in the same conditions as 2.3.
LED
R
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
12-21USRC/S530-A6/TR8
Device Number
DSE-121-041
REV.
1.0
Chip LEDs with Right Angle Lens
ECN
Page:
7/8
Soldering heat reliability ( DIP )
Please refer to the following figure :
Soldering Iron
Basic spec is 5 sec when 260.If temperature is higher, time should be shorter (+10
-1sec). Power dissipation of iron should be smaller than 15 W , and temperature should
be controllable.Surface temperature of the device should be under 230 .
Rework
1. Customer must finish rework within 5 sec under 260.
2. Copper foil can not be touched by the head of iron.
3. Twin-head type is preferred.
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
12-21USRC/S530-A6/TR8
Device Number
DSE-121-041
REV.
1.0
Chip LEDs with Right Angle Lens
ECN
Page:
8/8
Reflow Temp / Time
preheat
cooling
to rise
PDF 
ZIP