100 Hz to 2 GHz
DUAL-IN-LINE
AMPLIFIED NOISE
MODULES
General Specifications:
Crest factor
5:1
High-end roll off
6 dB per octave typical
Operating voltage
+15 VDC, +12 VDC
optional
Storage temperature
-65 to +125C
Operating
Commercial -40 to
temperature
+85C; Military -55
to +125C
Typical temperature
0.025 dB/C
coefficient
Housing
24-pin packages;
14-pin optional
Specifications subject to change without notice.
The
NC2000 Series
amplified noise
modules are an excellent choice
when a high-level noise output
is desired and the noise
source must be mounted
on a circuit board.
The
NC2000 Series
modules are housed
in 24-pin dual-in-
line packages.
Modified specifications are
also available in 14-pin dual-in-line
packages. Consult Noise Com for availability.
Applications:
Dither circuitry for A/D converters
Communications jamming
Gain-bandwidth product testing
Built-in test equipment (BITE)
2 6
www.noisecom.com
nc2000 series
Rev Date 5/15/03
2 7
To order call 201-261-8797
NC2000 SERIES
COMPONENTS
OPTIONS
Option Number
Description
NC2opt01
Military version in compliance with MIL-E-5400T Class 2 (add suffix M).
NC2opt02
TTL control "High" is on (add suffix T).
NC2opt03
Inverted TTL control "Low" is on (add suffix IT).
NC2opt04
14-pin instead of 24-pin package (NC2201 -- NC2601 models only)
NC2opt05
+12 VDC operating voltage (instead of +15 VDC)
NC2000 SERIES
MODEL
FREQUENCY
OUTPUT CHARACTERISTICS
LOAD
I (max)
RANGE
OUTPUT LEVEL FLATNESS (dB) dBm/Hz V/
?
Hz IMPEDANCE(
?
) (mA)
NC2101
100 Hz - 20 kHz
0.150 Vrms
0.75
-63
1061.0
2200
10
NC2102
100 Hz - 100 kHz
0.150 Vrms
0.75
-70
474.0
2200
10
NC2105
500 Hz - 10 MHz
0.150 Vrms
1.0
-87
47.4
1000
10
NC2201* 1 MHz - 100 MHz
+5 dBm
0.75
-75
40.0
50
100
NC2401* 1 MHz - 500 MHz
0 dBm
1.0
-87
10.0
50
100
NC2501* 1 MHz - 1 GHz
-5 dBm
1.0
-95
4.0
50
100
NC2601* 1 MHz - 2 GHz
-5 dBm
2.0
-98
2.8
50
100
*Crest factor is 2:1 for these models
NC2000 Series 24-pin Package Dimensions (inches)
NC2000 Series 14-pin Package Dimensions (inches)
PIN 1-6
= GROUND
PIN 7
= TTL (OPTION)
PIN 8-12
= GROUND
PIN 13
= OUTPUT
PIN 14-17 = GROUND
PIN 18
= +15
PIN 19-24 = GROUND
PIN 1-6
= GROUND
PIN 7
= TTL (OPTION)
PIN 8
= OUTPUT
PIN 9-13 = GROUND
PIN 14
= +15
Rev Date 5/15/03
PDF 
ZIP