SPEC NO: DSAA5605
REV NO: V.7 DATE: JUN/28/2005 PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000533
Features
2.1mmX0.6mm RIGHT ANGLE SMT LED, 1.0mm
THICKNESS.
LOW POWER CONSUMPTION.
W IDE V IEW ING A NGLE .
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE: 2000PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2.Tolerance is
0
.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
APA2106SURCK HYPER RED
Description
The Hyper Red source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
2.1x0.6mm RIGHT ANGLE SURFACE LED
LAMP
SPEC NO: DSAA5605
REV NO: V.7 DATE: JUN/28/2005 PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000533
Selection Guide
Part No.
Dice
Lens Type
Iv (mcd)
@ 20mA
Viewing
Angle
Min.
Typ.
2
1/2
APA2106SURCK
HYPER RED (InGaAlP)
WATER CLEAR
50
150
120
Note:
1.
1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at T
A
=25C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
peak
Peak Wavelength
Hyper Red
650
nm
I
F
=20mA
D
Dominant Wavelength
Hyper Red
635
nm
I
F
=20mA
1/2
Spectral Line Half-width
Hyper Red
28
nm
I
F
=20mA
C
Capacitance
Hyper Red
35
pF
V
F
=0V;f=1MHz
V
F
Forward Voltage
Hyper Red
1.95
2.5
V
I
F
=20mA
I
R
Reverse Current
Hyper Red
10
uA
V
R
= 5V
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Parameter
Hyper Red
Units
Power dissipation
170
mW
DC Forward Current
30
mA
Peak Forward Current [1]
185
mA
Reverse Voltage
5
V
Operating / storage Temperature
-40C To +85C
Absolute Maximum Ratings at T
A
=25C
SPEC NO: DSAA5605
REV NO: V.7 DATE: JUN/28/2005 PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000533
Hyper Red APA2106SURCK
SPEC NO: DSAA5605
REV NO: V.7 DATE: JUN/28/2005 PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000533
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
APA2106SURCK
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAA5605
REV NO: V.7 DATE: JUN/28/2005 PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000533
PACKING & LABEL SPECIFICATIONS APA2106SURCK
PDF 
ZIP