1
Low Profile Connectors for AC power supply
RP34L Series
Receptacle installed height
Mated dimensions
Mated dimensions
16.9
23.5
9.1
7.8
5
7
1.4
10.45
s
Features
1. Low profile
Receptacles are designed with their installation heights to be
shorter than those of conventional RP34 series.
2. Space saving
Both 2 and 3 position receptacles are miniaturized to 7mm
length, resulting in a small board mounting area.
3. Snap-lock mechanism
Audible click when connector is fully mated.
4. Precise mated connection
Secure hold of the plug on au 3 axis.
5. Sequence mating
The 3 contact type has sequenced mating. One pin makes
contact as a ground terminal before the other contacts.
6. No Mismating
Two polarized keys prevent any insertion error.
7. Ease of Mating
An arrow on the top of the plug shows the proper direction for
insertion.
s
Applications
Notebook PCs, portable remote terminals, AV equipment, etc.
Existing RP34
RP34L-5PA-2SC(
) & RP34L-5R-2PD
This 2 contact plug is an over-molded (i.e., cable-integrated form) type.
Recommended cable diameter is 3.5mm
dia
.
RP34L-5PA-3SC & RP34L-5R-3PD
This 3-contact plug is a field assembly type.
Recommended cable diameter is 4mm dia.
2004.8
RP34L
(2 pos.type)
(3 pos.type)
2
1A DC
100V DC
150V AC/1 minute
10
~
55Hz, one-sided amplitude 0.75mm, 3 directions for 2hours, respectively
-55
for 30 min.
/
normal temp. for 10
~
15 min.
/
+85
for 30 min.
/
normal temp. for 10
~
15 min. 5 cycles
5% salt water solution, 48 hours
5,000 mating / un-mating
s
Product Specifications
s
Material
Ratings
Current rating
Voltage rating
5A
30V AC, 42A DC
Operating temp. range
Storage temp. range
-25
~
+85
-10
~
+60
Item
5.Temperature cycle
6.Salt spray
7.Durability
Specification
30m
or max.
1000m
min.
No flashover or insulation breakdown
No electric disconnection of 10s or more
Insulation resistance:100m
min.
Contact resistance:60m
max.
No corrosions
Conditions
Series name: RP34L
Shell: Shell.size, 5
Type:
Receptacle: R
Assembled straight plug: P
Assembled right angle plug: LP
Cable ass'y, straight plug: PA
Number of contacts:
2, 3
Type of contact:
PD: through hole male contact
SC: crimp female contact
Cable length:(
) depends on
each cable (mm).
1
4
5
6
2
3
1
2
4
3
5
6
s
Ordering information
Component
2 pos.
2 pos.
3 pos.
3 pos.
Metal comp.
Insulator
Contacts
Cover
Insulator
Contacts
Metal comp.
Insulator
Contacts
Insulator
Contacts
Cover
Phosphor bronze
Nylon
Brass
Vinyl chloride
Nylon
Phosphor bronze
Phosphor bronze
PPS
Brass
Polycarbonate
Vinyl chloride
PPS
Phosphor bronze
Solder-plating
Black
Palladium-plating
Black
Black
Solder-plating
Black
Palladium-plating
Black
Black
Black
Palladium-plating
---------------
UL94HB
---------------
UL94V-0
UL94HB
---------------
---------------
UL94V-0
---------------
UL94V-0
UL94V-0
UL94V-0
---------------
Remarks
Finish / Color
Material
1.Contact resistance
2.Insulation resistance
3.Withstanding voltage
4.Vibration
RP34L - 5 PA - 2 SC
(
)
3
s
Receptacles
q
2 pos.
q
3 pos.
RP34L-5R-2PD
RP34L-5R-3PD
PCB mounting pattern
Connector front
Recommended panel cutout
PCB mounting pattern
Connector front
Recommended panel cutout
Part Number
RP34L-5R-2PD
RP34L-5R-3PD
113-5154-6-00
113-5157-4-00
CL No.
4
s
Plugs
s
RP34L-5PA-2SC(1857)
s
RP34L-5P-3SC
s
RP34L-5LP-3SC
Part Number
RP34L-5PA-2SC(1857)
RP34L-5P-3SC
RP34L-5LP-3SC
113-5153-3-00
113-5158-7-00
113-5161-1-00
CL No.
Cable assembly
Field assembly-Straight
Field assembly-Right angle
5
s
Crimp contact
s
Applicable Tools
s
RP34L-SC1-212(01)
Part Number
RP34L-SC1-212(01)
113-5151-8-01
CL No.
TYPE
CL No.
Part Number
Conformant terminal
Applicable conductor
Manual crimping tool
Cable crimping tool
Drawing tool
Crimper
Automatic
Crimper body
--------------
901-0005-4
901-2043-4
150-0074-1
150-0039-0
HT-102/RP34L-SC1-212
CM-105
AP105-RP34L-SC1-212
RP34-TC-01
RP6-SC-TP
RP34L-SC1-212(01)
--------------
RP34L-SC1-212(01)
--------------
--------------
AWG#18
~
#22
--------------
AWG#18
~
#22
4
--------------
6
s
Assembly Instructions(3-Position Plug)
q
Straight Plug
Outer case
Outer case
Outer case
Outer case
q
Right Angle Plug
Insulator body
Insulator body
Outer case
1. Slide the bushing over the cable.
2. Prepare the cable end and the conductors as shown.
3. Crimp the contacts to each conductor.
Verify the crimp dimensions.
4. Insert each of the contacts into the insulator body.
Verify that the contact is secure by slightly pulling
on the conductor. Should the contacts require re-
insertion, use the tool RP6-SC-TP to remove them
(Inserted from the termination side).
5. Crimp the cable clamp over the cable at designated
dimension (Tool number:RP34-TC-01).
6. Place the outer case on a flat surface , with inside facing up.
7. Carefully place the insulator body, clamp and the bushing
into corresponding indents and cut-outs in the outer case.
Verify correct location. (As shown on drawing)
Note A: When placing all components in the case,
exercise caution as NOT to damage any of the
protruding snap.
Note B: All components should fit easily, without use of
any force.
8. Carefully align the other outer case over all
components case. Do not force alignment.
9. Snap the case in place.
1. The right angle plug can also be assembled by
using the same procedure as the straight plug.
7
s
Precautions
1. Use the connector section with its panel held down so as not to have excessive load.For 2-contact type, hold the
outer shellsection of the receptacle, and for 3 contact type, the outer shell section of the plug.
2. After connector assembly, cable must not be pulled over 30N in the arrow-indicated direction. Be careful not to add
excessive tensile load because it will lead the damage of connectors.
Panel
<2-contact type>
<3-contact type>
PDF 
ZIP