ChipFind - документация

Электронный компонент: 82801BA

Скачать:  PDF   ZIP

Document Outline

Intel
82801BA I/O Controller
Hub 2 (ICH2) and Intel
82801BAM
I/O Controller Hub 2 Mobile
(ICH2-M)
Datasheet
October 2000
Order Number:
290687-002
82801BA ICH2 and 82801BAM ICH2-M
Datasheet
Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not
intended for use in medical, life saving, or life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
The Intel 82801BA I/O Controller Hub 2 (ICH2) and Intel 82801BAM I/O Controller Hub 2 (ICH2-M) may contain design defects or errors known as
errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.
I
2
C is a two-wire communications bus/protocol developed by Philips. SMBus is a subset of the I
2
C bus/protocol and was developed by Intel.
Implementations of the I
2
C bus/protocol or the SMBus bus/protocol may require licenses from various entities, including Philips Electronics N.V. and
North American Philips Corporation.
Alert on LAN and Wake on LAN are results of the IBM/Intel Advanced Manageability Alliance and are trademarks of IBM Corporation.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature may be obtained by:
calling 1-800-548-4725 or
by visiting Intel's website at http://www.intel.com.
Copyright Intel Corporation, 2000
*Third-party brands and names are the property of their respective owners.
82801BA ICH2 and 82801BAM ICH2-M
Datasheet
iii
Intel
82801BA/M ICH2/ICH2-M Features
I
PCI Bus I/F
-- Supports PCI at 33 MHz
-- Supports PCI Rev 2.2 Specification
-- 133 MByte/sec maximum throughput
-- Supports up to 6 master devices on PCI
-- One PCI REQ/GNT pair can be given higher
arbitration priority (intended for external
1394 host controller)
I
Integrated LAN Controller
-- WfM 2.0 Compliant
-- Interface to discrete LAN Connect
component
-- 10/100 Mbit/sec Ethernet support
-- 1 Mbit/sec HomePNA* support
I
Integrated IDE Controller
-- Independent timing of up to 4 drives
-- Ultra ATA/100/66/33, BMIDE and PIO
modes
-- Read transfers up to 100MB/s, Writes to
89 MB/s
-- Separate IDE connections for Primary and
Secondary cables
-- Implements Write Ping-Pong Buffer for
faster write performance
I
USB
-- 2 UHCI Host Controllers with a total of
4 ports
-- USB 1.1 compliant
-- Supports wake-up from sleeping states
S1S4
-- Supports legacy Keyboard/Mouse software
I
AC'97 Link for Audio and Telephony CODECs
-- AC'97 2.1 compliant
-- Independent bus master logic for 5 channels
(PCM In/Out, Mic Input, Modem In/Out)
-- Separate independent PCI functions for
Audio and Modem
-- Support for up to six channels of PCM audio
output (full AC3 decode)
-- Supports wake-up events
I
Interrupt Controller
-- Support up to 8 PCI interrupt pins
-- Supports PCI 2.2 Message-Based Interrupts
-- Two cascaded 82C59
-- Integrated I/O APIC capability
-- 15 interrupts supported in 8259 mode, 24
supported in I/O APIC mode
-- Supports Serial Interrupt Protocol
-- Supports Front-Side Bus interrupt delivery
I
1.8 V operation with 3.3 V I/O
-- 5V tolerant buffers on IDE, PCI, USB Over-
current and Legacy signals
I
GPIO
-- TTL, Open-Drain, Inversion
I
Timers Based on 82C54
-- System timer, Refresh request, Speaker tone
output
I
Power Management Logic
-- ACPI 1.0 compliant
-- ACPI Power Management Timer
-- PCI PME# support
-- SMI# generation
-- All registers readable/restorable for proper
resume from 0V suspend states
-- Support for APM-based legacy power
management for non-ACPI implementations
I
External Glue Integration
-- Integrated Pull-up, Pull-down and Series
Termination resistors on IDE and processor
interface
I
Enhanced Hub I/F buffers improve routing
flexibility (Not available with all Memory
Controller Hubs)
I
Firmware Hub (FWH) I/F supports BIOS
memory size up to 8 MBs
I
Low Pin count (LPC) I/F
-- Allows connection of legacy ISA and X-Bus
devices such as Super I/O
-- Supports two Master/DMA devices.
I
Enhanced DMA Controller
-- Two cascaded 8237 DMA controllers
-- PCI DMA: Supports PC/PCI -- Includes
two PC/PCI REQ#/GNT# pairs
-- Supports LPC DMA
-- Supports DMA Collection Buffer to provide
Type-F DMA performance for all DMA
channels
I
Real-Time Clock
-- 256-byte battery-backed CMOS RAM
-- Hardware implementation to indicate century
rollover
I
System TCO Reduction Circuits
-- Timers to generate SMI# and Reset upon
detection of system hang
-- Timers to detect improper processor reset
-- Integrated processor frequency strap logic
I
SM Bus
-- Host interface allows processor to
communicate via SM Bus
-- Slave interface allows an external
Microcontroller to access system resources
-- Compatible with most 2-Wire components
that are also I
2
C compatible
I
Supports ISA bus via external PCI-ISA Bridge
I
360-pin EBGA package
-- Tri-state modes to enable mobile swap bay
(82801BAM ICH2-M)
-- ACPI-defined power states
- C1C2, S3S5 (82801BA ICH2)
- C1C3, S1, S3S5 (82801BAM ICH2-M)
-- Support for "Intel
SpeedStepTM
technology" processor power control
(82801BAM ICH2-M)
-- PCI CLKRUN# support
(82801BAM ICH2-M)
The Intel
82801BA ICH2 and 82801BAM ICH2-M may contain design defects or errors known as errata which may cause the
products to deviate from published specifications. Current characterized errata are available on request.
Shading,as is shown here, indicates differences between the two components.
iv
82801BA ICH2 and 82801BAM ICH2-M
Datasheet
Intel
82801BA (ICH2) and 82801BAM (ICH2-M) Simplified Block Diagram
INTRUDER#
SMLINK[1:0]
HL11:0]
HL_STB
HL_STB#
HLCOMP
THRM#
SLP_S3
SLP_S5#
PWROK
PWRBTN#
RI#
RSMRST#
SUS_STAT#
/LPCPD#
SUSCLK
RSM_PWROK (ICH2) or LAN_PWROK (ICH2-M)
VRMPWRGD
AD[31:0]
C/BE[3:0]#
DEVSEL#
FRAME#
IRDY#
TRDY#
STOP#
PAR
PERR#
REQ[0:4]#
REQ5#/REQB#
/GPIO1
REQA#/
GPIO0
GNT[0:4]#
GNT5#/GNTB#
/GPIO17
GNTA#/
GPIO16
PCICLK
PCIRST#
PLOCK#
SERR#
PME#
Interrupt
blk_ich2-ich2m
A20M#
CPUSLP#
FERR#
IGNNE#
INIT#
INTR
NMI
SMI#
STPCLK#
RCIN#
A20GATE
CPUPWRGD
Processor
Interface
PCI
Interface
USB
SERIRQ
PIRQ[A:D]#
PIRQ[H:E]/
GPIO[5:2]
IRQ[14:15]
APICCLK
APICD[1:0]
USBP1P
USBP1N
USBP0P
USBP0N
OC[3:0]#
RTCX1
RTCX2
CLK14
CLK48
CLK66
RTC
Clocks
Misc.
Signals
SPKR
RTCRST#
(ICH2) TP0
FS0
PDCS1#
SDCS1#
PDCS3#
SDCS3#
PDA[2:0]
SDA[2:0]
PDD[15:0]
SDD[15:0]
PDDREQ
SDDREQ
PDDACK#
SDDACK#
PDIOR#
SDIOR#
PDIOW#
SDIOW#
PIORDY
SIORDY
IDE
Interface
Hub
Interface
LPC
Interface
SMBus
Interface
Power
Mgnt.
AC_RST#
AC_SYNC
AC_BIT_CLK
AC_SDOUT
AC_SDIN0
AC_SDIN1
AC'97
Link
Firmware
Hub
System
Mgnt.
General
Purpose
I/O
FWH[3:0]
/LAD[3:0]
FWH[4]
/LFRAME#
LAD[3:0]
/FWH[4]
LFRAME#
/FWH[4]
LDRQ[0:1]#
SMBDATA
SMBCLK
SMBALERT#
/GPIO[11]
LAN_CLK
LAN_RXD[2:0]
LAN_TXD[2:0]
LAN_RSTSYNC
System
Mgnt.
System
Mgnt.
EE_SHCLK
EE_DIN
EE_DOUT
EE_CS
(ICH2-M)CLKRUN#
/ VGATE (ICH2-M)
SLP_S1# (ICH2-M)
C3_STAT#/GPIO[21] (ICH2-M)
AGPBUSY# (ICH2-M)
STP_PCI# (ICH2-M)
STP_CPU# (ICH2-M)
BATLOW# (ICH2-M)
CPUPERF# (ICH2-M)
SSMUXSEL (ICH2-M)
Note:
1. The GPIO signals listed above represent the GPIO signals for the 82801BA ICH2. Some of
these signals are not implemented in the 82801BAM ICH2-M. See Signal Description Chapter for details.
GPIO[13:11,8:6,4:3,1:0]
GPIO[23:16]
GPIO[28:24]
82801BA ICH2 and 82801BAM ICH2-M
Datasheet
v
System Configuration
M ain
M emory
Processor
PCI Bus
PCI Slots
Host
Controller
I/O Controller Hub 2
82801BA (ICH2)
and
82801BAM (ICH2-M )
FW H
4xUSB
GPIO
ISA Bridge
(optional)
Super I/O
(required)
LPC I/F
Graphics
Controller
SM Bus
Device(s)
SM Bus
AC'97 Codec(s)
(optional)
AC'97 2.1
ATA/100/66/33
4 IDE Drives
Hub Interface
PCI Agent
LAN
Controller
M oon2
Docking Bridge
(optional) (ICH2-M )