Issue 1.0 0705
Page 1
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Round Red Through-hole LED
Lamp (3mm)
Product Photo Here
Part Number
Material
Emitted Color
Intensity Typ. mcd
OVLBR4C7
AlInGaP
Red
1800
Lens Color
Water Clear
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
RoHS
OVLBR4C7
x
High Brightness with Well-defined Spatial Radiation Patterns
x
UV-resistant Epoxy Lens
x
Red (623nm)
The OVLBR4C7 is a high-intensity AlInGaP LED mounted in a clear plastic T-1 package. Its UV-resistant epoxy
lens makes this device an optimal solution for outdoor applications. This LED provides a well-defined and even
emission pattern.
Applications
x
Pedestrian Signals
x
Signage and Architectural Lighting
x
Backlighting
x
Automotive
x
Outdoor/Indoor Displays
Issue 1.0 0705
Page 2
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Round Red Through-hole LED (3mm)
OVLBR4C7
Absolute Maximum Ratings
T
A
= 25
o
C unless otherwise noted
Storage Temperature Range
-40 ~ +100C
Operating Temperature Range
-40 ~ +85C
Reverse Voltage
5 V
Continuous Forward Current
30 mA
Peak Forward Current (10% Duty Cycle, 1KHz)
100 mA
Power Dissipation
78 mW
Current Linearity vs. Ambient Temperature
-0.5 mA/C
LED Junction Temperature
125C
Lead Soldering Temperature (3mm from the base of the epoxy bulb)
1
260C
Note:
1. Solder time less than 5 seconds at temperature extreme.
Electrical Characteristics
T
A
= 25
o
C unless otherwise noted
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
CONDITIONS
I
v
Luminous Intensity
1135
1800
----
mcd
I
F
= 20mA
V
F
Forward Voltage
----
2.2
2.6
V
I
F
= 20mA
I
R
Reverse Current
----
----
10
A
V
R
= 5V
D
Dominant Wavelength
619
623
630
nm
I
F
= 20mA
2 H-H
50% Power Angle
----
45
----
deg
I
F
= 20mA
P
Peak Wavelength
----
633
----
nm
I
F
= 20mA
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000PPM.
Standard Bins
(I
F
= 20mA)
Lamps are sorted to luminous intensity (I
V
) and dominant wavelength (
D
) bins shown.
Orders for OVLBR4C7 may be filled with any or all bins contained as below.
Beam Pattern
Rank
G
H
J
6
Voltage
1.82.0
2.02.2
2.22.4
2.42.6
Forward Voltage
Dominant Wavelength (nm)
3115
2225
0U
1590
0T
1135
0S
Luminous intensity is
at 0S bin or above.
619
626
630
L
u
m
i
n
o
u
s
I
n
t
e
n
s
i
t
y
(
m
c
d
)
R3
R1
R2
623
Issue 1.0 0705
Page 3
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Round Red Through-hole LED (3mm)
OVLBR4C7
Typical Electro-Optical Characteristics Curves
Relative Luminous Intensity vs. Wavelength
mA
Forward Current vs. Forward Voltage
V
mA
Half Power WL = 25nm
%
Relative Luminous Intensity vs. Forward Current
mA
%
Relative Luminous Intensity vs. Ambient
Temperature
C
%
Forward Current vs. Ambient Temperature
C
mA
Reverse Current vs. Reverse Voltage
V
A
Issue 1.0 0705
Page 4
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Round Red Through-hole LED (3mm)
OVLBR4C7
Moisture Resistant Packaging
Label
Aluminum Moisture-proof Bag
Desiccant
Bar Code Label
Carrier Tape Dimensions: Loaded Quantity 2500 PCS per Reel
Packing Information: Available in Bulk or Reel
Bulk: 500 pcs/bag
13-Inch Reel: 2500 pcs/reel
Issue 1.0 0705
Page 5
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue
Change Description
Approval
Date
1.0
Initial Release
J. Haynie
7/20/05
Round Red Through-hole LED (3mm)
OVLBR4C7
PDF 
ZIP