SPECIFICATION
MPS-30-5
MPS-30-12
MPS-30-15
MPS-30-24
MPS-30-27
MPS-30-48
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
LINE REGULATION
LOAD REGULATION
SETUP, RISE, HOLD TIME
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY(Typ.)
INPUT
INRUSH CURRENT(max.)
LEAKAGE CURRENT
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
OVER LOAD
OVER VOLTAGE
OVER TEMPERATURE
AC CURRENT
5V
12V
15V
24V
27V
48V
5A
2.5A
2A
1.2A
1.1A
0.6A
0 ~ 5A
0 ~ 2.5A
0 ~ 2A
0 ~ 1.2A
0 ~ 1.1A
0 ~ 0.6A
25W
30W
30W
28.8W
29.7W
28.8W
80mVp-p
120mVp-p
150mVp-p
240mVp-p
240mVp-p
240mVp-p
3.0%
3.0%
3.0%
3.0%
3.0%
2.0%
1.0%
1.0%
0.5%
0.5%
0.5%
0.5%
2.0%
1.0%
1.0%
1.0%
1.0%
1.0%
88 ~ 264VAC auto switch
120 ~ 370VDC
47 ~ 63Hz
72%
75%
76%
77%
78%
78%
0.8A/115VAC
0.5A/230VAC
COLD START 35A/230VAC
<0.3mA / 264VAC
Above 105%
rated output power
5.5 ~ 6.75V
Tj 135
typically (U1) Detect on main control IC
13.2 ~ 16.2V
16.5 ~ 20.25V
26.4 ~ 32.4V
29.7 ~ 36.45V
52.8 ~ 64.8V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
Protection type : Shut down o/p voltage, re-power on to recover
-20 ~ +85
, 10 ~ 95% RH
0.03%/
(0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
547Khrs min.
MIL-HDBK-217F (25
)
101.6*65.8*23.5mm (L*W*H)
0.16Kg; 90pcs/15.8Kg/1.02CUFT
500ms, 30ms, 50ms/230VAC
500ms, 30ms, 10ms/115VAC at full load
-10 ~ +50
(Refer to output load derating curve)
20 ~ 90% RH non-condensing
SAFETY STANDARDS
HARMONIC CURRENT
EMS IMMUNITY
UL2601-1, TUV EN60601-1, IEC601-1 Approved
Compliance to EN55011 (CISPR11) Class B
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2 Medical level, criteria A
30W Single Output for Medical Type
M P S - 3 0
s e r i e s
Universal AC input / Full range
Low leakage current
0.3mA
Protections:Short circuit/Over load/Over voltage/Over temperature
Fixed switching frequency at 100KHz
Low cost
High reliability
3 years warranty
Features :
RIPPLE & NOISE (max.)
Note.2
VOLTAGE TOLERANCE
Note.3
EMI CONDUCTION & RADIATION
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:4KVAC
I/P-FG:1.5KVAC
O/P-FG:SHORT
I/P-O/P, I/P-FG:100M Ohms/500VDC
ENVIRONMENT
SAFETY &
EMC
(Note 4)
PROTECTION
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25
of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
TOTAL POWER INT'L
PDF 
ZIP