LC86P5420
No.6730-1/22
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
LC86P5420
13001 RM (IM) FS
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
CMOS IC
Ver. 2.00
31395
8-Bit Single Chip Microcontroller
with the One-Time Programmable PROM
Preliminary
Ordering number : ENN*6730
Overview
The LC86P5420 is a CMOS 8-bit single chip microcontroller with one-time PROM for the LC865500 / LC865400
series.
This microcontroller has the function and the pin description of the LC865500 / LC865400 series mask ROM
version, and the 20K-byte PROM.
Features
(1) Option switching by PROM data
The option function of the LC865400 series can be specified by the PROM data.
The LC86P5420 can be checked the functions of the trial pieces using the mass production board.
(2) Internal one-time PROM capacity
: 20736 bytes
(3) Internal RAM capacity
: 512 bytes
Mask ROM version
PROM capacity
RAM capacity
LC865520
20480 bytes
512 bytes
LC865516
16384 bytes
512 bytes
LC865512
12288 bytes
512 bytes
LC865508
8192 bytes
512 bytes
LC865504
4096 bytes
512 bytes
LC865412
12288 bytes
224 bytes
LC865408
8192 bytes
224 bytes
LC865404
4096 bytes
224 bytes
(4) Operating supply voltage
: 4.5V to 6.0V
(5) Instruction cycle time
: 1.0
s to 366
s
(6) Operating temperature
: -30
C to +70
C
(7) The pin and the package compatible with the LC865400 series mask ROM devices
(8) Applicable mask ROM version
: LC865520 / LC865516 / LC865512 / LC865508 / LC865504
LC865412 / LC865408 / LC865404
(9) Factory shipment
: DIP42S, QFP48E
LC86P5420
No.6730-2/22
Notice for use
The LC86P5420 is provided for the first release and small shipping of the LC865500 / LC865400 series.
At using, take notice of the followings.
(1) A point of difference the LC86P5420 and the LC865500 / LC865400 series
Item
LC86P5420
LC865520 / 16 / 12 / 08 / 04 LC865412 / 08 / 04
Operation after reset
The option is specified by degrees
The program is executed from 00H of the
releasing
until 3ms after going to a 'H' level
program counter immediately after going
to the reset terminal. The program
to a 'H' level to the reset terminal.
is executed from 00H of the
program counter.
Operating supply
4.5V to 6.0V
2.5V to 6.0V
voltage range (VDD)
Power dissipation
Refer to 'electrical characteristics' on the semiconductor news.
The LC86P5420 functions same as the followings while resetting ; LC865520 / 16 / 12 / 08 / 04, LC865412
/ 08 / 04.
The LC86P5420 uses 256 bytes that is addressed on 7F00H to 7FFFH in the program memory as the
option configulation data area.
A kind of the option corresopnding of the LC86P5420
A kind of option
Pins, Circuits
Contents of the option
Input / output form of
Port 0
1. N-channel open drain output
input / output ports
2. CMOS output
*1
1. Pull-up MOS Tr. provided
2. Pull-up MOS Tr. not provided
*2
Port 1
1. Input
: Programmable pull-up MOS Tr.
Output
: N-channel open drain
2. Input
: Programmable pull-up MOS Tr.
*1
Output
: CMOS
Port 3
1. Input
: No Programmable pull-up
MOS Tr.
Output
: N-channel open drain
2. Input
: Programmable pull-up MOS Tr.
*1
Output
: CMOS
*1) Specified in bit
*2) Specified in nibble unit. Pull-up MOS Tr. is not provided in N-channel open drain output port.
(2) Option
The option data is created by the option specified program "SU86K.EXE". The created option data is
linked to the program area by the linkage loader "L86K.EXE".
LC86P5420
No.6730-3/22
(3) ROM space
The LC86P5420 and LC865500 / LC865400 series use 256 bytes that is addressed on 7F00H to
7FFFH in the program memory as the option specified data area. These program memory capacity are
20480 bytes that is addressed on 0000H to 4FFFH.
(4) Ordering information
1. When ordering the identical mask ROM and PROM devices simultaneously.
Provide an EPROM containing the target memory contents together with the separate order forms for
each of the mask ROM and PROM versions.
2. When ordering a PROM device.
Provide an EPROM containing the target memory contents together with an order form.
How to use
(1) Create a programming data for LC86P5420
Programming data for EPROM of the LC86P5420 is required.
Debugged evaluation file (EVA file) must be converted to an INTEL-HEX formatted file (HEX file) with file
converter program, EVA2HEX.EXE. The HEX file is used as the programming data for the LC86P5420.
(2) How to program for the EPROM
The LC86P5420 can be programmed by the EPROM programmer with attachment ; W86EP5420D,
W86EP5420Q.
Recommended EPROM programmer
Productor
EPROM programmer
Advantest
R4945, R4944, R4943
Andou
AF-9704
AVAL
PKW-1100, PKW-3000
Minato electronics
MODEL1890A
"27512 (Vpp=12.5V) Intel high speed programming" mode available. The address must be set to
"0000H to 7FFFH" and a jumper (DASEC) must be set to 'OFF' at programming.
LC865520
6FFFH
7FFFH
7F00H
5FFFH
4FFFH
3FFFH
2FFFH
1FFFH
0FFFH
0000H
Option Data
area 256 bytes
Program Area
20K bytes
LC865516
Option Data Area
Option Data Area
Option Data Area
Option Data Area
Program Area
16K bytes
LC865512
LC865412
Program Area
12K bytes
LC865508
LC865408
Program Area
08K bytes
LC865504
LC865404
Program Area
04K bytes
LC86P5420
No.6730-4/22
W86EP5420D
W86EP5420Q
(3) How to use the data security function
"Data security" is the disabled function to read the data of the EPROM.
The following is the process in order to execute the data security.
1. Set 'ON' the jumper of attachment.
2. Program again. Then the EPROM programmer displays the error. The error means normally
activity of the data security. It is not a trouble of the EPROM programmer or the LSI.
Notes
Data security is not executed when the data of all address have 'FFH' at the sequence 2 above.
The programming by a sequential operation "BLANK=>PROGRAM=>VERIFY" cannot be executed
data security at the sequence 2 above.
Set 'OFF' to the jumper after executing the data security.
Data security
Not data security
Data security
Not data security
LC86P5420
No.6730-5/22
Pin Assignment
DIP42S
Package Dimension
(unit : mm)
3025B
SANYO : DIP-42S(600mil)
1.15
0.51min
3.8
4.25
0.25
5.1max
1.78
0.48
0.95
37.9
15.24
13.8
1
42
21
22
ILC00019
P17/PWM0
P16/BUZ
P15/SCK1
P14/S11/SB1
P13/SO1
P12/SCK0
P11/SI0/SB0
P10/SO0
P36
P35
P34
P33
P32
P31
P30
P73/INT3/T0IN
P72/INT2/T0IN
P71/INT1
P87/AN7
P86/AN6
P85/AN5
P00
P01
P02
P03
P04
P05
P06
P07
P70/INT0
XT2/P75
VSS
CF1
CF2
VDD
P80/AN0
P81/AN1
P82/AN2
P83/AN3
P84/AN4
XT1/P74
RES
1
3
5
2
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
26
25
27
29
28
30
31
32
33
34
35
36
37
38
39
40
41
42
PDF 
ZIP