ChipFind - документация

Электронный компонент: 7301MABE

Скачать:  PDF   ZIP
F-3
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
F
Toggle
Features/Benefits
Multi-pole and multi-position
Wide variety of actuator and
termination options
Epoxy sealed terminals prevent
contamination during soldering
Typical Applications
Telecommunications
Instrumentation
Medical equipment
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page F-16 for additional ratings.
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
CONTACT RESISTANCE: Below 10 m
typ. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109
min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: 30C to 85C.
SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E
method 9 (1 hour steam aging).
For materials see page F-4.
NOTE: Specifications listed above are for switches with standard options. For information
on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F-4 thru F-16. For additional options not shown in catalog, consult our Customer Service Center.
Switch Function
7101
(STD.) SP On-None-On
7103
(STD.) SP On-Off-On
7105
SP Mom.-Off-Mom.
7107
SP On-Off-Mom.
7108
SP On-None-Mom.
7109
SP None-On-Mom.
7201
(STD.) DP On-None-On
7203
(STD.) DP On-Off-On
7205
DP Mom.-Off-Mom.
7207
DP On-Off-Mom.
7208
DP On-None-Mom.
7211
(STD.) DP On-On-On
7213
DP On-On-Mom.
7215
DP Mom.-On-Mom.
7301
(STD.) 3P On-None-On
7303
3P On-Off-On
7305
3P Mom.-Off-Mom.
7307
3P On-Off-Mom.
7308
3P On-None-Mom.
7401
(STD.) 4P On-None-On
7403
4P On-Off-On
7405
4P Mom.-Off-Mom.
7407
4P On-Off-Mom.
7408
4P On-None-Mom.
7411
4P On-On-On
7413
4P On-On-Mom.
7415
4P Mom.-On-Mom.
Note: UL/CSA models available,
see pages F-4 & F-5.
Actuator
M
(STD.) .200" high
P3
(STD.) Flatted, anti-rotation,
.450" high
S
(STD.) .420" high
T
(STD.) .687" high, 15/32 bushing
K2
Locking lever, .704" high
K9
Locking lever, .704" high
K12
Locking lever, .732" high
K19
Locking lever, .732" high
L
.840" high
L1
.640" high
L1P
Anti-rotation, .640" high
L2
.550" high
L2P
Anti-rotation, .550" high
L3
Plastic, .840" high
L3P
Plastic, anti-rotation,
.840" high
L40
Lever handle without cap
L41
.531" high lever handle with cap
L42
.838" high lever handle with cap
MP
Anti-rotation, .200" high
P1
Flatted, anti-rotation,
.840" high
P4
Flatted, anti-rotation,
.250" high
SP
Anti-rotation, .420" high
T1
.487" high, 15/32 bushing
T1P
Anti-rotation, .487" high,
15/32 bushing
T2P
Flatted, anti-rotation,
.610" high, 15/32 bushing,
TP
Anti-rotation, .687" high,
15/32 bushing
Terminations
A
(STD.) Right angle, PC thru-hole
AV2
(STD.) Vert. right angle, PC thru-hole
C
(STD.) PC Thru-hole
V3
(STD.) .460 high, V-bracket
Z
(STD.) Solder lug
A2
Right angle, PC thru-hole
A3
Right angle, PC thru-hole
A4
Right angle, PC thru-hole
AV3
Vert. right angle, PC thru-hole
AW1
Right angle, extended, PC thru-hole
AW3
Right angle, extended, PC thru-hole
AW4
Right angle, extended, PC thru-hole
V2
.555" high, V-bracket
V4
.630" high, V-bracket
V6
.460" high, V-bracket
V7
.630" high, V-bracket
V8
.953" high, V-bracket
V9
1.150" high, V-bracket
V21
.555" high, snap-in V-bracket
V31
.460" high, snap-in V-bracket
V41
.630" high, snap-in V-bracket
Bushing
D
(STD.) .280 high, keyway
H
(STD.) .296 high, flat
Y
(STD.).350 high, keyway
NONE
No bushing
choice required
CW
Splashproof
D8
.280" high, flat
D9
.280" high, keyway
H3
.315" high, keyway
H4
8mm high, keyway
Y1
.378" high, keyway
Y3
8.9mm high, keyway
Y4
.378" high, flat
Y9
.350" high, keyway
Contact Material
B
(STD.) Gold
Q
(STD.) Silver
K
Gold, tin-lead
M
Silver, tin-lead
G
Gold over silver
L
Gold over silver, tin-lead
Seal
E
(STD.) Epoxy
I
Epoxy potted
base
Actuator Color/Finish
NONE
(STD.) Bright chrome
0
(STD) Actuator finish
with black bushing
1
White
2
Black
3
Red
S
Satin chrome
KXX Actuator Color/Finish
NONE
(STD.) Natural aluminum
0
(STD) Natural aluminum
with black bushing
2
Black anodized aluminum
3
Red anodized aluminum
7
Blue anodized aluminum
Bushing Finish
NONE
(STD.) Nickel on all
bushings (except D8,
satin chrome)
2
Black
V61
.460" high, snap-in V-bracket
V71
.630" high, snap-in V-bracket
V81
.953" high, snap-in V-bracket
W
.750" long, wire wrap
W1
.964" long, wire wrap
W3
.425" long, wire wrap
W4
1.062" long, wire wrap
W5
1.305" long, wire wrap
Z3
Quick connect
Models Available
F-4
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
Third Angle
Projection
F
Toggle
1/4-40 UNS-2A
KEYWAY
DPDT
2-1,5-4
2-1,5-4
2-1,5-4
2-1,5-4
N/A
OPEN
N/A
2-3,5-4
2-3,5-6
2-3,5-6
2-3,5-6
2-3,5-6
ON
NONE
ON
ON
OFF
ON
MOM.
OFF
MOM.
ON
OFF
MOM.
ON
NONE
MOM.
ON
ON
ON
ON
ON
MOM.
MOM.
ON
MOM.
U21
U23
U25
U27
U28
U211
*
U213
*
U215
*
7201
(STD.)
7203
(STD.)
7205
7207
7208
7211
(STD.)
*
7213
*
7215
*
DP
1/4-40 UNS-2A
KEYWAY
SPDT
2-1
2-1
2-1
2-1
N/A
OPEN
N/A
2-3
2-3
2-3
2-3
N/A
ON
NONE
ON
ON
OFF
ON
MOM.
OFF
MOM.
ON
OFF
MOM.
ON
NONE
MOM.
NONE
ON
MOM.
U11
U13
U15
U17
U18
U19
7101
(STD.)
7103
(STD.)
7105
7107
7108
7109
SP
SCHEMATIC
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
SWITCH FUNCTION
POS. 1
POS. 2
POS. 3
UL/CSA**
MODEL
NO.
MODEL NO.
NO.
POLES
Terminal Numbers
For Reference Only
Terminal Numbers
For Reference Only
DPDT
SPDT
Part number shown: 7101SYZBE
Part number shown: 7201SYZQE
MOM. = Momentary
* Wiring for 3-way switch, see Section N.
** U11U415 model nos.
with all options when ordered with G, L, M or Q contact material.
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Brass, chrome plated.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See page F-16 for additional contact materials.
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See above for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated.
NOTE: Materials listed above are for switches with standard options. For information
on specific and custom switches, consult Customer Service Center.
SWITCH FUNCTION
F-5
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
SWITCH FUNCTION
Third Angle
Projection
F
Toggle
1/4-40 UNS-2A
KEYWAY
4PDT
2-1,5-4,8-7,11-10
2-1,5-4,8-7,11-10
2-1,5-4,8-7,11-10
2-1,5-4,8-7,11-10
N/A
OPEN
N/A
2-3,5-4,8-9,11-10
2-3,5-6,8-9,11-12
2-3,5-6,8-9,11-12
2-3,5-6,8-9,11-12
2-3,5-6,8-9,11-12
ON
NONE
ON
ON
OFF
ON
MOM.
OFF
MOM.
ON
OFF
MOM.
ON
NONE
MOM.
ON
ON
ON
ON
ON
MOM.
MOM.
ON
MOM.
U41
U43
U45
U47
U48
U411
*
U413
*
U415
*
7401
(STD.)
7403
7405
7407
7408
7411
*
7413
*
7415
*
4P
1/4-40 UNS-2A
KEYWAY
3PDT
2-1,5-4,8-7
2-1,5-4,8-7
2-1,5-4,8-7
N/A
OPEN
N/A
2-3,5-6,8-9
2-3,5-6,8-9
2-3,5-6,8-9
ON
NONE
ON
ON
OFF
ON
MOM.
OFF
MOM.
ON
OFF
MOM.
ON
NONE
MOM.
U31
U33
U35
U37
U38
7301
(STD.)
7303
7305
7307
7308
3P
SCHEMATIC
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
SWITCH FUNCTION
POS. 1
POS. 2
POS. 3
UL/CSA**
MODEL
NO.
MODEL NO.
NO.
POLES
Terminal Numbers
For Reference Only
Terminal Numbers
For Reference Only
4PDT
3PDT
Part number shown: 7301SYZQE
Part number shown: 7401SYZQE
MOM. = Momentary
* Wiring for 3-way switch, see Section N.
** U11U415 model nos.
with all options when ordered with G, L, M or Q contact material.
F-6
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
ACTUATOR
Third Angle
Projection
F
Toggle
*
DIM. `A'
*
*
*
*
*
15/32-32 UNS-2A
15/32-32 UNS-2A
15/32-32 UNS-2A
SP
ANTIROTATION, .420" HIGH
2,3
S
(STD.) .420" HIGH
1
MP
ANTIROTATION, .200" HIGH
2,3
M
(STD.) .200" HIGH
1
L1P, L2P
ANTIROTATION,
.840", .640", .550" HIGH
2,3
L, L1, L2
.840", .640", .550" HIGH
1
TP
ANTIROTATION, .687" HIGH,
15/32 BUSHING
1,2,3
T
(STD.) .687" HIGH
1,2
T1P
ANTIROTATION, .487" HIGH,
15/32 BUSHING
1,2,3
T1
.487" HIGH
1,2
P1
FLATTED WITH ANTIROTATION, .840" HIGH
2,3
P3
(STD.) FLATTED WITH ANTIROTATION,
.450" HIGH
2,3
P4
FLATTED WITH ANTIROTATION, .250" HIGH
2,3
S actuator standard when ordered with
C, W-W5, Z & Z3 terminations.
Caps are available separately, see page F-16.
M actuator standard when ordered with
all terminations except C, W-W5, Z & Z3.
Caps are available separately, see page F-16.
Bushing option code not required unless CW splashproof bushing ordered. TP & T1P
actuators not available with CW splashproof bushing. All TXX actuators not available on
single pole models with A-A7, AW-AW4, R terminations.
Bushing option code not required. T2P actuator not available
with CW splashproof bushing or single pole models with
A-A7, AW-AW4, R terminations.
NOTE: Black hardware is supplied when either
black actuators or bushings are specified. For
additional hardware, see section N.
1
L, L1, L2, M, S & TXX actuators not available
with Y1 bushing.
2
L1P, L2P, MP, P1, P3, P4, SP & TXX actuators not
available with D8 & H4 bushing.
3
Antirotation: Provides anti-`push-in' feature on
actuator.
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
Caps are available separately, see page F-16.
Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.)
T2P
FLATTED, ANTIROTATION, .610" HIGH,
15/32 BUSHING
1,2,3
L
.840 (21,34)
L1, L1P
.640 (16,26)
L2, L2P
.550 (13,97)
DIM `A'
OPTION
CODE
NONE
(STD.) BRIGHT CHROME-With Nickle Plated Bushing
2
(STD.) BLACK
0
BRIGHT CHROME-With Black Bushing
S
SATIN CHROME
ACTUATOR FINISH
OPTION
CODE
ACTUATOR FINISH
ACTUATOR
F-7
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
ACTUATOR
Third Angle
Projection
F
Toggle
Replaces K1, K18
Replaces K, K8
*
Gloss Plastic
Chrome Finish
No color choice required.
Locking Positions
03 & 11 Models
3 Position lock
05, 09 & 15 Models
1 Position lock
07 & 13 Models
2 Position lock
01 Models
2 Position lock
08 Models
1 Position lock
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
Finish: Matte (L41 & L42).
L40
LEVER HANDLE WITHOUT CAP
L41
PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4810
L42
PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4811
L3P
ANTIROTATION, .840" HIGH
L3
PLASTIC, .840" HIGH
K9
LOCKING LEVER, .704" HIGH
(unthreaded)
K2
LOCKING LEVER, .704" HIGH
(threaded)
K19
LOCKING LEVER, .732" HIGH
(unthreaded)
K12
LOCKING LEVER, .732" HIGH
(threaded)
NOTE: To prevent accidental actuation, toggle must be lifted
before being actuated. When released, toggle will lock in place.
Overtightening mounting nut may cause actuator to bind.
Locking levers supplied with bushing shown.
Bushing option code not required unless CW splashproof
bushing ordered.
NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability,
order L40 actuator option and lever handles separately, see page F-17. L4X actuators not
available with H4, Y1, Y4 bushings. Antirotation: Provides anti-`push-in' feature on actuator.
NONE
(STD.) NATURAL ALUMINUMWith Nickle Plated Bushing
0
(STD.) NATURAL ALUMINUMWith Black Bushing
2
BLACK ANODIZED ALUMINUM
3
RED ANODIZED ALUMINUM
7
BLUE ANODIZED ALUMINUM
ACTUATOR CAP FINISH
OPTION
CODE
NONE
(STD.) No Actuator Color (L40 option)
2
(STD.) BLACK
1
WHITE
3
RED
PLASTIC ACTUATOR
COLORS
OPTION
CODE
ACTUATOR FINISH/COLOR
ACTUATOR