FEATURES
q
MICRO-SIZE, MINIATURE PACKAGES
Single: SOT-23-5, SO-8
Dual: MSOP-8, SO-8
Quad: SSOP-16
q
LOW OFFSET VOLTAGE: 750
V max
q
WIDE SUPPLY RANGE
Single Supply: +2.7V to +36V
Dual Supply:
1.35V to
18V
q
LOW QUIESCENT CURRENT: 350
A max
q
WIDE BANDWIDTH: 1.5MHz
DESCRIPTION
The OPA237 op amp family is one of Burr-Brown's
Micro
Amplifier
TM
series of miniature products. In addi-
tion to small size, these devices feature low offset
voltage, low quiescent current, low bias current, and a
wide supply range. Single, dual, and quad versions
have identical specifications for maximum design flex-
ibility. They are ideal for single supply, battery oper-
ated, and space-limited applications, such as PCMCIA
cards and other portable instruments.
OPA237 series op amps can operate from either single
or dual supplies. When operated from a single supply,
the input common-mode range extends below ground
and the output can swing to within 10mV of ground.
Dual and quad designs feature completely indepen-
dent circuitry for lowest crosstalk and freedom from
interaction.
Single, dual, and quad are offered in space-saving
surface-mount packages. The single version is available
in the ultra-miniature 5-lead SOT-23-5 and SO-8 sur-
face-mount. The dual version comes in a miniature
MSOP-8 and SO-8 surface-mount. The quad is avail-
able in an SSOP-16. The SSOP-16 has the same body
size as an SO-8 with 16 leads, while the MSOP-8 has the
same lead count as a SO-8 but half the size. The
SOT-23-5 is even smaller at one-fourth the size of an
SO-8. All are specified for 40
C to +85
C operation. A
macromodel is available for design analysis.
APPLICATIONS
q
BATTERY POWERED INSTRUMENTS
q
PORTABLE DEVICES
q
PCMCIA CARDS
q
MEDICAL INSTRUMENTS
q
TEST EQUIPMENT
OPA237
OPA2237
OPA4237
SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
Micro
Amplifier
TM
Series
International
Airport
Industrial
Park
Mailing
Address:
PO
Box
11400,
Tucson,
AZ
85734
Street
Address:
6730
S.
Tucson
Blvd.,
Tucson,
AZ
85706
Tel:
(520)
746-1111
Twx:
910-952-1111
Internet:
http://www.burr-brown.com/
FAXLine:
(800)
548-6133
(US/Canada
Only)
Cable:
BBRCORP
Telex:
066-6491
FAX:
(520)
889-1510
Immediate
Product
Info:
(800)
548-6132
1996 Burr-Brown Corporation
PDS-1327B
Printed in U.S.A. October, 1996
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
Out D
In D
+In D
V
+In C
In C
Out C
NC
Out A
In A
+In A
V+
+In B
In B
Out B
NC
OPA4237
SSOP-16
A
D
B
C
1
2
3
4
8
7
6
5
NC
V+
Output
NC
NC
In
+In
V
OPA237
SO-8
1
2
3
4
8
7
6
5
V+
Out B
In B
+In B
Out A
In A
+In A
V
OPA2237
SO-8, MSOP-8
A
B
1
2
3
5
4
V+
In
Out
V
+In
OPA237
SOT-23-5
SSOP-16
quad
SO-8
single/dual
MSOP dual
SOT-23-5
single
SBOS057
2
OPA237, 2237, 4237
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user's own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
SPECIFICATIONS: V
S
= +5V
At T
A
= +25
C, V
S
= +5V, R
L
= 10k
connected to V
S
/2, unless otherwise noted.
OPA237UA, NA
OPA2237UA, EA
OPA4237UA
PARAMETER
CONDITION
MIN
TYP
MAX
UNITS
OFFSET VOLTAGE
Input Offset Voltage
V
CM
= 2.5V
250
750
V
vs Temperature
(1)
Specified Temperature Range
2
5
V/
C
vs Power Supply (PSRR)
V
S
= +2.7V to +36V
10
30
V/V
Channel Separation (dual and quad)
0.5
V/V
INPUT BIAS CURRENT
Input Bias Current
(2)
V
CM
= 2.5V
10
40
nA
Input Offset Current
V
CM
= 2.5V
0.5
10
nA
NOISE
Input Voltage Noise, f = 0.1 to 10Hz
1
Vp-p
Input Voltage Noise Density, f = 1kHz
28
nV/
Hz
Current Noise Density, f = 1kHz
60
fA/
Hz
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
0.2
(V+) 1.5
V
Common-Mode Rejection
V
CM
= 0.2V to 3.5V
78
86
dB
INPUT IMPEDANCE
Differential
5 10
6
|| 4
|| pF
Common-Mode
5 10
9
|| 2
|| pF
OPEN-LOOP GAIN
Open-Loop Voltage Gain
V
O
= 0.5V to 4V
80
88
dB
FREQUENCY RESPONSE
Gain-Bandwidth Product
1.4
MHz
Slew Rate
G = 1
0.5
V/
s
Settling Time: 0.1%
G = 1, 3V Step, C
L
= 100pF
11
s
0.01%
G = 1, 3V Step, C
L
= 100pF
16
s
OUTPUT
Voltage Output, Positive
R
L
= 100k
to Ground
(V+) 1
(V+) 0.75
V
Negative
R
L
= 100k
to Ground
0.01
0.001
V
Positive
R
L
= 100k
to 2.5V
(V+) 1
(V+) 0.75
V
Negative
R
L
= 100k
to 2.5V
0.12
0.04
V
Positive
R
L
= 10k
to 2.5V
(V+) 1
(V+) 0.75
V
Negative
R
L
= 10k
to 2.5V
0.5
0.35
V
Short-Circuit Current
10/+4
mA
Capacitive Load Drive (stable operation)
See Typical Curves
POWER SUPPLY
Specified Operating Voltage
+5
V
Operating Range
+2.7
+36
V
Quiescent Current (per amplifier)
170
350
A
TEMPERATURE RANGE
Specified Range
40
+85
C
Operating Range
55
+125
C
Storage
55
+125
C
Thermal Resistance,
JA
5-Lead SOT-23-5
200
C/W
MSOP-8 Surface-Mount
150
C/W
SSOP-16 Surface-Mount
150
C/W
SO-8 Surface-Mount
150
C/W
NOTES: (1) Guaranteed by wafer-level test to 95% confidence. (2) Positive conventional current flows into the input terminals.
3
OPA237, 2237, 4237
SPECIFICATIONS: V
S
= +2.7V
At T
A
= +25
C, V
S
= +2.7V, R
L
= 10k
connected to V
S
/2, unless otherwise noted.
OPA237UA, NA
OPA2237UA, EA
OPA4237UA
PARAMETER
CONDITION
MIN
TYP
MAX
UNITS
OFFSET VOLTAGE
Input Offset Voltage
V
CM
= 1V
250
750
V
vs Temperature
(1)
Specified Temperature Range
2
5
V/
C
vs Power Supply (PSRR)
V
S
= +2.7V to +36V
10
30
V/V
Channel Separation (dual and quad)
0.5
V/V
INPUT BIAS CURRENT
Input Bias Current
(2)
V
CM
= 1V
10
40
nA
Input Offset Current
V
CM
= 1V
0.5
10
nA
NOISE
Input Voltage Noise, f = 0.1 to 10Hz
1
Vp-p
Input Voltage Noise Density, f = 1kHz
28
nV/
Hz
Current Noise Density, f = 1kHz
60
fA/
Hz
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
0.2
(V+) 1.5
V
Common-Mode Rejection
V
CM
= 0.2V to 1.2V
75
85
dB
INPUT IMPEDANCE
Differential
5 10
6
|| 4
|| pF
Common-Mode
5 10
9
|| 2
|| pF
OPEN-LOOP GAIN
Open-Loop Voltage Gain
V
O
= 0.5V to 1.7V
80
88
dB
FREQUENCY RESPONSE
Gain-Bandwidth Product
1.2
MHz
Slew Rate
G = 1
0.5
V/
s
Settling Time: 0.1%
G = 1, 1V Step, C
L
= 100pF
5
s
0.01%
G = 1, 1V Step, C
L
= 100pF
8
s
OUTPUT
Voltage Output, Positive
R
L
= 100k
to Ground
(V+) 1
(V+) 0.75
V
Negative
R
L
= 100k
to Ground
0.01
0.001
V
Positive
R
L
= 100k
to 1.35V
(V+) 1
(V+) 0.75
V
Negative
R
L
= 100k
to 1.35V
0.06
0.02
V
Positive
R
L
= 10k
to 1.35V
(V+) 1
(V+) 0.75
V
Negative
R
L
= 10k
to 1.35V
0.3
0.2
V
Short-Circuit Current
5/+3.5
mA
Capacitive Load Drive (stable operation)
See Typical Curves
POWER SUPPLY
Specified Operating Voltage
+2.7
V
Operating Range
+2.7
+36
V
Quiescent Current (per amplifier)
160
350
A
TEMPERATURE RANGE
Specified Range
40
+85
C
Operating Range
55
+125
C
Storage
55
+125
C
Thermal Resistance,
JA
5-Lead SOT-23-5
200
C/W
MSOP-8 Surface-Mount
150
C/W
SSOP-16 Surface-Mount
150
C/W
SO-8 Surface-Mount
150
C/W
NOTES: (1) Guaranteed by wafer-level test to 95% confidence. (2) Positive conventional current flows into the input terminals.
4
OPA237, 2237, 4237
SPECIFICATIONS: V
S
=
15V
At T
A
= +25
C, V
S
=
15V, R
L
= 10k
connected to V
S
/2, unless otherwise noted.
OPA237UA, NA
OPA2237UA, EA
OPA4237UA
PARAMETER
CONDITION
MIN
TYP
MAX
UNITS
OFFSET VOLTAGE
Input Offset Voltage
V
CM
= 0V
350
950
V
vs Temperature
(1)
Specified Temperature Range
2.5
7
V/
C
vs Power Supply (PSRR)
V
S
=
1.35V to
18V
10
30
V/V
Channel Separation (dual and quad)
0.5
V/V
INPUT BIAS CURRENT
Input Bias Current
(2)
V
CM
= 0V
8.5
40
nA
Input Offset Current
V
CM
= 0V
0.5
10
nA
NOISE
Input Voltage Noise, f = 0.1 to 10Hz
1
Vp-p
Input Voltage Noise Density, f = 1kHz
28
nV/
Hz
Current Noise Density, f = 1kHz
60
fA/
Hz
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
(V) 0.2
(V+) 1.5
V
Common-Mode Rejection
V
CM
= 15V to 13.5V
80
90
dB
INPUT IMPEDANCE
Differential
5 10
6
|| 4
|| pF
Common-Mode
5 10
9
|| 2
|| pF
OPEN-LOOP GAIN
Open-Loop Voltage Gain
V
O
= 14V to 13.8V
80
88
dB
FREQUENCY RESPONSE
Gain-Bandwidth Product
1.5
MHz
Slew Rate
G = 1
0.5
V/
s
Settling Time: 0.1%
G = 1, 10V Step, C
L
= 100pF
18
s
0.01%
G = 1, 10V Step, C
L
= 100pF
21
s
OUTPUT
Voltage Output, Positive
R
L
= 100k
(V+) 1.2
(V+) 0.9
V
Negative
R
L
= 100k
(V) +0.5
(V) +0.3
V
Positive
R
L
= 10k
(V+) 1.2
(V+) 0.9
V
Negative
R
L
= 10k
(V) +1
(V) +0.85
V
Short-Circuit Current
8/+4.5
mA
Capacitive Load Drive (stable operation)
See Typical Curves
POWER SUPPLY
Specified Operating Voltage
15
V
Operating Range
1.35
18
V
Quiescent Current (per amplifier)
200
475
A
TEMPERATURE RANGE
Specified Range
40
+85
C
Operating Range
55
+125
C
Storage
55
+125
C
Thermal Resistance,
JA
5-Lead SOT-23-5
200
C/W
MSOP-8 Surface-Mount
150
C/W
SSOP-16 Surface-Mount
150
C/W
SO-8 Surface-Mount
150
C/W
NOTES: (1) Guaranteed by wafer-level test to 95% confidence. (2) Positive conventional current flows into the input terminals.
5
OPA237, 2237, 4237
PACKAGE
DRAWING
TEMPERATURE
PACKAGE
ORDERING
PRODUCT
PACKAGE
NUMBER
(1)
RANGE
MARKING
NUMBER
(2)
Single
OPA237NA
5-Lead SOT-23-5
331
40
C to +85
C
A37A
OPA237NA-250
"
"
"
"
"
OPA237NA-3K
OPA237UA
SO-8 Surface-Mount
182
40
C to +85
C
OPA237UA
OPA237UA
Dual
OPA2237EA
MSOP-8 Surface-Mount
337
40
C to +85
C
B37A
OPA2237EA-250
"
"
"
"
"
OPA2237EA-2500
OPA2237UA
SO-8 Surface-Mount
182
40
C to +85
C
OPA2237UA
OPA2237UA
Quad
OPA4237UA
SSOP-16 Surface-Mount
322
40
C to +85
C
OPA4237UA
OPA4237UA-250
"
"
"
"
"
OPA4237UA-2500
NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book. (2) Models with -250, -2500, and
-3K are available only in Tape and Reel in the quantity indicated (e.g., -250 indicates 250 devices per reel). Ordering 3000 pieces of "OPA237NA-3K" will get a
single 3000 piece Tape and Reel. SO-8 models are available in tubes or Tape and Reel. For detailed Tape and Reel mechanical information, refer to
Appendix B of Burr-Brown IC Data Book.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
Supply Voltage, V+ to V ..................................................................... 36V
Input Voltage ....................................................... (V) 0.7V to (V+) +0.7V
Output Short-Circuit
(1) .......................................................................................
Continuous
Operating Temperature ................................................... 40
C to +125
C
Storage Temperature ...................................................... 55
C to +125
C
Junction Temperature .................................................................... +150
C
Lead Temperature (soldering, 10s) .................................................. 300
C
NOTE: (1) Short circuit to ground, one amplifier per package.
ABSOLUTE MAXIMUM RATINGS
PACKAGE/ORDERING INFORMATION
6
OPA237, 2237, 4237
INPUT BIAS CURRENT
vs INPUT COMMON-MODE VOLTAGE
12
11
10
9
8
7
6
Input Bias Current (nA)
Common-Mode Voltage (V)
15
10
5
0
5
10
15
V
S
= 15V
V
S
= +5V
V
S
= +2.7V
TYPICAL PERFORMANCE CURVES
At T
A
= +25
C and R
L
= 10k
,
unless otherwise noted.
POWER SUPPLY and COMMON-MODE REJECTION
vs FREQUENCY
120
100
80
60
40
20
0
PSR, CMR (dB)
Frequency (Hz)
10
100
1k
10k
100k
1M
10M
+PSR (V
S
= +5V, 15V)
CMR (V
S
= +2.7V, +5V or 15V)
+PSR
(V
S
= +2.7V)
PSR
(V
S
= 15V)
INPUT NOISE AND CURRENT NOISE
SPECTRAL DENSITY vs FREQUENCY
1
1k
100
10
Voltage Noise (nV/
Hz)
Current Noise (fA/
Hz)
Frequency (Hz)
10
100
1k
10k
100k
Current Noise
Voltage Noise
OPEN-LOOP GAIN/PHASE vs FREQUENCY
1
100
80
60
40
20
0
20
Voltage Gain (dB)
0
45
90
135
180
Phase ()
Frequency (Hz)
10
100
1k
10k
100k
1M
10M
C
L
= 100pF
V
S
= 15V
V
S
= +2.7V, +5V
G
CHANNEL SEPARATION vs FREQUENCY
Frequency (Hz)
Channel Separation (dB)
130
120
110
100
90
80
10
100
1k
10k
100k
Dual and quad devices.
G = 1, all channels.
Quad measured channel
A to D or B to C--other
combinations yield improved
rejection.
INPUT BIAS CURRENT vs TEMPERATURE
Temperature (C)
Input Bias Current (nA)
14
12
10
8
6
4
75
50
25
0
25
50
75
100
125
V
S
= +2.7V, +5V
V
S
= 15V
7
OPA237, 2237, 4237
TYPICAL PERFORMANCE CURVES
(CONT)
At T
A
= +25
C and R
L
= 10k
,
unless otherwise noted.
OFFSET VOLTAGE DRIFT
PRODUCTION DISTRIBUTION
Percent of Amplifiers (%)
Offset Voltage Drift (V/C)
0.5
1.5
2.5
3.5
4.5
5.5
6.5
7.5
8.5
9.5
10.5
11.5
30
25
20
15
10
5
0
0.2%
0.2%
V
S
= +2.7V
Typical production
distribution of packaged
units. Single, dual,
and quad units included.
OFFSET VOLTAGE DRIFT
PRODUCTION DISTRIBUTION
Percent of Amplifiers (%)
Offset Voltage Drift (V/C)
16
14
12
10
8
6
4
2
0
0.5
1.5
2
1
3
3.5
2.5
4
4.5
5
5.5
6
6.5
7
8
7.5
V
S
= +5V
0.4%
0.6%
0.2%
0.2%
Typical production
distribution of packaged
units. Single, dual,
and quad units included.
OFFSET VOLTAGE DRIFT
PRODUCTION DISTRIBUTION
Percent of Amplifiers (%)
Offset Voltage Drift (V/C)
12
10
8
6
4
2
0
0.5
1.5
2
1
3
3.5
2.5
4
4.5
5
5.5
6
6.5
7
8
7.5
V
S
= 15V
0.4%
0.4%
0.2%
Typical production
distribution of packaged
units. Single, dual,
and quad units included.
A
OL
, CMR, PSR vs TEMPERATURE
Temperature (C)
A
OL
, CMR, PSR (dB)
120
110
100
90
80
70
60
75
50
25
0
25
50
75
100
125
V
S
= +2.7V, +5V
V
S
= +2.7V, +5V
V
S
= +2.7V, +5V, 15V
V
S
= 15V
V
S
= 15V
CMR
AOL
PSR
OFFSET VOLTAGE
PRODUCTION DISTRIBUTION
Percent of Amplifiers (%)
Offset Voltage (V)
750
650
550
450
350
250
150
50
50
150
250
350
450
550
650
750
12.5
10
7.5
5
2.5
0
V
S
= +2.7V, +5V
0.2%
0.4%
0.7%
Typical production
distribution of packaged
units. Single, dual,
and quad units included.
OFFSET VOLTAGE
PRODUCTION DISTRIBUTION
Percent of Amplifiers (%)
Offset Voltage (V)
950
850
750
650
550
450
350
250
150
50
50
150
250
350
450
550
650
750
850
950
9
8
7
6
5
4
3
2
1
0
V
S
= 15V
0.1%
0.1%
Typical production
distribution of packaged
units. Single, dual,
and quad units included.
8
OPA237, 2237, 4237
70
60
50
40
30
20
10
0
10
100
1k
10k
Load Capacitance (pF)
Overshoot (%)
SMALL-SIGNAL OVERSHOOT
vs LOAD CAPACITANCE
G = +1, V
S
= +2.7V, +5V
G = +1, V
S
= 15V
G = 1, V
S
= +2.7V, +5V
G = 1, V
S
= 15V
G = 2, V
S
= +2.7V, +5V
G = 2, V
S
= 15V
G = 10, V
S
= +2.7V,
+5V, 15V
TYPICAL PERFORMANCE CURVES
(CONT)
At T
A
= +25
C and R
L
= 10k
,
unless otherwise noted.
LARGE-SIGNAL STEP RESPONSE
G = 1, C
L
= 100pF, V
S
= +5V
10
s/div
1V/div
SMALL-SIGNAL STEP RESPONSE
G = 1, C
L
= 100pF, V
S
= +5V
20mV/div
1
s/div
SMALL-SIGNAL STEP RESPONSE
G = 1, C
L
= 220pF, V
S
= +5V
20mV/div
2
s/div
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
V+
(V+) 0.5
(V+) 1
(V+) 1.5
(V+) 2
(V) +2
(V) +1.5
(V) +1
(V) +0.5
V
0
1
2
3
4
5
Output Current (mA)
Output Voltage Swing (V)
+125C
+25C
55C
+125C
+25C
+125C
55C
Sinking Current
Sourcing Current
SETTLING TIME vs GAIN
Gain (V/V)
Settling Time (s)
100
10
1
1
10
100
0.01%
0.1%
V
S
= +2.7V,
1V Step
V
S
= 15V,
10V Step
V
S
= +5V,
3V Step
9
OPA237, 2237, 4237
TYPICAL PERFORMANCE CURVES
(CONT)
At T
A
= +25
C and R
L
= 10k
,
unless otherwise noted.
MAXIMUM OUTPUT VOLTAGE
vs FREQUENCY
1M
100k
Frequency (Hz)
1k
10k
30
25
20
15
10
5
0
Output Voltage (Vp-p)
Maximum output voltage
without slew-rate induced
distortion
V
S
= 15V
V
S
= +5V
V
S
= +2.7V
QUIESCENT CURRENT vs TEMPERATURE
Temperature (C)
Quiescent Current (
A)
300
250
200
150
100
50
75
50
25
0
25
50
75
100
125
V
S
= +5V
V
S
= +2.7V
V
S
= 15V
SHORT-CIRCUIT CURRENT vs TEMPERATURE
Temperature (C)
Short-Circuit Current (mA)
12
10
8
6
4
2
0
75
50
25
0
25
50
I
SC
_
I
SC
+
75
100
125
V
S
= +2.7V
V
S
= +5V
V
S
= 15V
V
S
= +2.7V
V
S
= 15V
V
S
= +5V
10
OPA237, 2237, 4237
APPLICATIONS INFORMATION
OPA237 series op amps are unity-gain stable and suitable
for a wide range of general-purpose applications. Power
supply pins should be bypassed with 10nF ceramic capaci-
tors.
OPERATING VOLTAGE
OPA237 series op amps operate from single (+2.7V to
+36V) or dual (
1.35V to
18V) supplies with excellent
performance. Most behavior remains unchanged through-
out the full operating voltage range. Parameters which
vary significantly with operating voltage are shown in
typical performance curves. Specifications are production
tested with +2.7V, +5V, and
15V supplies.
OUTPUT CURRENT AND STABILITY
OPA237 series op amps can drive large capacitive loads.
However, under certain limited output conditions any op
amp may become unstable. Figure 1 shows the region
where the OPA237 has a potential for instability. These
load conditions are rarely encountered, especially for single
supply applications. For example, take the case when a
+5V supply with a 10k
load to V
S
/2 is used. OPA237
series op amps remain stable with capacitive loads up to
4,000pF, if sinking current and up to 10,000pF, if sourcing
current. Furthermore, in single supply applications where
the load is connected to ground, the op amp is only
sourcing current, and as shown in Figure 1, can drive
10,000pF with output currents up to 1.5mA.
FIGURE 1. Stability-Capacitive Load vs Output Current.
FIGURE 2. Low and High-Side Battery Current Sensing.
R
L
10
A1
OPA237
+
R
1
38.3k
R
3
38.3k
R
5
383k
R
6
10k
R
7
9.09k
R
4
20k
R
2
19.1k
A2
OPA237
R
8
100k
R
H
10
I
H
V+
V
V+
V
2.7V to 15V
V+ for A
1
, A
2
In
+In
In
+In
V
O
= 10 I
H
R
H
To Load
To Load
V
O
= 10 I
L
R
L
Common-mode range of A2
extends to V for low-side sensing.
Optional for I
B
Cancellation
(R
7
= R
6
II R
8
)
R
2
and R
4
divide down the
common-mode input to A1.
Low-Side
Current Sense
High-Side
Current Sense
Out
Out
NOTE: Low and high-side sensing circuits can be used independently.
V for A
1
, A
2
I
L
2
0.5
1
1.5
Output Current (mA)
2
1.5
1
0.5
0
100k
10k
1k
100
10
Capacitive Load (pF)
V
S
= +2.7V
V
S
= +5V, 15V
OPERATION NOT
RECOMMENDED
PACKAGING INFORMATION
ORDERABLE DEVICE
STATUS(1)
PACKAGE TYPE
PACKAGE DRAWING
PINS
PACKAGE QTY
OPA2237EA/250
ACTIVE
VSSOP
DGK
8
250
OPA2237EA/2K5
ACTIVE
VSSOP
DGK
8
2500
OPA2237UA
ACTIVE
SOIC
D
8
100
OPA2237UA/2K5
ACTIVE
SOIC
D
8
2500
OPA237NA/250
ACTIVE
SOP
DBV
5
250
OPA237NA/3K
ACTIVE
SOP
DBV
5
3000
OPA237UA
ACTIVE
SOIC
D
8
100
OPA237UA/2K5
ACTIVE
SOIC
D
8
2500
OPA4237UA/250
OBSOLETE
SSOP
DBQ
16
OPA4237UA/2K5
OBSOLETE
SSOP
DBQ
16
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
PACKAGE OPTION ADDENDUM
www.ti.com
3-Oct-2003
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI's terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright
2003, Texas Instruments Incorporated
PDF 
ZIP