PRODUCT INFORMATION

Europe: Tel (46) 8 58 02 45 00

Fax (46) 8 58 02 01 10

Tel (44) 1291 436180

Fax (44) 1291 436771

America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia:

Tel (65) 293 5312

Fax (65) 293 8527

840

4D470

PIN Array

Parallel Datacom, Telecom

13628.11 1999-01-13

CATHODE

FRONT VIEW

ANODES

METAL SHIELD

HEAT SINK

MT GUIDE PINS

LEADS

SIDE VIEW

PIN Array in MT Package

All dimensions in mm

Optical and Electrical Characteristics

(25� C Case Temperature)

Test Condition:

R=3.3V or 5V. Fiber Ribbon: 50/125 GI, NA=0.2 or 62.5/125 GI, NA=0.275.

Note 1: Crosstalk between adjacent channels operating at 2GHz.

PARAMETER

SYMBOL

MIN.

TYP.

MAX.

UNIT

TEST CONDITION

Responsivity

0.45

A/W

=850nm

Bandwidth

(3dBel)

GHz

=50

Capacitance

f=1MHz

Dark Current

0.4

Crosstalk

-30

dBel

=850nm

(Note 1)

Absolute Maximum Ratings

Thermal Characteristics

PARAMETER

SYMBOL

MIN.

TYP.

MAX.

UNIT

Temperature Coefficient - Dark Current

dId/dTj

%/ C

PARAMETER

SYMBOL

LIMIT

Storage Temperature

Tstg

-40 to +85 C

Operating Temperature

Top

0 to +70 C

Reverse Voltage

20V

Soldering Temperature

(2mm from the case for 10 sec)

Tsld

260 C

This device consists of a 4-channel PIN
Photodiode array in a miniature sur-
face-mountable MT package. It is
based on a unique combination of self-
alignment technology and direct opti-
cal coupling to fiber, resulting in opti-
mum coupling efficiency without need
for active alignment. Applications
include parallel Fibre Channel and
optical interconnect inter/intra-board.
And it matches the 4D469 VCSEL
Array.

PRELIMINAR

The cathode is connected to the metal shield

http://www.mitelsemi.com

World Headquarters - Canada

Tel: +1 (613) 592 2122

Fax: +1 (613) 592 6909

North America

Asia/Pacific

Europe, Middle East,

Tel: +1 (770) 486 0194

Tel: +65 333 6193

and Africa (EMEA)

Fax: +1 (770) 631 8213

Fax: +65 333 6192

Tel: +44 (0) 1793 518528

Fax: +44 (0) 1793 518581

South America

Tel/Fax: +55 (48) 225 2061

Information relating to products and circuits ("Product") furnished herein by Mitel Corporation or its subsidaries ("Mitel") is believed to be reliable. However, Mitel assumes no liability for errors

that may appear in this document, or for liability otherwise arising from the application or use of any such information or Product or for any infringement of patents or other intellectual property

rights owned by third parties which may result from such application or use. Neither the supply of such information or the purchase of Product conveys any license, either expressed or

implied, under patents or other intellectual property rights owned by Mitel or licensed from third parties by Mitel, whatsoever. Purchasers of Products are also hereby notified that the use of

Product in certain ways or in combination with Mitel or non-Mitel furnished goods or services may infringe patents or intellectual property rights owned by Mitel. The Products, their

specifications and the information appearing in the document are subject to change by Mitel without notice.

TECHNICAL DOCUMENTATION � NOT FOR RESALE

M Mitel (design) and ST-BUS are registered trademarks of MITEL Corporation

Mitel Semiconductor is an ISO 9001 Registered Company

All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.

Preliminary and Advance Data/Information: Some datasheets carry the designation "Preliminary" or "Advance". Preliminary Information represents
the design objective for a device type in development and may be revised without notice before the device reaches production. Advance
Information is intended for design guidance purposes and refers to a device type in early production where device characterization is
ongoing and information is still subject to change without notice. Current information on the status of Preliminary or Advance programs may
be obtained from Mitel Sales Offices, Representatives or Distributors.

TECHNICAL DOCUMENTATION - NOT FOR RESALE

World Headquarters - Canada

Tel: +1 (613) 592 2122

Fax: +1 (613) 592 6909

North America

Asia/Pacific

Europe, Middle East,

Tel: +1 (770) 486 0194

Tel: +65 333 6193

and Africa (EMEA)

Fax: +1 (770) 631 8213

Fax: +65 333 6192

Tel: +44 (0) 1793 518528

Fax: +44 (0) 1793 518581

http://www.mitelsemi.com

Information relating to products and services furnished herein by Mitel Corporation or its subsidiaries (collectively "Mitel") is believed to be reliable. However, Mitel assumes no
liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of
patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or
service conveys any license, either express or implied, under patents or other intellectual property rights owned by Mitel or licensed from third parties by Mitel, whatsoever.
Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Mitel, or non-Mitel furnished goods or services may infringe patents or
other intellectual property rights owned by Mitel.

This publication is issued to provide information only and (unless agreed by Mitel in writing) may not be used, applied or reproduced for any purpose nor form part of any order or
contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this
publication are subject to change by Mitel without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or
service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific
piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or
data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in
any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Mitel's
conditions of sale which are available on request.

Электронный компонент: 4D470