ChipFind - документация

Электронный компонент: 71M6513H-1ELF

Скачать:  PDF   ZIP
Product Brief
71M6513
71M6513H
TDK Semiconductor's Power Meter ICs
Applications
Industrial Meters
Commercial Meters
Residential Meters
The TDK 71M6513 is a highly integrated SOC with an MCU core, RTC, FLASH and LCD driver.
TDK's Single Converter Technology
TM
with a 21bit 2nd order delta-sigma ADC, 6 analog inputs,
digital temperature compensation, precision voltage reference and 32 bit computation engine
supports a wide range of polyphase metering applications with very few low cost external com-
ponents. A 32kHz crystal timebase for the entire system and internal battery backup support for
RAM and RTC further reduce system cost.
Maximum design flexibility is supported with multiple UARTs, I
2
C, power fail comparator,
5V LCD charge pump, up to 22 DIO pins and in-system programmable FLASH which can be
updated with data or application code in operation. Easy conversion to ROM offers unprec-
edented cost structure for high volume applications. The device is offered in high (0.1%) and
low (0.5%) accuracy versions for multifunction residential/commercial meter applications
requiring multiple voltage/current inputs, larger LCD or DIO features.
A complete array of ICE and development tools, programming libraries and reference designs
enable rapid development and certification of meters that meet most demanding worldwide
electricity metering standards.
Features
< 0.1% WH accuracy over 2000:1 range (71M6513H version)
Exceeds IEC61036 / IEC62053 / ANSIC12.20
Voltage reference < 10ppm/C spec (71M6513H version)
Six sensor inputs-VDD referenced
Four quadrant metering
Voltage angles-phase sequence
Digital temperature compensation
21bit 2nd-order delta-sigma ADC
Independent 32bit compute engine
Low jitter pulse outputs
40-70Hz line frequency range

71M6513 / 71M6513H Block Diagram
Ordering Information
100-pin epLQFP, 0.5% accuracy
100-pin Lead-Free epLQFP, 0.5% accuracy
100-pin epLQFP, 0.1% accuracy
100-pin Lead-Free epLQFP, 0.1% accuracy
71M6513
71M6513
71M6513H
71M6513H
PART DESCRIPTION
71M6513-IEL
71M6513-IEL/F
71M6513H-IEL
71M6513H-IEL/F
ORDERING NUMBER
71M6513-IEL
71M6513-IEL
71M6513H-IEL
71M6513H-IEL
PACKAGE MARKING
For immediate technical information and the name of a local representative or distributor,
visit www.tdksemiconductor.com, send an e-mail to support@tdksemiconductor.com
or call (714) 508-8800.
No responsibility is assumed by TDK Semiconductor Corporation for use of this product nor for any infringements of patents and trademarks or
other rights of third parties resulting from its use. No license is granted under any patents, patent rights or trademarks of TDK Semiconductor
Corporation, and the company reserves the right to make changes in specifications at any time without notice. Accordingly, the reader is cau-
tioned to verify that the data sheet is current before placing orders.
2004 TDK Semiconductor Corporation 7/04 - rev 1.0
6440 Oak Canyon
Irvine, CA 92618-5201
714-508-8800 (Tel)
714-508-8878 (Fax)
Features
(continued)
Phase compensation (7)
Battery Backup for RAM and RTC
< 30mW @3.3V, 13.2mW back up
Flash memory option with security
8-bit microcontroller (8051)
Integrated ICE for MPU debug
LCD driver (<168 pixels)
High speed SSI serial output
RTC for time of use functions
Two Event counter/timers
Watchdog timer
Power fail monitor
Up to 22 general purpose I/O pins
64kB Flash/ROM
7kB RAM
Two UARTs for IR and AMR
Third software UART via DIO pins
100-lead Exposed Pad LQFP package
(epLQFP)