Document Outline
- GENERAL DESCRIPTION
- FUNCTIONAL DESCRIPTION
- Output stage and protection circuit
- Driver and switching circuit
- Flyback generator
- Guard circuit
- Voltage stabilizer
- RATINGS
- CHARACTERISTICS
- APPLICATION INFORMATION
- PACKAGE OUTLINES
- SOLDERING
- DEFINITIONS
- LIFE SUPPORT APPLICATIONS
DATA SHEET
Product specification
File under Integrated Circuits, IC02
March 1991
INTEGRATED CIRCUITS
TDA3653B
TDA3653C
Vertical deflection and guard circuit
(90)
March 1991
2
Philips Semiconductors
Product specification
Vertical deflection and guard circuit
(90)
TDA3653B
TDA3653C
GENERAL DESCRIPTION
The TDA3653B/C is a vertical deflection output circuit for drive of various deflection systems with currents up to
1.5 A peak-to-peak.
Features
Driver
Output stage
Thermal protection and output stage protection
Flyback generator
Voltage stabilizer
Guard circuit
QUICK REFERENCE DATA
Note to the quick reference data
1. The maximum supply voltage should be chosen such that during flyback the voltage at pin 5 does not exceed 60 V.
PACKAGE OUTLINES
TDA3653B: 9-lead SIL; plastic (SOT110B); SOT110-1; 1996 November 25.
TDA3653C: 9-lead SIL; plastic power (SOT131); SOT131-2 November 25.
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Supply (note 1)
Supply voltage range
pin 9
V
P
= V
9-4
10
-
40
V
pin 6
V
6-4
-
-
60
V
Output (pin 5)
Peak output voltage during flyback
V
5-4M
-
-
60
V
Output current
I
5(p-p)
-
1.2
1.5
A
Operating junction temperature range
T
j
-
25
-
+
150
C
Thermal resistance junction to mounting base
(SOT110B)
R
th j-mb
-
10
-
K/W
(SOT131)
R
th j-mb
-
3.5
-
K/W
March 1991
3
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
Fig.1 Block diagram.
March 1991
4
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
FUNCTIONAL DESCRIPTION
Output stage and protection circuit
Pin 5 is the output pin. The supply for the output stage is fed to pin 6 and the output stage ground is connected to pin 4.
The output transistors of the class-B output stage can each deliver 0.75 A maximum.
The maximum voltage for pin 5 and 6 is 60 V.
The output power transistors are protected such that their operation remains within the SOAR area. This is achieved by
the co-operation of the thermal protection circuit, the current-voltage detector, the short-circuit protection and the special
measures in the internal circuit layout.
Driver and switching circuit
Pin 1 is the input for the driver of the output stage. The signal at pin 1 is also applied via external resistors to pin 3 which
is the input of a switching circuit. When the flyback starts, this switching circuit rapidly turns off the lower output stage
and so limits the turn-off dissipation. It also allows a quick start of the flyback generator.
External connection of pin 1 to pin 3 allows for applications in which the pins are driven separately.
Flyback generator
During scan the capacitor connected between pins 6 and 8 is charged to a level which is dependent on the value of the
resistor at pin 8 (see Fig.1).
When the flyback starts and the voltage at the output pin (pin 5) exceeds the supply voltage, the flyback generator is
activated.
The supply voltage is then connected in series, via pin 8, with the voltage across the capacitor during the flyback period.
This implies that during scan the supply voltage can be reduced to the required scan voltage plus saturation voltage of
the output transistors.
The amplitude of the flyback voltage can be chosen by changing the value of the external resistor at pin 8.
It should be noted that the application is chosen such that the lowest voltage at pin 8 is > 2.5 V, during normal operation.
Guard circuit
When there is no deflection current and the flyback generator is not activated, the voltage at pin 8 reduces to less than
1.8 V. The guard circuit will then produce a DC voltage at pin 7, which can be used to blank the picture tube and thus
prevent screen damage.
Voltage stabilizer
The internal voltage stabilizer provides a stabilized supply of 6 V to drive the output stage, which prevents the drive
current of the output stage being affected by supply voltage variations.
March 1991
5
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
RATINGS
Limiting values in accordance with the Absolute Maximum System (IEC 134);
pins 4 and 2 externally connected to ground.
Note
1. Non-repetitive duty factor maximum 3.3%.
PARAMETER
SYMBOL
MIN.
MAX.
UNIT
Supply voltage (pin 9)
V
P
= V
9-4
-
40
V
Supply voltage output stage (pin 6)
V
6-4
-
60
V
Output voltage (pin 5)
V
5-4
-
60
V
Input voltage (pins 1 and 3)
V
1; 3-2
-
V
P
V
External voltage at pin 7
V
7-2
-
5.8
V
Peak output current (pin 5)
repetitive
I
5RM
-
0.75
A
non-repetitive
I
5SM
-
1.5
A
(1)
Peak output current (pin 8)
repetitive
I
8RM
0.85
0.75
A
non-repetitive
I
8SM
-
1.5
A
(1)
Total power dissipation
P
tot
see Fig.2
Storage temperature range
T
stg
-
55
+
150
C
Operating ambient temperature range
T
amb
see Fig.2
Operating junction temperature range
T
j
-
25
+
150
C
Fig.2 Power derating curves (for SOT110B).
Fig.3 Quiescent current I
4
as a function of supply
voltage V
P.
March 1991
6
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
CHARACTERISTICS
V
P
= V
9-4
= 26 V; T
amb
= 25
C; pins 2 and 4 externally connected to ground; unless otherwise specified
PARAMETER
CONDITIONS
SYMBOL
MIN.
TYP.
MAX.
UNIT
Supply
Supply voltage (pin 9)
note 1
V
P
= V
9-4
10
-
40
V
Supply voltage (pin 6)
note 1
V
6-4
-
-
60
V
Total supply current
(pin 6 and pin 9)
note 2
I
P
= I
6
+
I
9
34
50
85
mA
Quiescent current (pin 4)
see Fig.3
I
4
25
40
65
mA
Variation of quiescent current
with temperature
I
4
-
-
0.04
-
mA/K
Output current
Output current (pin 5)
(peak-to-peak value)
I
5(p-p)
-
1.2
1.5
A
Output current flyback generator
(pin 8)
-
I
8
-
0.7
0.85
A
Output current flyback generator
(pin 8)
I
8
-
0.6
0.75
A
Output voltage
Peak voltage during flyback
V
5-4M
-
-
60
V
Saturation voltage to supply
at
-
I
5
= 0.75 A
V
6-5sat
-
2.5
3.0
V
at I
5
= 0.75 A
note 3
V
5-6sat
-
2.5
3.0
V
at
-
I
5
= 0.60 A
V
6-5sat
-
2.2
2.7
V
at I
5
= 0.60 A
note 3
V
5-6sat
-
2.3
2.8
V
Saturation voltage to ground
at I
5
= 0.75 A
V
5-4sat
-
2.3
2.7
V
at I
5
= 0.60 A
V
5-4sat
-
2.1
2.4
V
Flyback generator
Saturation voltage
at
-
I
8
= 0.85 A
V
9-8sat
-
1.6
2.1
V
at I
8
= 0.75 A
note 3
V
8-9sat
-
2.3
2.8
V
at
-
I
8
= 0.70 A
V
9-8sat
-
1.4
1.9
V
at I
8
= 0.60 A
note 3
V
8-9sat
-
2.2
2.7
V
Flyback generator active if:
V
5-9
4.0
-
-
V
Leakage current at pin 8
-
I
8
-
5.0
100
A
Input
Input current (pin 1)
I
5
= 0.75 A
I
1
-
0.33
0.55
mA
Input voltage during scan (pin 1)
I
5
= 0.75 A
V
1-2
-
1.5
2.4
V
Input voltage during scan (pin 3)
pins 1 and 3 not connected
V
3-2
0.8
-
V
P
V
March 1991
7
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
Notes to the characteristics
1. The maximum supply voltage should be chosen such that during flyback the voltage at pin 5 does not exceed 60 V.
2. When V
5-4
= 13 V and no load at pin 5.
3. Duty factor maximum 3.3%.
4. Guard circuit is active.
5. During normal operation the voltage V
8-2
may not be lower than 2.5 V.
6. R
load
= 8
; I
load(rms)
= 125 mA.
7. With 220 pF between pins 1 and 5.
Input current during scan (pin 3)
pins 1 and 3 not connected
I
3
0.03
-
-
mA
pins 1 and 3 connected
I
3
-
-
0.21
mA
Input resistance (pin 3)
R
3
3.9
5.3
6.7
k
Input voltage during flyback (pin 1)
V
1-2
-
-
250
mV
Input voltage during flyback (pin 3)
V
3-2
-
-
250
mV
Guard circuit
Output voltage (pin 7)
note 4
loaded with 100 k
V
7-2
4.4
5.1
5.8
V
loaded with 0.5 mA
V
7-2
3.6
4.4
5.3
V
Internal series resistance of pin 7
R
i7
0.95
1.35
1.7
k
Guard circuit active if
V
8-2
is lower than
note 5
V
8-2
-
-
1.8
V
General data
Thermal protection becomes active
if junction temperature exceeds
T
j
158
175
192
C
Thermal resistance junction
to mounting base
R
th j-mb
-
10
12
K/W
Open loop gain at 1 kHz
note 6
G
oI
-
42
-
dB
Frequency response (
-
3 dB)
note 7
f
-
40
-
kHz
PARAMETER
CONDITIONS
SYMBOL
MIN.
TYP.
MAX.
UNIT
March 1991
8
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
APPLICATION INFORMATION
Fig.4
Typical application circuit diagram of the TDA3653B/C (vertical output), when used in combination with
the TDA2578A (see Fig.5).
Note to deflection coils AT1236/20: L = 29 mH, R = 13.6
; deflection current without overscan is 0.82 A peak-to-peak and EHT voltage is 25 kV.
March 1991
9
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
Fig.5 Typical application circuit diagram; for combination of the TDA2578A with the TDA3653B/C (see Fig.4).
March 1991
10
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
Fig.6 Application circuit diagram for combination with TDA2579A for 90
picture tube.
(1)
Dependent on PCB layout.
March 1991
11
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
PACKAGE OUTLINES
UNIT
A
A
max.
2
A
3
b
1
D
1
b
2
b
c
D
(1)
E
(1)
Z
max.
(1)
e
L
P
P
1
q
1
q
2
q
REFERENCES
OUTLINE
VERSION
EUROPEAN
PROJECTION
ISSUE DATE
IEC
JEDEC
EIAJ
mm
18.5
17.8
3.7
8.7
8.0
A
4
15.8
15.4
1.40
1.14
0.67
0.50
1.40
1.14
0.48
0.38
21.8
21.4
21.4
20.7
6.48
6.20
3.4
3.2
2.54
1.0
5.9
5.7
4.4
4.2
3.9
3.4
15.1
14.9
Q
1.75
1.55
DIMENSIONS (mm are the original dimensions)
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
2.75
2.50
SOT110-1
92-11-17
95-02-25
0
5
10 mm
scale
0.25
w
D
E
A
A
c
A
2
3
A
4
q
1
q
2
L
Q
w
M
b
b
1
b
2
D
1
P
q
1
Z
e
1
9
P
seating plane
pin 1 index
SIL9MPF: plastic single in-line medium power package with fin; 9 leads
SOT110-1
March 1991
12
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
UNIT
A
b
max.
b
p
2
c
D
(1)
E
(1)
Z
(1)
d
e
D
h
L
j
REFERENCES
OUTLINE
VERSION
EUROPEAN
PROJECTION
ISSUE DATE
IEC
JEDEC
EIAJ
mm
4.6
4.2
1.1
0.75
0.60
0.48
0.38
24.0
23.6
20.0
19.6
10
2.54
12.2
11.8
3.4
3.1
A
max.
1
2.0
E
h
6
2.00
1.45
2.1
1.8
DIMENSIONS (mm are the original dimensions)
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
17.2
16.5
SOT131-2
92-11-17
95-03-11
0
5
10 mm
scale
Q
0.25
w
0.03
x
D
L
A
E
c
A 2
Q
w
M
b
p
d
D
Z
e
x
h
1
9
Eh
non-concave
seating plane
1
b
j
SIL9P: plastic single in-line power package; 9 leads
SOT131-2
view B: mounting base side
B
March 1991
13
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90)
TDA3653B
TDA3653C
SOLDERING
Introduction
There is no soldering method that is ideal for all IC
packages. Wave soldering is often preferred when
through-hole and surface mounted components are mixed
on one printed-circuit board. However, wave soldering is
not always suitable for surface mounted ICs, or for
printed-circuits with high population densities. In these
situations reflow soldering is often used.
This text gives a very brief insight to a complex technology.
A more in-depth account of soldering ICs can be found in
our
"IC Package Databook" (order code 9398 652 90011).
Soldering by dipping or by wave
The maximum permissible temperature of the solder is
260
C; solder at this temperature must not be in contact
with the joint for more than 5 seconds. The total contact
time of successive solder waves must not exceed
5 seconds.
The device may be mounted up to the seating plane, but
the temperature of the plastic body must not exceed the
specified maximum storage temperature (T
stg max
). If the
printed-circuit board has been pre-heated, forced cooling
may be necessary immediately after soldering to keep the
temperature within the permissible limit.
Repairing soldered joints
Apply a low voltage soldering iron (less than 24 V) to the
lead(s) of the package, below the seating plane or not
more than 2 mm above it. If the temperature of the
soldering iron bit is less than 300
C it may remain in
contact for up to 10 seconds. If the bit temperature is
between 300 and 400
C, contact may be up to 5 seconds.
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification
This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
PDF 
ZIP