109
X
O
MHR Series
9x14 mm, 5.0 Volt, HCMOS/TTL, Clock Oscillators
* Consult factory regarding availability of "B" and "C" symmetry codes, and "8" stability code.
Pin Connections
NOTE: A capacitor of value 0.01
F or greater between Vdd and
Ground is recommended.
1. Symmetry is measured at 1.4 V with TTL load, and at 50% Vdd with HCMOS load.
2. TTL load - See load circuit diagram #1 on page 148. HCMOS load - See load circuit diagram #2 on page 148.
2. Rise/fall times are measured between 0.5 V and 2.4 V for TTL load, and between 10% and 90% Vdd for HCMOS load.
PDF 
ZIP