OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue 1.0 0505
Page 1
4-Pin Amber LED Lamp (7.6mm)
OVFSAAC8
x
Packaged in tubes
x
Compatible with automatic placement equipment
x
Compatible with infrared and vapor phase reflow solder process
x
Mono-color type
x
Pb-free
The OVFSAAC8
is designed with higher forward voltage to maximize brightness and incorporates a low-profile
lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low cur-
rent requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This square
package allows high-density arrays to form light engines.
Applications
x
Automotive: Rear Stop/Turn Signal Lamps/Truck Marker Lamps
x
Mood-setting Decoration and Landscape Lighting
x
Special Decorative Interior/Exterior Lighting
x
Special Effects Stage Lighting
x
Illumination for Signs and Channel Letters
x
Traffic Signals, Pedestrian and Walkway Signs
Product Photo Here
RoHS
Data is subject to change without prior notice.
Part Number
Material
Emitted Color
Flux Typ. mlm
OVFSAAC8
AlInGaP
Amber
5000
Lens Color
Water Clear
2,3 ANODE
1,4 CATHODE
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue 1.0 0505
Page 2
4-Pin Amber LED Lamp (7.6mm)
OVFSAAC8
Storage Temperature Range
-40 ~ +100C
Operating Temperature Range
-40 ~ +100C
Lead Soldering Temperature (3mm from the base of the epoxy bulb)
1
260C
Reverse Voltage
5 V
Continuous Forward Current
2
70 mA
Peak Forward Current (10% Duty Cycle, PW
VHF
200 mA
Power Dissipation
210 mW
Absolute Maximum Ratings
T
A
= 25
o
C unless otherwise noted
Notes:
1. Solder time less than 5 seconds at temperature extreme.
2. Heat sink is adequate if the device is operated at ambient temperature higher than 25C. For long term performance the drive currents
between 10mA and 50mA are recommended. Please contact an Optek sales representative for more information on recommended drive
conditions.
Electrical Characteristics
T
A
= 25
o
C unless otherwise noted
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
CONDITIONS
lumen
Luminous Flux
3000
5000
----
mlm
I
F
= 70mA
V
F
Forward Voltage
----
2.5
3.0
V
I
F
= 70mA
I
R
Reverse Current
----
----
100
A
V
R
= 5V
D
Dominant Wavelength
584
591
599
nm
I
F
= 70mA
2
50% Power Angle
----
100
----
deg
I
F
= 70mA
Standard Bins
(I
F
= 70mA)
Lamps are sorted to luminous flux (
V
), forward voltage (V
F
), and dominant wavelength (
D
) bins shown.
Orders for OVFSAAC8 may be filled with any or all bins contained as below.
Rank
V3
V4
V5
V6
V7
Voltage (V)
2.02.2
2.22.4
2.42.6
2.62.8
2.83.0
Forward Voltage (V
F
)
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
5000-7300
M
4000-6100
L
3500-4800
K
3000-4200
J
L
u
m
i
n
o
u
s
F
l
u
x
(
m
l
m
)
Dominant Wavelength (nm)
Luminous flux is at
J bin or above.
584
599
590
593
596
587
X2
X3
X4
X5
X6
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue 1.0 0505
Page 3
4-Pin Amber LED Lamp (7.6mm)
OVFSAAC8
Typical Electro-Optical Characteristics Curves
C
Maximum Forward DC Current vs. Ambient
Temperature
A
V
Reverse Current vs. Reverse Voltage
Relative Luminous Flux vs. Forward Current
I
F
(mA)
Forward Current vs. Forward Voltage
V
mA
Relative Luminous Flux vs. Wavelength
nm
Half Power WL = 20nm
Far Field Pattern
50% Power Angle: 100
mA
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue 1.0 0505
Page 4
4-Pin Amber LED Lamp (7.6mm)
OVFSAAC8
Moisture Resistant Packaging
60/Tube
Aluminum Moisture-proof Bag
Desiccant
Bar Code Label
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue 1.0 0505
Page 5
Issue
Change Description
Approval
Date
1.0
Initial Release
R. Bailey
5/19/05
4-Pin Amber LED Lamp (7.6mm)
OVFSAAC8
PDF 
ZIP