OKI Semiconductor
FEDL9092-01
Issue Date: Nov. 4, 2003
ML9092-01/02/03/04
LCD Driver with Key Scanner and RAM
1/66
GENERAL DESCRIPTION
The ML9092-01/02/03/04 are LCD drivers that have internal RAM and a key scan function. They are best suited
for car audio displays.
Since 1-bit data of the display data RAM corresponds to the light-on or light-off of 1-dot of the LCD panel (a bit
map system), a flexible display is possible.
A graphic display system of a maximum of 60
10 dots (56 10 dots for ML9092-01, 60 10 dots for
ML9092-02/03/04). can be implemented.
The ML9092-01/02 do not require any power supply circuit to drive the LCD, because they have internal voltage
doublers. (If a large-sized panel is driven, use the ML9092-03, to which the LCD driving voltage is supplied
externally.)
The internal key scan circuit (5
5 key scanning for ML9092-01/04, 6 4 key scanning for ML9092-02/03) has
eliminated the needs of key scanning by the CPU, thereby enabling the efficient use of the CPU ports.
FEATURES
Logic voltage
: 4.5 to 5.5 V
LCD drive voltage
: 4.5 to 16.5 V (positive voltage)
Segment output
: 56 outputs for ML9092-01; 60 outputs for ML9092-02/03/04
Common output
: 10 outputs
Built-in bit-mapped RAM
: 60
10 = 600 bits (for ML9092-01 only: 56 10 = 560 bits for the RAM
display area)
4-pin serial interface with CPU:
CS, CP, DI/O, KREQ
Built-in LCD drive bias resistors
Built-in voltage doubler circuit
For the ML9092-01/04, the built-in 5 5 key scanner makes it possible to read the status of 25 key switches and
1-channel rotary encoder. In addition, the ML9092-01/04 have an 8-bit, 3-channlel PWM circuit built in.
For the ML9092-02/03, the built-in 6
4 key scanner makes it possible to read the status of 24 key switches and
1-channel rotary encoder.
Port A output
: 1 pin, output current = 15 mA
: Can be used for LED driving
Port B output
: 3 pins, output current = 2 mA
: Applies to ML9092-01/04 (capable of PWM
output)
Port C output
: 5 pin, output current = 2 mA
: Applies to ML9092-01 only
Port D output
: 5 pins, output current = 2 mA
: Applies to ML9092-01 only
Temperature range
: 40 to +85
C
Package: 100-pin plastic TQFP (TQFP100-P-1414-0.50-K)
(Product name: ML9092-01TB, ML9092-02TB, ML9092-03TB, ML9092-04TB)
FEDL9092-01
OKI Semiconductor
ML9092-01/02/03/04
Comparison between the ML9092-01, ML9092-02, ML9092-03, and ML9092-04
Item
ML9092-01 ML9092-02 ML9092-03 ML9092-04
Number of common outputs
10 Max. 10
Max. 10
Max. 10
Max.
Number of dots on the LCD screen
(selectable by program)
8
56
9
56
10
56
8
60
9
60
10
60
8
60
9
60
10
60
8
60
9
60
10
60
Number of port A outputs
1
1
1
1
Number of port B outputs
3
0
0
3
Number of port C and D outputs (see
note below)
5
each
0 0 0
Key scan (see note below)
5
5 key scan
4
6 key scan
4
6 key scan
5
5 key scan
Rotary encoder
1 channel
1 channel
1 channel
1 channel
Voltage doubler
Yes
Yes
No
No
PWM circuit
8-bit, 3-channel
No
No
8-bit, 3-channel
Note: The key scan function and port C/D cannot be used concurrently. Use either.