A40
FPC Connectors for CardBus PC Cards
IC13 Series
PC Card Standard Compliant
Designed so that screw heads do not
protrude from main body
Card in ejected condition
s
Features
1. Thinner Equipment Designs are Possible
(1) Connections are made to the main board via the FPC
(
*
Note 1)
which permits the PC card slot to be attached directly to the
equipment case. The main board can be located at an
arbitrary position in the thick direction of the PC card slot
which permits thinner equipment designs compared to the
on-board type.
(2) Designed so that the screw
(
*
Note 2)
heads do not protrude
from the main body when fastening to the equipment case.
*
Note 1: In combination with multiple contact, 0.3 mm pitch FPC connectors of
the 80-contact type (FH16 Series)
*
Note 2: When M2 screws are used
2. High Performance Ground
(1) Configured with 10 CardBus grounds for use with FPC
patterns and FPC connectors.
(2) The entire back surface of the FPC is configured with a
ground mesh pattern.
3. High Performance, Dual-End, 2-Point Push Card
Ejection Mechanism
These connectors use a dual-end, 2-point push ejection
mechanism that pushes the edge surface of the PC card
horizontally. This ejection mechanism does not place a
stressful load such as a rotational force on the PC card at the
time of card ejection and thereby achieves a high level of
reliability compared to the 1-point push ejection mechanism.
4. Long card ejection makes card removal easy
(See photograph to the right.)
s
Applications
Notebook computers, PDA, etc.
A41
s
Materials
s
Product Specifications
Part
Card connection portion
For ground clips
Ground plate
Eject metal fitting
Metal fitting
FPC
Insulatior
Contacts
Material
PBT
Brass
Stainless steel
Phosphor bronze
Stainless steel
Stainless steel
Polyamide base
Finish
Black
Contact: Gold plating
----------
Contact: Gold plating
----------
----------
Contact: Solder plating
Remarks
UL94V-0
----------
----------
----------
----------
----------
UL94V-0
Part Number
IC13T-68D-FEJ
*
Weight
14.2g
Item
Specification
Conditions
1. Withstanding voltage
2. Insulation resistance
3. Contact resistance
4. Mating/un-mating
forces
5. Mechanical operation
No flashover or insulation breakdown.
500 M
ohms
min.
40 m
max. (Excluding conductor resistance)
Mating: 39.2N max.
Un-mating: 6.67N to 39.2N
(1) Contact resistance:20 m
ohms
max.from initial value
(2)
No damage, cracks, or parts looseness.
90 V AC/1 minute
100 V DC
1 mA
With corresponding connector
10000 cycles at 400 to 600 cycles per hour
Note 1:Includes temperature rise caused by current flow.
Note 2:The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
Ratings
Operation temperature
Voltage rating
Current rating
-55
to +85
(Note 1)
No. 1 to 68: 30 V AC
No. 17, 18, 51, 52: 0.5 A, Others: 0.1 A
Storage temperature
Operation humidity
-40
to +70
(Note 2)
Relative humidity 95% or less
(No condensation)
A42
s
Ordering Information
s
Corresponding FPC Connector
s
Mounted Condition
Part Number
FH16-80S-0.3SHW
CL No.
586-0613-7
IC13 T - 68 D - FEJ L
1
3
4
6
2
5
Series name: IC13
FPC type: T
Number of contacts: 68
Contact surface of FPC contact portion
D: Upper surface (FPC connector board lower surface mounting)
Eject button type
FEJ: Foldering type
Eject button position
L: Left
R: Right
1
2
3
5
6
4
Note: Please refer to the FH16 Series catalog for specification details.
Case
Case
FPC
Main board
FH16-80S-0.3SHW
Note : Please request a separate diagram for design purposes.
A43
s
Left Button Type
59
6
60.9
3.5 MAX
1.5 MAX
Fitting movement rang
13 MAX
27
17.3
5.9
40
72
12 MAX
9.7 MAX
10 MAX
6.7 MAX
2
2
2
58
6.5
5
34.125
41.625
No.1
No.35
No.34
3.1
2.5
0.5
No.68
2.9
5.6
Note 1: Dimensions of the card mating portion conform to the PC Card Standard.
The indicated dimensions (at the three locations) are symmetrical about the center of the card insertion slot.
4.8
2
85.6 (Card insertion condition)
94.6 (At time of card ejection)
9(Stroke)
10.5(After card ejection)
8
Part Number
IC13T-68D-FEJL
CL No.
640-1201-6
A44
s
Right Button Type
3.5 MAX
1.5 MAX
Fitting movement rang
13 MAX
27
12 MAX
9.7 MAX
10 MAX
6.7 MAX
17.3
40
72
5.9
2
58
6.5
5
34.125
41.625
No.34
No.1
2.5
3.1
0.5
No.35
No.68
2.9
5.6
2
Note 1: Dimensions of the card mating portion conform to the PC Card Standard.
The indicated dimensions (at the three locations) are symmetrical about the center of the card insertion slot.
8
4.8
85.6 (Card insertion condition)
94.6 (At time of card ejection)
9(Stroke)
10.5(After card ejection)
60.9
2
59
2
6
Part Number
IC13T-68D-FEJR
CL No.
640-1202-9
A45
Fixed (screw fastended)portion:4-5.5MAX
Positioning boss:4-2
0
-0.1
FPC side
60.05
580.05
(40)
400.05
(40)
B
B-B
A-A
Case
Tap:M2
Case
Tap:M2
PC card insertion direction
3.5 min
A
10 min
2.6
4MAX
4MAX
2.6
A
*
Note
FG indented area
B
4.80.05
*
Note : The FG can also be dropped via the fitting of the fixed (screw fastened) portion.
Fixed (screw fastended)portion:4-5.5MAX
Positioning boss:4-2
0
-0.1
FPC side
60.05
4.50.05
(40)
400.05
(40)
B-B
A-A
Case
Tap:M2
Case
Tap:M2
PC card insertion direction
3.5 min
B
B
A
A
10 min
2.6
2.6
4MAX
4MAX
*
Note
FG indented area
580.05
*
Note : The FG can also be dropped via the fitting of the fixed (screw fastened) portion.
B
PCB mounting pattern
Left Button Type
Right Button Type
A46
CN
10
44
11
45
12
46
13
GND
47
14
48
15
49
16
50
17
51
P
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
CN
1(GND)
35(GND)
2
36
3
37
4
38
5
39
6
GND
40
7
41
8
42
9
43
GND
P
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
P
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
CN
18
52
19
53
20
54
21
55
22
GND
56
23
57
24
58
25
59
P
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
P79
P80
Mark side
P78
P3
P1
P2
FPC insertion direction
CN2
CN1
CN35
CN36
CN33
CN34
CN68
CN67
B
FPC Connector Land No.
B
Connection Table
CN
GND
26
60
27
61
28
62
29
GND
63
30
64
31
65
32
66
33
67
34(GND)
68(GND)
Note: See the FH16-80S-0.3SHW catalog for the land dimensions.
A47
IC13
FH16
M2
Fixed (screw fastended)portion:4-5.5MAX
Positioning boss:4-2
0
-0.
FPC side
60.05
580.05
4.80.
B
Method of Mounting to the Equipment
Button pulled out
Button pushed in
Portion connected to
the ejection fitting
1. Insert the IC13 FPC portion to the FH16 connector (i.e.,
FPC connector) on an upward angle.
3. Fasten the PC card slot to the case with screws.
(M2 screws are recommended.)
Be careful that a load is not placed upon the FPC and FH16
at this time.
2. Fasten the lock of the FH16 connector (i.e., FPC connector)
and connect the FPC portion.
4. Completion
Note: See the FH16 Series catalog for details about the FPC insertion and
removal methods.
When handling, please hold the portion indicated by the arrow marks with the button pulled out as illustrated in the diagram below. If the portion connected to
the ejection fitting is held with the button pushed in, the fitting might come loose.
PDF 
ZIP