www.docs.chipfind.ru
SPEC NO: DSAA8210
REV NO: V.5 DATE: MAR/19/2005 PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203001868
Package Dimensions
Description
The Super Bright Green source color devices are made
with Gallium Phosphide Green Light Emitting Diode.
APT2012SGC SUPER BRIGHT GREEN
2.0x1.25mm SMD CHIP LED LAMP
Features
2.0mmx1.25mm SMT LED,0.75mm THICKNESS.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is
0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAA8210
REV NO: V.5 DATE: MAR/19/2005 PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203001868
Selection Guide
Note:
1.
1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at T
A
=25C
Absolute Maximum Ratings at T
A
=25C
Part No.
Dice
Lens Type
Iv (mcd)
@ 20mA
Viewing
Angle
Min.
Typ.
2
1/2
APT2012SGC
SUPER BRIGHT GREEN (GaP)
WATER CLEAR
4
15
120
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Symbol
Parameter
Device
Typ.
Max.
Test Conditions
Units
peak
Peak Wavelength
Super Bright Green
565
nm
I
F
=20mA
D
Dominant Wavelength
Super Bright Green
568
nm
I
F
=20mA
1/2
Spectral Line Half-width
Super Bright Green
30
nm
I
F
=20mA
C
Capacitance
Super Bright Green
15
pF
V
F
=0V;f=1MHz
V
F
Forward Voltage
Super Bright Green
2.2
2.5
V
I
F
=20mA
I
R
Reverse Current
Super Bright Green
10
uA
V
R
= 5V
Parameter
Super Bright Green
Units
Power dissipation
105
mW
DC Forward Current
25
mA
Peak Forward Current [1]
140
mA
Reverse Voltage
5
V
Operating / Storage Temperature
-40C To +85C
SPEC NO: DSAA8210
REV NO: V.5 DATE: MAR/19/2005 PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203001868
Super Bright Green APT2012SGC
SPEC NO: DSAA8210
REV NO: V.5 DATE: MAR/19/2005 PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203001868
Recommended Soldering Pattern
(Units : mm)
APT2012SGC
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Tape Specifications
(Units : mm)
PDF 
ZIP