ChipFind - документация

Электронный компонент: LMA441

Скачать:  PDF   ZIP
LMA441
M
EDIUM
P
OWER
PHEMT
MMIC
Phone: (408) 988-1845
http:// www.filss.com
Revised: 06/21/01
Fax: (408) 970-9950
Email: sales@filss.com
FEATURES
24.5 GHz to 27.5 GHz Frequency Band
+22 dBm Output Power at 1dB Compression
21 dB Gain
+5 V Dual Bias Supply
DESCRIPTION AND APPLICATIONS
The LMA441 is a medium power pHEMT amplifier that operates from 24.5 to 27.5 GHz. This 3-
stage amplifier provides 21dB linear power gain with 1dB gain compression power output of greater
than +22 dBm. The LMA441 is designed for Millimeter Wave point to point and point to multi-point
radio link applications. Ground is provided to the circuitry through vias to the backside
metallization.
ELECTRICAL SPECIFICATIONS @ T
Ambient
= 25C
(V
DD
= +5.0V, Z
IN
= Z
OUT
= 50
)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
Frequency Band
F
24.5
27.5
GHz
Power at 1-dB Compression
P-1dB
75% I
DSS
21.5
22
dBm
Small Signal Gain
S
21
75% I
DSS
19.5
21
dB
Small Signal Gain Flatness
S
21
1
2
dB
Input Return Loss
S
11
-8.5
-10
dB
Output Return Loss
S
22
-7.5
-10
dB
Reverse Isolation
S
12
-30
-40
dB
Saturated Drain Current
I
DSS
250
350
450
mA
LMA441
M
EDIUM
P
OWER
PHEMT
MMIC
Phone: (408) 988-1845
http:// www.filss.com
Revised: 06/21/01
Fax: (408) 970-9950
Email: sales@filss.com
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Test Conditions
Min
Max
Units
Drain Voltage
V
D
T
Ambient
= 22
3
C
6
V
Operating Current
I
OP
T
Ambient
= 22
3
C
495
mA
RF Input Power
P
IN
T
Ambient
= 22
3
C
12
dBm
Total Power Dissipation
P
TOT
T
Ambient
= 22
3
C
4
W
Channel Operating Temperature
T
CH
T
Ambient
= 22
3
C
150
C
Storage Temperature
T
STG
--
-65
165
C
Maximum Assembly Temperature
(1 min. max.)
T
MAX
--
300
C
Notes:
Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device.
Recommended Continuous Operating Limits should be observed for reliable device operation.
Power Dissipation defined as: P
TOT
(P
DC
+ P
IN
) P
OUT
, where
P
DC
: DC Bias Power
P
IN
: RF Input Power
P
OUT
: RF Output Power
This GaAs MMIC is susceptible to damage from Electrostatic Discharge. Proper precautions should be used when handling these
devices.
LMA441
M
EDIUM
P
OWER
PHEMT
MMIC
Phone: (408) 988-1845
http:// www.filss.com
Revised: 06/21/01
Fax: (408) 970-9950
Email: sales@filss.com
ASSEMBLY DRAWING
Notes:
Recommended lead bond technique is thermocompression wedge bonding with 0.001" (25m) diameter wire. The
bond tool force shall be 35-38 gram. Bonding stage temperature shall be 230-240C, heated tool (150-160C) is
recommended. Ultrasonic bonding is not recommended.
The recommended die attach is Ablebond silver epoxy, the stabilize bake temperature is set at 150C for 45 minutes.
Bond on bond or stitch bond acceptable.
Conductor over conductor acceptable. Conductors must not short.
LMA441
M
EDIUM
P
OWER
PHEMT
MMIC
Phone: (408) 988-1845
http:// www.filss.com
Revised: 06/21/01
Fax: (408) 970-9950
Email: sales@filss.com
MECHANICAL OUTLINE
Notes:
All units are in microns (m).
All bond pads are 100 X 100 m
2
.
Bias pad (V
DD
) size is 100 X 121.5 m
2
.
Unless otherwise specified.
HANDLING PRECAUTIONS
To avoid damage to the devices care should be exercised during handling. Proper Electrostatic
Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and
testing. These devices should be treated as Class 1A (0-500 V). Further information on ESD control
measures can be found in MIL-STD-1686 and MIL-HDBK-263.
All information and specifications are subject to change without notice.