P
RODUCT
S
PECIFICATIONS
Liquid Crystal Displays Group
LQ283G1TW11
TFT-LCD Module
Spec. Issue Date:
July 1
,
2005
No: LD-13612D
RECORDS OF REVISION
LQ283G1TW11
SPEC No.
DATE
REVISED
SUMMARY NOTE
No.
PAGE
LD-13612 June.25.2001 -
-
-
1st
Issue
Correction : CN3 Mating connecter
5
Modification :Notes3An outline figure
11
Addition : 7. DE (TH,TV) maximum value
LD-13612A July.27.2001 1
14 Correction
:Notes5measurement point
2
Addition : Mass value
3,4 Correction : CN1 CN2 Pin assign
Addition : 6-1 Consumption value
6-2 Consumption value
9
6-3 Adjusted voltage
Change : 9. Contrast ratio 350 400
13
Addition : 9.Luminance of white Min. value
14 Addition
:Note4Adjustment circuit
15
Addition : Gross weight for 1 set
LD-13612C Sep.20.2001 2
19
Change : Fig.1 Projection form
1 Delete: Deletion of usage
11 Addition: Vertical period Min. 60Hz
15 Change: 11. Shipping condition
19 Addition: Detailed CN4 drawing.
LD-13612D May.11.2005 3
Detailed front bezel drawing.
20
Change: Packing form
LD-13612D-
1
1. Application
3
This specification applies to the color 28.3 QSXGA TFT-LCD module LQ283G1TW11.
These specification sheets are the proprietary product of SHARP CORPORATION("SHARP") and include
materials protected under the copyright of SHARP. Do not reproduce or cause any third party to reproduce
them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the
express written permission of SHARP.
In case of using the device for applications such as control and safety equipment for transportation(aircraft,
trains, automobiles, etc. ), rescue and security equipment and various safety related equipment which require
higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and
redundant system design should be taken.
Do not use the device for equipment that requires an extremely high level of reliability, such as medical
equipment for life support.
SHARP assumes no responsibility for any damage resulting from the use of the device which does not comply
with the instructions and the precautions specified in these specification sheets.
Contact and consult with a SHARP sales representative for any questions about this device.
LD-13612D-
2
2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film
Transistor). The wide vision can be realized in this module with SHARP original technology. It is composed of
a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a back light unit. Graphics and texts
can be displayed on a 256032048 dots panel with about 16.77 million colors (8 bit) by supplying 192 bit data
signals(8bit2pixelRGB4), one display enable signal, and one dot clock signal by TMDS, and +12V DC
supply voltages for TFT-LCD panel driving and back light. The backlight inverter is built into this module.
3. Mechanical Specifications
Parameter Specifications
Unit
Display size
71.8 (Diagonal)
cm
28.3 (Diagonal)
Inch
Active area
560.64 (H)448.512
(V) mm
Pixel format
2560 (H)2048 (V)
Pixel
(1 pixelRGB dots)
Pixel pitch
0.219 (H)0.219 (V)
mm
Pixel configuration
R,G,B vertical stripe
Display mode
Normally Black
Unit outline dimensions *1
640 (W)530 (H)60(D) mm
Mass
15 max
kg
2
Surface treatment
Anti-glare and hard-coating 2H
*1.Note: excluding back light cables.
The thickness of module (D) doesn't contain the projection.
Outline dimensions are shown in Fig.1.
PDF 
ZIP