Rev. 4.00, 05/03, page iv of xl
Cautions
Keep safety first in your circuit designs!
1.
Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but
there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire
or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i)
placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or
mishap.
Notes regarding these materials
1.
These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation
product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any
other rights, belonging to Renesas Technology Corporation or a third party.
2.
Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in
these materials.
3.
All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents
information on products at the time of publication of these materials, and are subject to change by Renesas Technology
Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact
Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these
inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corporation by various means, including the
Renesas Technology Corporation Semiconductor home page (http://www.renesas.com).
4.
When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of
the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other
loss resulting from the information contained herein.
5.
Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used
under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an
authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for
any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea
repeater use.
6.
The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these
materials.
7.
If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license
from the Japanese government and cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is
prohibited.
8.
Please contact Renesas Technology Corporation for further details on these materials or the products contained therein.
Rev. 4.00, 05/03, page v of xl
Preface
The H8/38024 Group is a single-chip microcomputer built around the high-speed H8/300L CPU
and equipped with peripheral system functions on-chip. The H8/38024 Group incorporates
peripheral functions including ROM, RAM, timer, serial communications interface (SCI), 10-bit
PWM, A/D converter, LCD controller/driver, and I/O ports. It is a microcomputer allowing the
implementation of a sophisticated control system. Versions are available with types of internal
ROM: flash memory (F-ZTATTM*
1
) and PROM (ZTATTM*
2
). This makes it possible to design
application products with a great deal of specification fluidity, and allows for rapid and flexible
response to contingencies arising between the initial stages of production and full-scale
production.
Notes: *1 F-ZTATTM is a trademark of Renesas Technology Corp.
*2 ZTATTM is a trademark of Renesas Technology Corp.
Target Readers: This manual is designed for use by people who design application systems using
the H8/38024 Group, H8/38024S Group, and H8/38024F-ZTAT.
To use this manual, basic knowledge of electric circuits, logic circuits and microcomputers is
required.
Purpose: This manual provides the information of the hardware functions and electrical
characteristics of the
H8/38024 Group, H8/38024S Group, and H8/38024F-ZTAT.
The H8/300L Series Programming Manual contains detailed information of executable
instructions. Please read the Programming Manual together with this manual.
How to Use the Book:
To understand general functions
Read the manual from the beginning.
The manual explains the CPU, system control functions, peripheral functions and electrical
characteristics in that order.
To understanding CPU functions
Refer to the separate H8/300L Series Programming Manual.
Explanatory Note:
Bit sequence: upper bit at left, and lower bit at right
List of Related Documents: The latest documents are available on our Web site. Please make
sure that you have the latest version.
(http://www.renesas.com/)
PDF 
ZIP
