ChipFind - документация

Электронный компонент: 83C196KB16

Скачать:  PDF   ZIP
8XC196KB/8XC196KB16
PROCESS INFORMATION
This device is manufactured on P629. 0 and 629.1, a
CHMOS III-E process. Additional process and reli-
ability information is available in the
Intel Quality
System Handbook:
http://developer.intel.com/design/quality/quality.htm
2709092
NOTE:
1. EPROMs are available as One Time Programmable
(OTPROM) only.
Figure 2. The 8XC196KB Nomenclature
Table 1. Thermal Characteristics
Package
ja
jc
Type
PLCC
35
C/W
13
C/W
QFP
70
C/W
4
C/W
All thermal impedance data is approximate for static air
conditions at 1W of power dissipation. Values will change
depending on operation conditions and application. See
the Intel
Packaging Handbook (order number 240800) for a
description of Intel's thermal impedance test methodology.
Table 2. 8XC196KB Memory Map
Description
Address
External Memory or I/O
04000H
Internal ROM/EPROM or External
Memory (Determined by EA)
2080H
Reserved. Must contain FFH.
(Note 5)
2040H
Upper Interrupt Vectors
203FH
2030H
ROM/EPROM Security Key
202FH
2020H
Reserved. Must contain FFH.
(Note 5)
201AH
Reserved. Must Contain 20H.
(Note 5)
CCB
2018H
Reserved. Must contain FFH.
(Note 5)
2014H
Lower Interrupt Vectors
2013H
2000H
Port 3 and Port 4
1FFFH
1FFEH
External Memory
1FFDH
0100H
232 Bytes Register RAM (Note 1)
00FFH
0018H
CPU SFR's (Notes 1, 3)
0017H
0000H
NOTES:
1. Code executed in locations 0000H to 00FFH will be
forced external.
2. Reserved memory locations must contain 0FFH unless
noted.
3. Reserved SFR bit locations must contain 0.
4. Refer to 8XC196KB quick reference for SFR descrip-
tions.
5. WARNING: Reserved memory locations must not be
written or read. The contents and/or function of these lo-
cations may change with future revisions of the device.
Therefore, a program that relies on one or more of these
locations may not function properly.
3
207FH
201FH
2019H
2017H
0FFFFH
3FFFH
8XC196KB/8XC196KB16
2709093
Figure 3. 68-Pin Package (PLCC Top View)
NOTE:
The above pin out diagram applies to the OTP (87C196KB) device. The OTP device uses all of the programming pins shown
above. The ROM (83C196KB) device only uses programming pins: AINC, PALE, PMODE.n, and PROG. The ROMless
(80C196KB) doesn't use any of the programming pins.
4
8XC196KB/8XC196KB16
2709094
NOTE
:
N.C. means No Connect (do not connect these pins).
Figure 4. 80-Pin QFP Package
NOTE
:
The above pin out diagram applies to the OTP (87C196KB) device. The OTP device uses all of the programming pins shown
above. The ROM (83C196KB) device only uses programming pins: AINC, PALE, PMODE.n, and PROG. The ROMless
(80C196KB) doesn't use any of the programming pins.
5