OT 12/230-240/10
Electronical stabilized LED-supply
Technical
Information
Edition: Jan. 2001
subject to change
Technical data:
Reference:
OT 12/230-240/10
for LED modules:
respect to the output conditions
Line voltage, nominal:
230V / 240V
Line current, nominal:
0,07 A
rms
Line frequency:
0/50/60 Hz
Output voltage:
DC voltage 10,5V
0,5V
electronical stabilized,
line ripple max.
0,2V
Max. module wattage:
12 W
Losses:
max. 3,6 W (at 12 W output wattage)
Partial load:
0,4 W 12 W
Max. allowed voltage:
240 Vrms + 6 %
Power factor:
0,9
Radio interference:
Harmonic content:
Immunity:
EN 55015
EN 61000-3-2
EN 61547
Temperature range:
-20 C bis +50 C
Galvanic insulation between primary
and secondary side:
3 kVrms
Dimming:
no
Non-load proof:
yes
Short circuit protection:
autom. reversible, 30 min.
Overload protection:
autom. switch off reversible
Overheating protection:
autom. switch off reversible
Connections:
screw terminals
10 V-wiring:
max. 4 m
Primary:
NYM 3 x 1,5 mm
2
/ H03VV - F2 x 0,75
Secondary:
NYM 3 x 1,5 mm
2
/ H03VV - F2 x 0,75
Wire stripping:
sheath 1,2 cm; conductors 0,6 cm
Wire cross section, primary:
1,5 mm bis 0,75 mm
Wire cross section, secondary:
1,5 mm bis 0,75 mm
Geometry (l x b x h):
109 mm x 50 mm x 35 mm
Approvals:
;
PDF 
ZIP