GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
9
Electrical
2.5 x 10
5
at 0.4 A, 125 VAC, resistive
3 x 10
6
at 1.0 A, 24 VDC, resistive
Operate Time
1 ms at nominal coil voltage
(typical)
Release Time (typical)
0.4 ms at nominal coil voltage
(with no coil suppression)
Bounce (typical)
At 10 mA contact current
1 ms at operate or release
Dielectric Strength
1500 Vrms contact to coil
(at sea level)
500 Vrms between open contacts
Dropout
Greater than 10% of nominal coil voltage
Insulation Resistance
10
9
ohms min. at 25C, 500 VDC,
50% RH
Ambient Temperature
At nominal coil voltage
Operating
-40C (-40F) to 70C (158F)
Storage
-40C (-40F) to 105C (221F)
Vibration
Operational, 40 g, 10200 Hz
Shock
Operational, 50 g min., 11 ms
Non-destructive, 150 g min., 11 ms
Max. Solder Temp.
Vapor phase: 215C, 40 Sec.
Temp./Time
Infrared: 215C, 40 Sec.
Double wave: 260C, 10 Sec.
Max. Solvent Temp.
80C (176F)
Max. Immersion Time
30 seconds
Weight
1.8 grams
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
CONTACTS
Arrangement
SPDT (1 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 30 W or 60 VA
Max. switched current: 1.0 A
Max. switched voltage: 150 VDC or 125 VAC
Rated Load
UL
0.5 A at 120 VAC
1.0 A at
30 VDC
Material
Palladium nickel with gold-rhodium overlay
Resistance
< 50 milliohms initally
(6 V, 10 mA method)
AZ
7/24/02W
AZ956
MICROMINIATURE
POLARIZED RELAY
FEATURES
Microminiature size: up to 50% less board area than
previous generation telecom relays
Meets FCC Part 68.302 1500 V lightning surge
Low power consumption: 36 mW pickup
Stable contact resistance for low level signal switching
Epoxy sealed for automatic wave soldering and cleaning
UL, CUR file E43203
All plastics meet UL94 V0, 30 min. oxygen index
COIL (Polarized)
Power
At Pickup Voltage
36 mW
(typical)
Max. Continuous
0.5 W at 20C (68F)
Dissipation
Temperature Rise
At nominal coil voltage
8C (15F)
Temperature
Max. 105C (221F)
NOTES
1. All values at 20C (68F).
2. Relay may pull in with less than "Must Operate" value.
3. Relay has fixed coil polarity.
4. Specifications subject to change without notice.