SMSC DS USB97CFDC
Rev. 12/15/2000
USB97CFDC
USB Floppy Disk Controller
FEATURES
3.3 Volt, Low Power Operation
Complete USB Specification 1.1 Compatibility
-
Includes USB Transceiver
-
Based on an Enhanced Version of SMSC's
Industry Proven USB97C100 USB Controller
Complete System Solution Including USB Mass
Storage Class Compliant Win98/2000 Driver and
Firmware
-
Supports 640K, 720K, 1.44M, 1.2M Windows 98
J, and 1.2M NEC DOS 6.x Formats
-
Supports Both the UFI and SFF8070i Command
Sets
-
Supports USB Mass Storage Compliant
Bootable Floppy BIOS
-
4ms Seek Times
-
USB 1.1 Compliance, Including Low Power
Device Class SUSPEND Mode Operation and
Power Control of Disk Drive
-
Disk Drive Feedback of Readiness Upon Power
Re-Application Option
-
Option for Ultra High Performance Using
Additional Caching SRAM
-
Support for Floppy Drive Power Control
Contains SMSC's Industry Proven Floppy Disk
Controller
-
Licensed CMOS 765B Floppy Disk Controller
-
Supports Single Normal or Three Mode Floppy
Drives
-
Supports Vertical Recording Format and High
Capacity Drives in User Written Firmware
Applications
-
Detects All Overrun and Underrun Conditions
-
Sophisticated Power Control Circuitry (PCC)
Including Multiple Powerdown Modes for
Reduced Power Consumption
Enhanced Digital Data Separator
-
1 Mbps, 500 Kbps, 300 Kbps, 250 Kbps Data
Rates
-
Programmable Precompensation Modes
Intelligent Auto Power Management
-
<300A SUSPEND Current
-
<75mA Operating Current
External Program Memory Interface
-
32K Byte Code Space (Supplied Firmware
Requires 16KB Memory)
-
Flash, SRAM, or EPROM Memory
4KB Internal Buffer SRAM for High Performance
Operation
Optional External Cache Memory
-
Up to 16K x 8 External SRAM may be Used for
Custom Tape/ Drive Applications
Integrated 14.318 MHz Crystal Driver Circuit
100 pin TQFP package (12.0 x 12.0 mm footprint)
-
25% smaller body size than other 100 pin TQFP
packages
ORDERING INFORMATION
Order Number: USB97CFDC-MN
100 Pin TQFP Package
SMSC DS USB97CFDC
Page 2
Rev. 12/15/2000
STANDARD MICROSYSTEMS CORPORATION (SMSC) 2000
80 Arkay Drive
Hauppauge, NY 11788
(631) 435-6000
FAX (631) 273-3123
Standard Microsystems is a registered trademark of Standard Microsystems Corporation, and SMSC is a trademark of Standard Microsystems
Corporation. Product names and company names are the trademarks of their respective holders. Circuit diagrams utilizing SMSC products are included
as a means of illustrating typical applications; consequently complete information sufficient for construction purposes is not necessarily given. Although
the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make
changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the semiconductor devices described any
licenses under the patent rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most
recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product
may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly
sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application
where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an
Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well
as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT, AND ANY AND ALL WARRANTIES
ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE.
IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES,
OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON
CONTRACT, TORT, NEGLIGENCE OF SMSC OR OTHERS, STRICT LIABILITY, BREACH OF WARRANTY, OR OTHERWISE; WHETHER OR NOT
ANY REMEDY IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE; AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
SMSC DS USB97CFDC
Page 3
Rev. 12/15/2000
GENERAL DESCRIPTION
The USB97CFDC is an integration of the USB97C102 Enhanced Multi-Endpoint USB Peripheral Controller, without
its integrated hub functions, and the SMSC Floppy Disk Controller used in many of its Super IO products, such as
the FDC37C869. Special care in the interconnection of the two devices has been taken to assure the lowest possible
system current draw (<300A) during SUSPEND mode operation.
Provisions for external Flash Memory up to 32K bytes for program storage is provided.
Although not required for standard floppy operation, provisions for 16K bytes of external buffer SRAM, in addition to
that included in the USB97C102 core, is also provided for extended applications, such as tape drives and for other
special applications.
Several pins are provided for controlling external power control elements and sensing specialized drive functions.
Note:
SMSC has developed and supplies firmware and drivers for this device to implement a standard three mode
or dual mode Floppy Disk Drive system with drive power control. If the customer desires to develop his own
firmware and/or drivers for this system, he may contact SMSC to obtain a complete engineering
specification which details all the internal block functions and register maps of the USB97CFDC to allow
custom programs to be written for this device.
SMSC DS USB97CFDC
Page 4
Rev. 12/15/2000
TABLE OF CONTENTS
GENERAL DESCRIPTION............................................................................................................................3
DESCRIPTION OF PIN FUNCTIONS...........................................................................................................5
PIN CONFIGURATION .................................................................................................................................6
BLOCK DIAGRAM........................................................................................................................................7
PIN DESCRIPTIONS.....................................................................................................................................7
BUFFER TYPE DESCRIPTIONS............................................................................................................10
BOARD TEST MODE OPERATION ...........................................................................................................10
DC PARAMETERS .....................................................................................................................................11
AC PARAMETERS......................................................................................................................................12
USB PARAMETERS ...................................................................................................................................15
USB DC PARAMETERS .........................................................................................................................15
USB AC PARAMETERS .........................................................................................................................16
MECHANICAL OUTLINE............................................................................................................................18
APPENDIX A:..............................................................................................................................................19
USB97CFDC TYPICAL APPLICATION ..................................................................................................19
SMSC PROVIDED SOFTWARE FOR USB97CFDC .............................................................................20
USB97CFDC REVISIONS...........................................................................................................................20
SMSC DS USB97CFDC
Page 5
Rev. 12/15/2000
DESCRIPTION OF PIN FUNCTIONS
FLOPPY DISK INTERFACE (14 Pins)
nTRK0
nINDEX
nWRTPRT
nDSKCHG
nRDATA
DRVDEN0
DRVDEN1
nSTEP
nWDATA
nWGATE
nHDSEL
nDIR
nDSO
nMTR0
USB INTERFACE (4 Pins)
USB+
USB-
AVDD
AGND
FLASH ROM INTERFACE (26 Pins)
FD0
FD1
FD2
FD3
FD4
FD5
FD6
FD7
FA0
FA1
FA2
FA3
FA4
FA5
FA6
FA7
FA8
FA9
FA10
FA11
FA12
FA13
FA14
FA15
nFRD
nFCE
SRAM/IO INTERFACE (24 Pins)
SD0
SD1
SD2
SD3
SD4
SD5
SD6
SD7
SA0
SA1
SA2
SA3
SA4
SA5
SA6
SA7
SA8
SA9
SA10
SA11
SA12
SA13
nMEMR
nMEMW
MISC (10 Pins)
nMEMEN
OPTEN
nDRVRDY
nFDPWR
XTAL1/CLKIN
XTAL2
nRESET
nTEST
TST_OUT
nTESTEN
POWER, GROUNDS, and NO CONNECTS (22 Pins)
PDF 
ZIP