S P E C I F I C A T I O N S :
VSC8142
Rates: OC-48/12/3, FEC, GbE, Fibre Channel and Other Various Data Rates
Power Dissipation: 700mW
Selectable Reference Clock Frequency (78MHz or 155MHz)
Supply Voltage: 2.5V or Optional 2.5V/3.3V
23mm x 23mm, 208 BGA Package
16-bit LVPECL Parallel Interface
Operating Temperature Ranges: -40
C to +85C Ambient, 0C to 70C Ambient
VSC8145
Rates: OC-48/-12/-3, FEC, GbE, Fibre Channel and Other Various Data Rates
Power Dissipation: 800mW
Selectable Reference Clock Frequency (155MHz or 622MHz)
Supply Voltage: 2.5V
21mm x 21mm, 156 BGA Package
4-bit LVDS Parallel Interface
Operating Temperature Ranges: -40
C to +85C Ambient, 0C to 70C Ambient
VSC8147
Rates: OC-48, FEC
Power Dissipation: 800mW
Supply Voltage: 2.5V
14mm x 14mm, 100-pin PQFP Package
4-bit LVDS Parallel Interface
Operating Temperature Ranges: -40
C to +85C Ambient, 0C to 70C Ambient
F E A T U R E S :
OC-48/-12/-3, FEC, GbE, Fibre Channel and Other Various Data Rates
Integrated Clock Recovery and Clock Multiplier Units
Wide Ranging PLLs with Bypass Capabilities
Low-speed Bit Order Swap (MSB/LSB)
On-board FIFO with Auto-reset Function
High-speed Clock Output Power-down Option
LOS Detect with Auto-lock to Reference Clock
Facility, Equipment, and Split Loopback Modes
0.18_
CMOS Technology
A P P L I C A T I O N S :
SONET/SDH Systems
DWDM Systems
Optical Crossconnects
Optical Test Equipment
2.5G Multi-rate SONET/SDH Transceiver Family
PHYSICAL LAYER PRODUCTS
PB-VSC8142,45,47-001
VSC8142, 8145, 8147
For more information on Vitesse products, visit the Vitesse web site
at www.vitesse.com or contact Vitesse Sales at (800) VITESSE
or sales@vitesse.com
2003 Vitesse Semiconductor Corporation
2.5G Multi-rate SONET/SDH Transceiver Family
VSC8142, 8145, 8147
The VSC8142, VSC8145 and VSC8147 are
extended multi-rate transceivers with
integrated Clock Recovery Unit (CRU) and Clock
Multiplier Unit (CMU) for use in SONET/SDH,
DWDM, and other optical transport systems.
The devices perform all required serialization
and deserialization functions for OC-48, OC-
12, OC-3, FEC, Gigabit Ethernet, Fibre Channel and FDDI/Fast
Ethernet data rates.
The integrated CRU Phase Locked Loop (PLL) recovers the high-
speed clock from the input Non-Return to Zero (NRZ) data signal.
The integrated CMU PLL multiplies a low-speed reference clock to
provide the high-speed serial line clock for internal logic and output
retiming. Both CRU and CMU can be bypassed to accommodate
rates not supported by the PLLs. The parallel interface incorporates
an on-board FIFO with auto-reset to eliminating interfacetiming
issues. The devices support serial looptiming as well as Facility,
Equipment, and Split loopback modes.
The VSC8142, VSC8145 and VSC8147 exceed the Telecordia and
ITU-T standards for jitter generation, tolerance and transfer
providing ample design margin. The typical 800mW power
dissipation, along with the thermally-enhance packages, eliminates
the need for external heatsinks and allow the devices to be used in
diverse operating environments. All device are available in
commercial and industrial temperature ranges.
B L O C K D I A G R A M :
G E N E R A L D E S C R I P T I O N :
741 Calle Plano
Camarillo, CA 93012, USA
Tel: +1 805.388.3700
Fax: +1 805.987.5896
www.vitesse.com
B E N E F I T S :
Full SONET/SDH Jitter Compliance:
- Low Jitter Generation: less than 5mUI (typical)
- High Jitter Tolerance: exceeds 2x the SONET mask
Wide-ranging PLLs that not only Provide Support for the Standard
SONET/SDH Rates, but also for:
- Fibre Channel, 2xFibre Channel
- Gigabit Ethernet
- FEC
- FDDI
- Fast Ethernet
Integrated CRU and CMU can be Bypassed if an External CDR is
Required, (e.g, the All-Rate/Adaptive VSC8123 CDR)
The Order of the MSB and LSB on the Low-speed Interfaces can
be Reversed, Giving the Designer Increased Flexibility When
Laying Out the Board
On-board FIFO Auto-Reset Function Eliminates the Need to use
an External Logic
Loss of Signal Detection on High-speed Data Inputs for Robust
Line Monitoring Support
Automatic Lock to Reference Clock on LOS Detection Provides
Continuous Clocking for Upstream Devices
Integrated High-speed and Low-speed Test Capabilities Provide
System Diagnostic Support
RSDI
RefClk
TSDO
TSCLKO
CRU
CMU
RCLK4
TDI(0:3)
RDO(0:3)
RefClk
TCLK40
TCLK41
FIFO
DEMUX
MUX
PDF 
ZIP