ChipFind - документация

Электронный компонент: S424GH

Скачать:  PDF   ZIP
221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - http://www.sensitron.com
E-Mail Address - sales@sensitron.com
SENSITRON
SEMICONDUCTOR


TECHNICAL DATA
DATA SHEET 4293, REV. C
THREE PHASE FULL WAVE
RECTIFIER
ASSEMBLY
DESCRIPTION: 600 VOLT, 25 AMP, 5000 NS 3-PHASE FULL WAVE RECTIFIER ASSEMBLY.
FEATURE: A Dielectric Withstanding Voltage test will be performed with the metal case of the assembly
connected to ground and all four terminals connected to the high potential side of a DC power supply or
scope display test. Voltage applied shall be 2800 Vdc and held for 10 seconds.

MAX RATINGS/ELECTRICAL CHARACTRISTICS
ALL RATINGS ARE AT T
C
= 25 C UNLESS OTHERWISE SPECIFIED
RATING
SYMBOL
MAX.
UNITS
PEAK INVERSE VOLTAGE (PER LEG)
PIV
600
Volts
MAXIMUM FORWARD VOLTAGE DROP (PER LEG) (I
f
= 39 Adc)
I
f
@300
sec pulse, duty cycle<2%
V
f
1.2
Volts
MAXIMUM DC OUTPUT CURRENT (T
C
= 55
O
C)
(T
C
= 100
O
C)
I
O
25
18.5
Amps
Amps
PEAK SINGLE CYCLE SURGE CURRENT t
p
=8.3 ms Single Half Cycle Sine
Wave, Superimposed On Rated Load
I
FSM
150
Amps
MAXIMUM REVERSE RECOVERY TIME
(I
f
= 0.5A, I
r
= 1.0A, t
rr
measure
@ 0.25A)
t
rr
5000 ns
MAXIMUM REVERSE CURRENT I
r
@ PIV (PER LEG) (T
C
= 25
O
C)
T
C
= 100
O
C)
I
r
1.0
200
A
A
MAXIMUM THERMAL RESISTANCE (PER LEG)
R
JC
1.5
C/W
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
T
J, stg
-55
to
+ 150
C
S424GH
221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - http://www.sensitron.com
E-Mail Address - sales@sensitron.com

SENSITRON
TECHNICAL DATA
DATA SHEET 4293, REV. C




MECHANICAL DIMENSIONS: In Inches / mm
AC AC AC
+
.770
.730
(19.56
18.54)
.395
.355
(10.03
9.02)
.395
.355
(10.03
9.02)
.395
.355
(10.03
9.02)
.395
.355
(10.03
9.02)
.270
.230
(6.86)
5.84)
1.53
1.47
(38.86
37.34)
+
AC
AC
AC
.395
.355
(10.03
9.02)
.82 Max.
(20.83)
.59
.39
(12.95
9.91)
.15
.09
(3.81
2.29)
2.28
2.22
(57.91
56.39)
1.90
1.84
(48.26
46.74)
.208
.168
(5.28
4.27)
.320 Max
(8.13)
.189
.149
(4.80
3.78)
Dia (2 Places)
.125
.100
(3.18
2.54)
.030
.015
(.76
.38)
.151
.141
(3.84
3.58)
.118
.108
(3.00
2.74)
*Case--black anodized. Potting surface--uncontrolled



S424GH
Fig. 424
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users'
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a
value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations