ChipFind - документация

Электронный компонент: HMC454ST89

Скачать:  PDF   ZIP
MICROWAVE CORPORATION
8 - 250
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
General Description
Features
Functional Diagram
The HMC454ST89 is a high dynamic range
GaAs InGaP Heterojunction Bipolar Transistor
(HBT) watt MMIC amplifi er operating between
0.4 and 2.5 GHz. Packaged in a low cost industry
standard SOT89, the amplifi er gain is typically
17.8 dB from 0.8 to 1.0 GHz and 12.5 dB from
1.8 to 2.2 GHz. Utilizing a minimum number of
external components and a single +5V supply,
the amplifi er output IP3 can be optimized to +40
dBm at 0.9 GHz or +42 dBm at 2.0 GHz. The high
output IP3 and PAE makes the HMC454ST89 an
ideal driver amplifi er for Cellular/PCS/3G, WLL,
ISM and Fixed Wireless applications.
Output IP3: +40 to +42 dBm
Gain: 12.5 dB @ 2150 MHz
50% PAE @ +28 dBm Pout
+17.5 dBm W-CDMA Channel Power@ -45 dBc ACP
Single +5V Supply
Industry Standard SOT89 Package
Electrical Specifi cations,
T
A
= +25C, Vs= +5V, (note 1)
Typical Applications
The HMC454ST89 is ideal for applications requiring
a high dynamic range amplifi er:
GSM, GPRS & EDGE
CDMA & W-CDMA
CATV/Cable Modem
Fixed Wireless & WLL
Parameter
Min.
Typ.
Max.
Min.
Typ.
Max.
Min.
Typ.
Max.
Units
Frequency Range
824 - 960
1800 - 2000
2000 - 2200
MHz
Gain
16
17.8
11
12.5
11
12.5
dB
Gain Variation Over Temperature
0.008
0.016
0.008
0.016
0.008
0.016
dB / C
Input Return Loss
9
7
12
dB
Output Return Loss
13
21
19
dB
Output Power for 1dB Compression (P1dB)
22
24.5
24
27
24
27.5
dBm
Saturated Output Power (Psat)
25.5
28.5
28.5
dBm
Output Third Order Intercept (IP3) (note 2)
37
40
38
41
38
42
dBm
Noise Figure
8
6.5
5.2
dB
Supply Current (Icq)
150
150
150
mA
Note 1: Specifi cations and data refl ect HMC454ST89 measured using the respective application circuits for each designated frequency band found
herein. Contact the HMC Applications Group for assistance in optimizing performance for your application.
Note 2: Two-tone input power of 0 dBm per tone, 1 MHz spacing.
MICROWAVE CORPORATION
8 - 251
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
HMC454ST89
Input Return Loss
vs. Temperature @ 900 MHz
Output Return Loss
vs. Temperature @ 900 MHz
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
Broadband Gain
& Return Loss @ 900 MHz
Gain vs. Temperature @ 900 MHz
P1dB vs. Temperature @ 900 MHz
Psat vs. Temperature @ 900 MHz
-20
-15
-10
-5
0
5
10
15
20
25
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
10
11
12
13
14
15
16
17
18
19
20
0.7
0.8
0.9
1
1.1
1.2
+25 C
+85 C
-40 C
GAIN
(dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
0.7
0.8
0.9
1
1.1
1.2
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
0.7
0.8
0.9
1
1.1
1.2
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
20
21
22
23
24
25
26
27
28
29
30
0.7
0.8
0.9
1
1.1
1.2
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
20
21
22
23
24
25
26
27
28
29
30
0.7
0.8
0.9
1
1.1
1.2
+25 C
+85 C
-40 C
PSAT (dBm)
FREQUENCY (GHz)
MICROWAVE CORPORATION
8 - 252
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
Output IP3 vs. Temperature @ 900 MHz
Noise Figure vs. Temperature @ 900 MHz
Gain, Power & IP3
vs. Supply Voltage @ 900 MHz
Reverse Isolation
vs. Temperature @ 900 MHz
34
35
36
37
38
39
40
41
42
43
44
0.7
0.8
0.9
1
1.1
1.2
+25 C
+85 C
-40 C
OIP3 (dBm)
FREQUENCY (GHz)
5
6
7
8
9
10
11
12
13
14
15
0.7
0.8
0.9
1
1.1
1.2
+25 C
+85 C
-40 C
NOI
SE FI
GURE (dB)
FREQUENCY (GHz)
-40
-35
-30
-25
-20
-15
-10
-5
0
0.7
0.8
0.9
1
1.1
1.2
+25 C
+85 C
-40 C
ISOLATION (dB)
FREQUENCY (GHz)
5
10
15
20
25
30
35
40
45
4.5
4.75
5
5.25
5.5
GAIN
P1dB
PSAT
OIP3
GAIN (dB), P1dB (dBm),
PSAT (dBm), OIP3 (dBm)
Vs (Vdc)
5.5V
5.0V
4.5V
-80
-75
-70
-65
-60
-55
-50
-45
-40
-35
-30
7
8
9
10
11
12
13
14
15
16
17
18
19
ACPR (dBc)
Channel Output Power (dBm)
CDMA IS95
Frequency : 880 MHz
Integration BW: 1.228 MHz
Forward Link, 9 Channels
Source ACPR
ACPR vs. Supply Voltage @ 880 MHz
CDMA IS95, 9 Channels Forward
MICROWAVE CORPORATION
8 - 253
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
Input Return Loss
vs. Temperature @ 1960 MHz
Output Return Loss
vs. Temperature @ 1960 MHz
Broadband Gain
& Return Loss @ 1960 MHz
Gain vs. Temperature @ 1960 MHz
P1dB vs. Temperature @ 1960 MHz
Psat vs. Temperature @ 1960 MHz
-25
-20
-15
-10
-5
0
5
10
15
20
25
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
5
6
7
8
9
10
11
12
13
14
15
1.7
1.8
1.9
2
2.1
2.2
+25 C
+85 C
-40 C
GAIN
(dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
1.7
1.8
1.9
2
2.1
2.2
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
1.7
1.8
1.9
2
2.1
2.2
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
22
23
24
25
26
27
28
29
30
31
32
1.7
1.8
1.9
2
2.1
2.2
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
22
23
24
25
26
27
28
29
30
31
32
1.7
1.8
1.9
2
2.1
2.2
+25 C
+85 C
-40 C
PSAT (dBm)
FREQUENCY (GHz)
MICROWAVE CORPORATION
8 - 254
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
Output IP3 vs. Temperature @ 1960 MHz
Noise Figure
vs. Temperature @ 1960 MHz
Gain, Power & IP3
vs. Supply Voltage @ 1960 MHz
Reverse Isolation
vs. Temperature @ 1960 MHz
34
35
36
37
38
39
40
41
42
43
44
1.7
1.8
1.9
2
2.1
2.2
+25 C
+85 C
-40 C
OIP3 (dBm)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10
1.7
1.8
1.9
2
2.1
2.2
+25 C
+85 C
-40 C
NOI
SE FI
GURE (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
1.7
1.8
1.9
2
2.1
2.2
+25 C
+85 C
-40 C
ISOLATION (dB)
FREQUENCY (GHz)
5
10
15
20
25
30
35
40
45
4.5
4.75
5
5.25
5.5
GAIN
P1dB
PSAT
OIP3
GAIN (dB), P1dB (dBm),
PSAT (dBm), OIP3 (dBm)
Vs (Vdc)
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
MICROWAVE CORPORATION
8 - 255
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
ACPR vs. Supply Voltage @ 1.96 GHz
CDMA 2000, 9 Channels Forward
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
ACPR vs. Supply Voltage @ 2.14 GHz
W-CDMA, 64 DPCH
4.5V
-70
-65
-60
-55
-50
-45
-40
-35
-30
0
2
4
6
8
10
12
14
16
18
20
ACPR (dBc)
Channel Output Power (dBm)
WCDMA
Frequency : 2.14 GHz
Integration BW: 3.84 MHz
64 DPCH
5.5V
Source ACPR
5.0V
5.5V
5.0V
4.5V
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
2
4
6
8
10
12
14
16
18
20
22
ACPR (dBc)
Channel Output Power (dBm)
CDMA2000 Rev. 8
Frequency : 1.96 GHz
Integration BW: 1.228 MHz
Forward Link, SRI, 9 CHANNELS
Source ACPR
MICROWAVE CORPORATION
8 - 256
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
Outline Drawing
Absolute Maximum Ratings
Collector Bias Voltage (Vcc)
+6.0 Vdc
RF Input Power (RFin)(Vs = +5.0 Vdc)
+20 dBm
Junction Temperature
150 C
Continuous Pdiss (T = 85 C)
(derate 13.6 mW/C above 85 C)
0.890 W
Thermal Resistance
(junction to ground paddle)
73 C/W
Storage Temperature
-65 to +150 C
Operating Temperature
-40 to +85 C
NOTES:
1. PACKAGE BODY MATERIAL: MOLDING COMPOUND MP-180S
OR
EQUIVALENT.
2. LEAD MATERIAL: Cu w/Ag SPOT PLATING.
3. LEAD PLATING: 80Sn/20Pb
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
MICROWAVE CORPORATION
8 - 257
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1
RFIN
This pin is AC coupled.
Off chip matching components are required.
See Application Circuit herein.
3
RFOUT
RF output and DC Bias input for the output amplifi er stage.
Off chip matching components are required.
See Application Circuit herein.
2,4
GND
These pins & package bottom must be connected to
RF/DC ground.
MICROWAVE CORPORATION
8 - 258
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
900 MHz Application Circuit, Compact Layout
Recommended Component Values
L1, L2
1 nH
L3
36 nH
R1
5.1 Ohms
C1
8 pF
C2
22 pF
C3
2.7 pF
C4, C6
100 pF
C5
2.2 F
TL1
Impedance
50 Ohm
Physical Length
0.050"
Electrical Length
2.5
PCB Material: 10 mil Rogers 4350,
Er = 3.48
This circuit was used to specify the performance for 894-960 MHz operation. This circuit will satisfy many
applications from 700 to 1200 MHz. Contact the HMC Applications Group for assistance in optimizing
performance for your application.
MICROWAVE CORPORATION
8 - 259
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
900 MHz Evaluation PCB
The circuit board used in this application should use RF
circuit design techniques. Signal lines should have 50
ohm impedance while the package ground leads and
exposed paddle should be connected directly to the
ground plane similar to that shown. A suffi cient number
of VIA holes should be used to connect the top and
bottom ground planes. The evaluation board should be
mounted to an appropriate heat sink. The evaluation cir-
cuit board shown is available from Hittite upon request.
List of Materials for Evaluation PCB 107755*
Item
Description
J1 - J2
PC Mount SMA Connector
J3 -J4
DC Pins
C1
8 pF Capacitor, 0402 Pkg.
C2
22 pF Capacitor, 0402 Pkg.
C3
2.7 pF Capacitor, 0402 Pkg.
C4, C6
100 pF Capacitor, 0402 Pkg.
C5
2.2 F Capacitor, Tantalum
L1, L2
1 nH Inductor, 0402 Pkg.
L3
36 nH Inductor, 0402 Pkg.
R1
5.1 Ohms
U1
HMC454ST89 Linear Amp
PCB**
107753 Evaluation PCB, 10 mils
** Circuit Board Material: Rogers 4350, Er = 3.48
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
* Reference this number when ordering complete evaluation PCB.
MICROWAVE CORPORATION
8 - 260
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
1960 & 2140 MHz Application Circuit
Recommended Component Values
L1
8.2 nH
C1
1 pF
C2
1.2 pF
C3
3 pF
C4
100 pF
C5
2.2 F
TL1
TL2
TL3
Impedance
50 Ohm
50 Ohm
50 Ohm
Physical Length
0.32"
0.10"
0.17"
Electrical Length
34
11
18.5
PCB Material: 10 mil Rogers 4350, Er = 3.48
This circuit was used to specify the performance for 1800-2000 and 2000-2200 MHz operation. This circuit
will satisfy many applications from 1700 to 2500 MHz. Contact the HMC Applications Group for assistance
in optimizing performance for your application.
MICROWAVE CORPORATION
8 - 261
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
1960 & 2140 MHz Evaluation PCB
The circuit board used in this application should use RF
circuit design techniques. Signal lines should have 50
ohm impedance while the package ground leads and
exposed paddle should be connected directly to the
ground plane similar to that shown. A suffi cient number
of VIA holes should be used to connect the top and
bottom ground planes. The evaluation board should be
mounted to an appropriate heat sink. The evaluation cir-
cuit board shown is available from Hittite upon request.
List of Materials for Evaluation PCB 107749*
Item
Description
J1 - J2
PC Mount SMA Connector
J3 - J4
DC Pins
C1
1.0 pF Capacitor, 0402 Pkg.
C2
1.2 pF Capacitor, 0402 Pkg.
C3
3.0 pF Capacitor, 0402 Pkg.
C4
100 pF Capacitor, 0402 Pkg.
C5
2.2 F Capacitor, Tantalum
L1
8.2 nH Inductor, 0402 Pkg.
U1
HMC454ST89
PCB**
107747 Evaluation PCB, 10 mils
** Circuit Board Material: Rogers 4350, Er = 3.48
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
* Reference this number when ordering complete evaluation PCB.
MICROWAVE CORPORATION
8 - 262
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
Recommended Component Values
L1
18 nH
C1
4 pF
C2, C6
10 pF
C3
3 pF
C4
100 pF
C5
2.2 F
TL1
TL2
TL3
Impedance
50 Ohm
50 Ohm
50 Ohm
Physical Length
0.35"
0.05"
0.53"
Electrical Length
18
2.5
27
PCB Material: 10 mil Rogers 4350, Er = 3.48
Broadband Gain & Return Loss
-15
-10
-5
0
5
10
15
20
25
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
20
25
30
35
40
45
50
0.7
0.8
0.9
1
1.1
1.2
OIP3
OP1dB
OUTPUT IP3 (dBm), OU
TPUT P1dB (dBm)
FREQUENCY (GHz)
Output IP3 & P1dB
Alternative 900 MHz Application Circuit, Optimal OIP3 Layout
This alternate application circuit for 900 MHz applications features a resonating I/O structure on the PCB
that, while using more PCB area, will improve output IP3 from +40 dBm to +42 dBm. This circuit will satisfy
many applications from 700 to 1200 MHz as the typical performance below demonstrates. Contact the
HMC Applications Group for assistance in optimizing performance for your application.
MICROWAVE CORPORATION
8 - 263
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
AMPLIFIERS - SMT
8
HMC454ST89
InGaP HBT WATT HIGH IP3
AMPLIFIER, 0.4 - 2.5 GHz

v02.0404
Alternate 900 MHz Evaluation PCB
The circuit board used in this application should use RF
circuit design techniques. Signal lines should have 50
ohm impedance while the package ground leads and
exposed paddle should be connected directly to the
ground plane similar to that shown. A suffi cient number
of VIA holes should be used to connect the top and
bottom ground planes. The evaluation board should be
mounted to an appropriate heat sink. The evaluation cir-
cuit board shown is available from Hittite upon request.
List of Materials
Item
Description
J1 - J2
PC Mount SMA Connector
J3 - J4
DC Pins
C1
4 pF Capacitor, 0402 Pkg.
C2, C6
10 pF Capacitor, 0402 Pkg.
C3
3.0 pF Capacitor, 0402 Pkg.
C4
100 pF Capacitor, 0402 Pkg
L1
18 nH Inductor, 0402 Pkg.
U1
HMC454ST89
PCB*
107750 Evaluation PCB, 10 mils
* Circuit Board Material: Rogers 4350, Er = 3.48