OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 12/05
Page 1 of 3
Oval Green LED Lamp
(5 mm)
OVLHGKD8
x
High luminous intensity
x
Defined spatial radiation
x
Multiple viewing angles
x
UV-resistant epoxy
x
Precision optical performance
The
OVLHGKD8
is designed for superior performance in outdoor environments. Its radiation pattern matches red
(OVLHRKD8), blue (OVLHBKD8), and orange (OVLHQKD8) devices in identical packages to create LED pixels
for full-color video screens.
Applications
x
Variable message signs
x
Indoor/outdoor advertising signage
x
Traffic and highway signs
x
Full-color video signs
Product Photo Here
Part Number
Material
Emitted Color
Intensity Typ. mcd
OVLHGKD8
InGaN
Green
1100
Lens Color
Green Diffused
1 ANODE 2 CATHODE
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
RoHS
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 12/05
Page 2 of 3
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Oval Green LED Lamp (5 mm)
OVLHGKD8
Absolute Maximum Ratings
T
A
= 25
o
C unless otherwise noted
Note:
1. Solder time less than 3 seconds at temperature extreme.
Electrical Characteristics
T
A
= 25
o
C unless otherwise noted
Standard Bins
(I
F
= 20mA)
Lamps are sorted to luminous intensity (I
V
) and dominant wavelength (
D
) bins shown.
Orders for OVLHGKD8 may be filled with any or all bins contained as below.
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
L
u
m
i
n
o
u
s
I
n
t
e
n
s
i
t
y
(
m
c
d
)
Dominant Wavelength (nm)
15202130
U
11001520
T
7701100
S
520
525
535
530
Luminous intensity is
at S bin or above.
Storage Temperature Range
-40 ~ +100 C
Operating Temperature Range
-40 ~ +95 C
Reverse Voltage
5 V
Continuous Forward Current
25 mA
Peak Forward Current (10% Duty Cycle, 1KHz)
100 mA
Power Dissipation
105 mW
260 C
Lead Soldering Temperature (3mm from the base of the epoxy bulb)
1
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
CONDITIONS
I
v
Luminous Intensity
770
1100
----
mcd
I
F
= 20 mA
V
F
Forward Voltage
----
3.6
4.2
V
I
F
= 20 mA
I
R
Reverse Current
----
----
100
A
V
R
= 5 V
D
Dominant Wavelength
520
525
535
nm
I
F
= 20 mA
2 H-H
50% Power Angle
----
110
----
deg
I
F
= 20 mA
2 V-V
----
50
----
deg
I
F
= 20 mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 12/05
Page 3 of 3
Reverse Current vs Reverse Voltage
A
V
Oval Green LED Lamp (5 mm)
OVLHGKD8
Typical Electro-Optical Characteristics Curves
Forward Current vs Forward Voltage
mA
V
Relative Luminous Intensity vs Forward Current
%
mA
Far Field Pattern
50% Power Angle: H-H: 110 V-V: 50
H-H
V-V
Maximum Forward DC Current vs Ambient
Temperature
mA
C
Half Power WL = 38nm
100
175
50
25
0
%
300
400
600
700
800
500
Relative Luminous Intensity vs Wavelength
mA
PDF 
ZIP