ChipFind - документация

Электронный компонент: P172ACCJJ

Скачать:  PDF   ZIP

Document Outline

P172-Type Receiver
Data Sheet
July 2003
The P172-Type PIN/Preamp and APD/Preamp receivers are avail-
able in a mini-DIL package (top) or a gull-wing package (bot-
tom).
Features
s
Low-profile, 8-lead mini-DIL or gull-wing style pack-
age:
-- Suitable for SONET/SDH applications
s
Metal package:
-- Offers superior shielding for high noise
immunity
s
Planar structure for high reliability
s
Operating wavelength range: 1.25
m--1.6
m
s
Available in 8
m core single-mode fiber or
62.5
m core multimode fiber pigtails
s
Wide operating temperature range:
-- APD/PIN, 40
C to +85
C
s
Qualified according to Telcordia Technologies
TM
GR-468-CORE
s
Typical sensitivity:
-- APD, 33 dBm
-- PIN, 24 dBm
s
Thermistor in all versions
Applications
s
Long-reach or metro SONET OC-48 and
SDH STM-16, or multidata-rate telecommunications
applications
s
SONET/SDH receivers and transponders
s
Line terminal equipment
Benefits
s
Compact size
s
Easily board mounted
riQ
T
ui
nt
SE
M
IC
O
ND
UC
TO
R
P1
72
-T
yp
e
Re
ce
iv
er
riQ
T
ui
nt
SE
M
IC
ON
DU
CT
OR
P1
72
2
2
For additional information and latest specifications, see our website: www.triquint.com
Data Sheet
P172-Type Receiver
July 2003
Description
The P172-type receiver consists of a PIN or APD cou-
pled to a single-mode or multimode fiber pigtail and a
linear preamplifier. Both the PIN and APD are rear-illu-
minated planar diode structures with a low-capacitance
active area for maximum responsivity and speed.
This device incorporates the new Laser 2000 manufac-
turing process from the Optoelectronics Products unit
of TriQuint Semiconductor. Laser 2000 is a low-cost
platform that targets high-volume manufacturing and
tight product distributions on all optical subassemblies.
This platform incorporates an advanced optical design
that is produced on TriQuint highly automated produc-
tion lines. The Laser 2000 platform is qualified for cen-
tral office and uncontrolled environments, and can be
used for applications requiring high performance and
low cost.
Figure 1. P172-Type Receiver (Top View)
* Logic high when light is on.
Logic low when light is on.
4
3
2
1
5
6
7
8
DATA
DATA
V
CC
THERMISTOR
GND
V
PD
GND
GND
Table 1. P172-Type PIN/Preamp and APD/Preamp
Pin Descriptions
Pin Number
Description
1
Photodiode Bias
2
Case Ground
3
DATA*
4
Case Ground
5
Thermistor
6
DATA
7
Case Ground
8
V
CC
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-
lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Parameter
Symbol
Min
Max
Unit
Positive Supply Voltage
V
CC
0.5
4.0
V
Optical Input Power:
APD
PIN
P
IN
P
IN
--
--
0
8.0
dBm
dBm
Operating Case Temperature Range:
APD/PIN
T
C
40
85
C
Storage Temperature Range
T
stg
40
85
C
Lead Soldering Temperature
--
--
250
C
Lead Soldering Time
--
--
10
s
For additional information and latest specifications, see our website: www.triquint.com
3
Data Sheet
July 2003
P172-Type Receiver
Electrical Characteristics
Minimum and maximum values specified over operating case temperature range and end of life (EOL), and typical
values are for 25
C and beginning of life (BOL), unless otherwise specified
* The value of V
OP
is stated on the receiver label.
The resistance of the thermistor is inversely proportional to the temperature. The temperature in degree-Kelvin can be calculated from the
resistance value using the Steinhart-Hart equation: 1/T
k
= A + B ln(R) + C [ ln(R) ]
3
, where R is the resistance, and A, B, and C are constants:
A = +1.0267 x 10
3
;
B = +2.565 x 10
4
;C = -4.5421 x 10
8
.
The temperature in degree-Celsius is T
c
= T
k
- 273.15.
.
Table 2. Electrical Characteristic
Parameter
Symbol
Min
Typ
Max
Unit
dc Power Supply Voltages:
Positive Supply
APD Operating Bias Voltage*
APD Operating Voltage Temperature Coefficient
PIN Operating Bias Voltage*
V
CC
V
OP*
--
V
OP*
3.15
45
0.07
3.0
3.3
--
--
5.0
3.45
70
0.14
15
V
V
V/
C
V
dc Power Supply Currents:
Positive Supply
APD Bias Supply at V
OP
PIN Bias Supply at V
OP
I
CC
I
APD
I
PIN
--
--
--
55
--
--
101
4
4
mA
mA
mA
dc Power Dissipation
P
DISS
--
200
350
mW
Small Signal (<10
A) Transimpedance
T
z
1.7
2.5
3.1
k
Input Noise Current (100 kHz--2 GHz)
N
rms
--
322
466
nArms
Output Return Loss (130 MHz--5 GHz)
S
22
--
15
9
dB
3 dB Bandwidth
f
C
1.7
2.0
--
GHz
Thermistor resistance at 25
C
R
TH
9.5
10
10.5
k
4
For additional information and latest specifications, see our website: www.triquint.com
Data Sheet
P172-Type Receiver
July 2003
Optical Characteristics
Minimum and maximum values specified over operating case temperature range and end of life (EOL), and typical
values are for 25
C and beginning of life (BOL), unless otherwise specified.
* The value of V
OP
is stated on the receiver label.
Sensitivity specifications are measured at transmitter beginning-of-life condition (12 dB extinction ratio). At transmitter end-of-life condition
(8.2 dB extinction ratio), 1 dB sensitivity degradation from BOL condition is expected.
Table 3. Optical Characteristics
Parameter
Symbol
Min
Typ
Max
Unit
Optical Wavelength for Rated Sensitivity
1.25
--
1.6
m
Responsivity (at 1310 nm, V
BIAS
= V
OP
):
APD at 30 dBm, 25
C
APD at 30 dBm, 40
C to +85
C
PIN at 20 dBm, 25
C
PIN at 20 dBm, 40
C to +85
C
R
9.0
8.6
0.81
0.70
--
--
--
--
--
--
--
--
A/W
A/W
A/W
A/W
Sensitivity (2.5 Gb/s, 2
23
1 PRBS, 1 x 10
10
BER,
1310 nm, V
BIAS
= V
OP
):*
,
APD Version:
At 25
C
At 40
C to +85
C
PIN Version:
At 25
C
At 40
C to +85
C
P
RMIN
--
--
--
--
33
32
24
23
32
31
23
22
dBm
dBm
dBm
dBm
Overload (2.5 Gb/s, 2
23
1 PRBS, 1 x 10
10
BER,
1550 nm, V
BIAS
= V
OP
):*
APD Version
PIN Version
P
RMAX
6
0
3
1
--
--
dBm
dBm
Optical Return Loss:
Single-mode Fiber
Multimode Fiber
--
--
--
--
--
--
27
14
dB
dB
For additional information and latest specifications, see our website: www.triquint.com
5
Data Sheet
July 2003
P172-Type Receiver
Outline Diagrams
P172-Type Through-Hole Package
Dimensions are in inches and (millimeters).
0.170
(4.32)
CONNECTOR
FIBER
0.900 m
BEND LIMITER
0.974
(24.74)
MIN.
0.016 (0.41) 8 PLACES
0.155
(3.94)
STANDOFF
0.010 (0.25) MAX
0.079
(2.01)
0.431
(10.95)
38.98 3.15 (990 80)
0.010
(0.25)
0.300
(7.62)
8 PLACES
0.100
(2.54)
MIN
0.315
(8.00)
4 3 2 1
5 6 7 8
0.045 (1.14)
NOSE GEOMETRY
0.565
(14.35)
0.144
(3.66)
0.010
(0.25)
0.194
(4.95)
LEAD TRIM
1-1057F
6
For additional information and latest specifications, see our website: www.triquint.com
Data Sheet
P172-Type Receiver
July 2003
Outline Diagrams
(continued)
P172-Type Gull-Wing Package
Dimensions are in inches and (millimeters).
0.170
(4.32)
0.315
(8.00)
4
3 2
1
5
6 7
8
0.045 (1.14)
NOSE GEOMETRY
CONNECTOR
FIBER
0.900 M
BEND LIMITER
0.974
(24.74)
MIN.
0.565
(14.35)
0.144
(3.66)
0.016 (0.41) 8 PLACES
0.155
(3.94)
STANDOFF
0.010(0.25) MAX
0.079
(2.01)
0.431
(10.95)
38.98 3.15 (990 80)
0.047
0.008
(1.19
0.20)
0.100
(2.54)
MIN
0.020
0.005
(0.51
0.13
)
0.010
(0.25)
0.194
(4.95)
1-1057F.a
For additional information and latest specifications, see our website: www.triquint.com
7
Data Sheet
July 2003
P172-Type Receiver
Qualification Information
The P172-type receiver has completed and passed the following qualification tests and meets the intent of Telcor-
dia Technologies
GR-468-CORE requirements.
Table 4. P172Type Qualification Information
Test
Reference
Conditions
Sample Size
Pass/Fail Criteria
Mechanical Shock
and Vibration
Telcordia Technologies
GR-468-CORE,
Section 8.3.2
500 g, 0.5 ms
Condition A, 20 g,
20 Hz to 2000 Hz,
4 min./cycle,
4 cycles
11
10% Responsivity
Change After Completion
of Both Tests
Thermal Shock
MIL-STD-883
Method 1011
0
C to 100
C,
20 cycles
11
Physical Attributes and
Leak Check
Lead Integrity
MIL-STD-883
Method 2004
Condition A
To Be Provided by
the Supplier
--
Solderability
MIL-STD-883
Method 2003
--
To Be Provided by
the Supplier
--
Low Temperature
Storage
--
40
C storage
2000 hours
11
10% Responsivity
Change After Completion
of Test
High Temperature
Storage
--
85
C storage
2000 hours
11
10% Responsivity
Change After Completion
of Test
Temperature
Cycling
Telcordia Technologies
GR-468-CORE,
Section 5.20
40
C to +85
C,
500 cycles
11
10% Responsivity
Change After Completion
of Test
Damp Heat
MIL-STD-883
Method 103
85
C/85% RH
1000 hours
11
10% Responsivity
Change After Completion
of Test
Cyclic Moisture
Resistance
Telcordia Technologies
GR-468-CORE,
Section 5.23
--
11
10% Responsivity
Change After Completion
of Test
ESD Threshold
Telcordia Technologies
GR-468-CORE,
Section 5.22
--
6
Telcordia Requirement
Internal Moisture
MIL-STD-883
Method 1018
--
11 Pieces After
Thermal Shock
Test
Max 5000 ppm Water
Vapor After Other Test
Cells
8
For additional information and latest specifications, see our website: www.triquint.com
Data Sheet
P172-Type Receiver
July 2003
Ordering Information
Table 5. P172-Type Receiver Ordering Information
Product Code
Detector Type
Connector type
Lead type
Fiber type
Comcode
P172ABCA
APD
SC/PC
Through Hole
SMF
108566076
P172ABCF
APD
FC/PC
Through Hole
SMF
108566084
P172ABCS
APD
LC
Through Hole
SMF
108898040
P172ABCJ
APD
MU
Thr
OUGH
Hole
SMF
109113209
P172ABCJJ
APD
MU-J
Through Hole
SMF
700053392
P172ACCA
APD
SC/PC
Gull Wing
SMF
109122325
P172ACCF
APD
FC/PC
Gull Wing
SMF
109122333
P172ACCS
APD
LC
Gull Wing
SMF
109122341
P172ACCJ
APD
MU
Gull Wing
SMF
109122358
P172ACCJJ
APD
MU-J
Gull Wing
SMF
700053393
P172PBCA
PIN
SC/PC
Through Hole
SMF
108566100
P172PBCF
PIN
FC/PC
Through Hole
SMF
108566118
P172PBCS
PIN
LC
Through Hole
SMF
108898057
P172PBCJ
PIN
MU
Through Hole
SMF
109113308
P172PBCJJ
PIN
MU-J
Through Hole
SMF
700053394
P172PCCA
PIN
SC/PC
Gull Wing
SMF
109112366
P172PCCF
PIN
FC/PC
Gull Wing
SMF
109122374
P172PCCS
PIN
LC
Gull Wing
SMF
109122382
P172PCCJ
PIN
MU
Gull Wing
SMF
109122390
P172PCCJJ
PIN
MU-J
Gull Wing
SMF
700053395
P172PBAA
PIN
SC/PC
Through Hole
MMF
109113266
P172PBAF
PIN
FC/PC
Through Hole
MMF
109113274
P172PBAS
PIN
LC
Through Hole
MMF
109113290
P172PBAJ
PIN
MU
Through Hole
MMF
109113282
P172PCAA
PIN
SC/PC
Gull Wing
MMF
109122283
P172PCAF
PIN
FC/PC
Gull Wing
MMF
109122291
P172PCAS
PIN
LC
Gull Wing
MMF
109122309
P172PCAJ
PIN
MU
Gull Wing
MMF
109122317
Table 6. Related Product Information
Product Code
Description
Document Number
R485
2.5 Gb/s Receiver with Clock Recovery
DS01-005-1
R480
2.5 Gb/s Receiver with CML Data Output
DS01-011-1
Additional Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint:
Web: www.triquint.com
Tel: (503) 615-9000
E-mail: info_opto@tqs.com
Fax: (503) 615-8902
For technical questions and additional information on specific applications:
E-mail: info_opto@tqs.com
The information provided herein is believed to be reliable; TriQuint assumes no liability for inaccuracies or omissions. TriQuint assumes no responsibility for the use of this information, and all
such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are
implied or granted to any third party.
TriQuint does not authorize or warranty any TriQuint product for use in life-support devices and/or systems.
Copyright 2003 TriQuint Semiconductor Inc. All rights reserved.
DS03-007 (Replaces DS02-283-1) Revision 1.3, July 2003
Data Sheet
P172-Type Receiver
July 2003
Telcordia Technologies is a trademark of Telcordia Technologies, Inc.