3236 Scott Boulevard
Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CHP1230-PM
Features
InGaP HBT Technology
6mm Square, 50 Ohm Power Module
Single Positive Supply
35% Linear Power Added Efficiency
+28.5 dBm Output Power (CDMA)
+28.0 dBm Output Power (CDMA2K 1X)
30 dB Gain at Operating Output Power
On-Board Power Down Mode
Applications
Korea PCS Handsets
CDMA Handsets
CDMA2K 1X Handsets
Description
The CHP1230-PM is a 50 ohm matched, single sup-
ply, linear power amplifier module intended for use in Korean
handsets. The highly integrated amplifier meets the require-
ments of Korea PCS CDMA systems. It is a member of
Celeritek's new TrueTriangleTM family of 3V power ampli-
fier modules.
The CHP1230-PM is packaged in a low-cost, space
efficient, 6mm square, matched module that provides excellent
electrical stability and low thermal resistance. The module
operates from a fixed positive voltage and requires no external
matching which significantly reduces space, cost and enhances
ease of use.
The 6x6 mm package is self contained, incorporating
50 ohm input and output matching networks optimized for
output power, linearity and efficiency.
Celeritek's InGaP HBT technology offers a thermally
robust and reliable PAM (power amplifier module) solution.
1.75 to 1.78 GHz
3.5V, 28.5 dBm, Korea PCS
InGaP HBT Amplifier Module
Preliminary Product Specifications
July 2002
(1 of 6)
Functional Block Diagram
Absolute Maximum Ratings
Parameter
Rating
Parameter
Rating
Parameter
Rating
Collector Voltage (+Vcc)
+6.0 V*
Reference Voltage (Vref)
+3.1 V
Operating Temperature
-40C to +85C
Collector Current (Icc)
1.2 A
Power Dissipation
5 W
Storage Temperature
-65C to +150C
RF Input Power
7 dBm
Soldering Temperature
260C for 5 Sec.
Recommended Operating Conditions
Parameter
Typ
Units
Parameter
Typ
Units
Collector Voltage (+Vcc)
3.2 to 4.1
Volts
Operating Temperature (PC Board)
-20 to +70
C
Reference Voltage (Vref)
+2.95 (1.2%)
Volts
(Fixed and regulated)
Application Information
The CHP1230-PM is a three-stage amplifier that requires a
single regulated positive supply along with the unregulated bat-
tery voltage for proper operation. Vref is a regulated 2.95 refer-
ence voltage for the bias control circuitry. It can also be used as
a power down mode select. Vcc is an unregulated supply volt-
age directly from the battery. Vcc should be applied prior to
Vref and before RF input power. The CHP1230-PM can be
operated over a range of supply voltages and bias points by
adjustment of Vref. It is important that the maximum power
dissipation of the package be observed at all times and that the
maximum voltage across the device is not exceeded.
Circuit Design Considerations
Biasing The positive Vcc supply voltages are applied to pins
3 and 4. Most bypass decoupling is provided on-board. Vref is
applied to pin 1.
The recommended DC bypass capacitance is shown in the
schematic diagram on Page 5.
Inadequate bypass capacitance and inductance around the
DC supply lines can compromise the adjacent channel power
ratio (ACPR), reduce power gain and/or create oscillations.
Continued on Page 2
TM
* RF Off.
Vref 1
RF IN 2
Vcc 3
6 N/C
5 RF OUT
4 Vcc
Ground connection is
on backside
BIAS
3236 Scott Boulevard, Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CHP1230-PM
Preliminary Product Specifications - July 2002
(2 of 6)
Parameter
Condition
Min
Typ
Max
Units
Frequency Range
1.75
1.78
GHz
Gain
Pout = +28.5 dBm
29
31
33
dB
Gain Delta
Pout = +28.5 to +12.0 dBm
3.0
dB
Gain Ripple*
1750-1780 MHz
1.0
1.5
dB
Gain Variation
Over supply voltage
2
dB/V
Over temperature
0.03
dB/C
Power Output
CDMA mode
+28.5
dBm
Harmonics
2nd @ Digital power output, no output trapping, Po = +28.5 dBm
-30
dBc
3rd @ Digital power output, no output trapping, Po = +28.5 dBm
-30
dBc
Noise Power in Receive Band
-90
dBm
Linearity (ACPR)
CDMA mode @ +28.5 dBm Pout, 1.25 MHz offset
-53
-48
dBc/30KHz
CDMA mode @ +12.0 dBm Pout, 1.25 MHz offset
-56
-50
dBc/30KHz
CDMA mode @ +28.5 dBm Pout, 1.98 MHz offset
-58
-56
dBc/30KHz
CDMA2K 1X mode** @ +28.5 dBm Pout, 1.25 MHz offset
-48
-47
dBc/30KHz
CDMA2K 1X mode** @ +12.0 dBm Pout, 1.25 MHz offset
-55
-48
dBc/30KHz
CDMA2K 1X mode** @ +28.5 dBm Pout, 1.98 MHz offset
-63
-58
dBc/30KHz
Ruggedness
6:1 VSWR @ 28.5 dBm Pout
no damage
Noise Figure
5.0
6.0
dB
Input Return Loss
-10
dB
Icc (Vcc = 3.5V)
Pout = +12.0 dBm - CDMA mode
100
110
mA
Pout = +28.5 dBm - CDMA mode
565
590
mA
Quiescent Current (Iq)
No RF
55
mA
Vref Supply Current (Iref)
3.0
5.0
mA
Vref Supply Voltage (Vref)
Fixed and regulated (1.2% tolerance)
2.95
V
Leakage Current
Vref = 0 V, Vcc = 3.5 V
10
A
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature with collector voltage (+Vcc) = 3.5 V.
* Specifications guaranteed over the temperature range of -20C to +70C. ** Modulation HPSK in 1.2288 MHz, RC3 PAR = 4.7 @ 1% CCDF.
Modulation When biased as specified, the CHP1230-PM will
achieve the required adjacent channel response for the digital
system specified. Celeritek tests 100% of each product under
digital modulation to ensure correlation to customer applica-
tions.
Thermal
1. The ground pad on the backside of the CHP1230-PM must
be soldered to the ground plane.
2. All leads of the package must be soldered to the appropriate
electrical connection.
Continued from Page 1
TM
3236 Scott Boulevard
Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CHP1230-PM
Preliminary Product Specifications - July 2002
(3 of 6)
TM
Typical Performance
Gain vs Power Output
ACPR vs Power Output
(CDMA2K 1X Mode @ 1.25 MHz Offset)
3236 Scott Boulevard, Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CHP1230-PM
Preliminary Product Specifications - July 2002
(4 of 6)
TM
Typical Performance
ALTCH Power vs Power Output
(CDMA2K 1X Mode @ 1.98 MHz Offset)
Current vs Power Output
3236 Scott Boulevard
Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CHP1230-PM
Preliminary Product Specifications - July 2002
(5 of 6)
TM
Ordering Information
The CHP1230-PM is available in a surface mount 50 ohm matched module and devices are available in tube or tape and reel.
Part Number for Ordering
Package
CHP1230-PM-0000
PM6 surface mount power package in tube
CHP1230-PM-000T
PM6 surface mount power package in tape and reel
PB-CHP1230-PM
Evaluation Board with SMA connectors for CHP1230-PM
Recommended Application Circuit
Note: This schematic represents the topology of the application cir-
cuit recommended by Celeritek.
PCB Footprint (Minimum Pad Dimensions)
0.015 (0.38) DIA.
VIA HOLE X21
0.032 (0.80)
MIN. X6
0.240
(6.10)
0.060 (1.50) MIN.
0.295 (7.50)
0.100 (2.55)
0.054 (1.36) X4
DIMENSIONS IN INCHES (mm)
DRAWING NOT TO SCALE
0.015 (0.40)
RADIUS
X12
Evaluation Board Schematic
Board substrate:
ER = 4.60
Thickness = 0.031 in.
RF OUT
50
Vref
N/C
Vcc
RF IN
CHP1230-PM
50
3.9 pF
0.1 F
3.3F
1
2
3
4
5
6
10 F
0.1 F
Physical Dimensions
3236 Scott Boulevard, Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CHP1230-PM
Preliminary Product Specifications - July 2002
(6 of 6)
Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the
suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating
parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Celeritek does not convey any license under its patent
rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body,
or other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal
injury or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent
regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer.
TM
Notes
PDF 
ZIP