TEA1506AP/N1 - Greenchip(tm)ii SMPS Control Icthe GreenChipTM(1)II is The Second Generation of Green Switched Mode Power Supply (SMPS) Control Ics.A High Level of Integration Leads toA Cost Effective Power Supply WithA Low Number of External Components.
TEA1506AT/N1 - Greenchip(tm)ii SMPS Control Icthe GreenChipTM(1)II is The Second Generation of Green Switched Mode Power Supply (SMPS) Control Ics.A High Level of Integration Leads toA Cost Effective Power Supply WithA Low Number of External Components.
TEA1506P/N1 - Greenchip(tm)ii SMPS Control Icthe GreenChipTM(1)II is The Second Generation of Green Switched Mode Power Supply (SMPS) Control Ics.A High Level of Integration Leads toA Cost Effective Power Supply WithA Low Number of External Components.
TEA1506T/N1 - Greenchip(tm)ii SMPS Control Icthe GreenChipTM(1)II is The Second Generation of Green Switched Mode Power Supply (SMPS) Control Ics.A High Level of Integration Leads toA Cost Effective Power Supply WithA Low Number of External Components.
TEA1622P/N1 - The TEA1622P isA Switched Mode Power Supply (SMPS) Controller ic That Operates Directly From The Rectified Universal Mains. It is Implemented in The High Voltage Ez-hvtm Soi Process, Combined WithA Low Voltage Bicmos Process.
TEA1623PH/N1 - The TEA1623P; TEA1623PH isA Switched Mode Power Supply (SMPS) Controller ic That Operates Directly From The Rectified Universal Mains. It is Implemented in The High Voltage Ez-hvtm Soi Process, Combined WithA Low Voltage Bicmos Process.
TEA1623P/N1 - The TEA1623P; TEA1623PH isA Switched Mode Power Supply (SMPS) Controller ic That Operates Directly From The Rectified Universal Mains. It is Implemented in The High Voltage Ez-hvtm Soi Process, Combined WithA Low Voltage Bicmos Process.
TEA5764HN/N2 - FM-Radio RDSThe TEA5764HN isA single chip electronically tuned FM stereo radio with Radio Data System (RDS) and Radio Broadcast Data System (RBDS) demodulator and RDS/RBDS decoder for portable application with fully integrated IF selectivity and demodulation. The radio is completely adjustment free and only requiresA minimum of small and low cost external components. The radio can tune to the European, US and Japanese FM bands. It hasA low power consumption and can operate atA low supply voltage. Featu
TEA5764UK-G - FM-Radio RDSThe TEA5764UK isA single chip electronically tuned FM stereo radio with Radio Data System (RDS) and Radio Broadcast Data System (RBDS) demodulator and RDS/RBDS decoder for portable application with fully integrated IF selectivity and demodulation. The radio is completely adjustment free and only requiresA minimum of small and low cost external components. The radio can tune to the European, US and Japanese FM bands. It hasA low power consumption and can operate atA low supply voltage. Featu
TEA5764UK/N2 - FM-Radio RDSThe TEA5764UK isA single chip electronically tuned FM stereo radio with Radio Data System (RDS) and Radio Broadcast Data System (RBDS) demodulator and RDS/RBDS decoder for portable application with fully integrated IF selectivity and demodulation. The radio is completely adjustment free and only requiresA minimum of small and low cost external components. The radio can tune to the European, US and Japanese FM bands. It hasA low power consumption and can operate atA low supply voltage. Featu
TEA6846H - New In Car Entertainment NICE car radio
TEA6848H - New In Car Entertainment Car Radio Tuner Ic With Precision Adjacent Channel Suppression
TEA6848H/V1 - In Car Entertainment car radio tuner IC with Precision Adjacent Channel Suppression (NICE-PACS)The TEA6848H isA single IC with car radio tuner for AM, FM and Weather Band (WB) intended for microcontroller tuning with the IІC-bus. It provides the following functions: AM double conversion receiver for LW, MW and SW (31 m, 41 m and 49 m bands) with IF1 = 10.7 MHz and IF2 = 450 kHz FM double conversion receiver with integrated image rejection for IF1 and for IF2 capable of selecting US FM, US weather, Europe F
TEA6848H/V1/S1 - In Car Entertainment car radio tuner IC with Precision Adjacent Channel Suppression (NICE-PACS)The TEA6848H isA single IC with car radio tuner for AM, FM and Weather Band (WB) intended for microcontroller tuning with the IІC-bus. It provides the following functions: AM double conversion receiver for LW, MW and SW (31 m, 41 m and 49 m bands) with IF1 = 10.7 MHz and IF2 = 450 kHz FM double conversion receiver with integrated image rejection for IF1 and for IF2 capable of selecting US FM, US weather, Europe F
TEA6849H - New In Car Entertainment Car Radio Tuner Ic With Precision Adjacent Channel Suppression
TEA6849H/V1 - New in Car Entertainment Car Radio Tuner ic With Precision Adjacent Channel Suppression (NICE-PACS)The TEA6849H isA Single ic With Car Radio Tuner For AM, FM and Weather Band (WB) Intended For Microcontroller Tuning With The i C-bus. It Provides The Following Functions: AM Double Conversion Receiver For LW, MW and SW (31 m, 41 M and 49 M Bands) With IF1 = 10.7 MHZ and IF2 = 450 KHZ FM Double Conversion Receiver With Integrated Image Rejection For IF1 and For IF2 Capable of Selecting us FM, us Weather, Euro
TEA6850 - If Filter / Amplifier / Demodulator For Fm Radio Receivers
TEA6850H - IF filter / amplifier / demodulator for FM radio receivers
TEA6880 - Up-level Car Radio Analog Signal Processor Casp
TEA6880H - Up-level Car radio Analog Signal Processor CASP
TEA6880H/V1 - Up-level Car Radio Analog Signal Processor (CASP)
TEA6886 - Up-level Car Radio Analog Signal Processor Casp
TEA6886HL - Up-level Car radio Analog Signal Processor CASP
TEA7650H - Video Signal Processor For Cd-video/laser Vision
TEF6700HL - Car Radio Tuner Front-end For Digital If
TEF6701HL - Car Radio Tuner Front-end For Digital If
TEF6701HL/V1 - Car radio tuner front-end for digital IFThe TEF6701HL isA single chip car radio tuner for AM, FM standard, FM In-Band On-Channel Digital Audio Broadcast (IBOC DAB) and weather band providing gain controlled output of FM IF and AM IF2 forA car IF DSP IC (e.g. SAA7724H) including the following functions: AM double conversion tuner for LW/MW/SW (31 m, 41 m and 49 m bands) with IF1 = 10.7 MHz and IF2 = 450 kHz FM single conversion tuner to an IF frequency of 10.7 MHz with integrated image rejection for US FM,
TEF6721HL - Car Radio Tuner Front-end For Digital If
TEF6730 - General descriptionThe TEF6730 isA car radio tuner front-end for digital-IF reception, especially designed for co-operation with digital-IF DSP back-ends of the SAF773x and SAF778x families.The FM tuner features single conversion to IF = 10.7 MHz and integrated image rejection; capable for FM 65 MHz to 108 MHz and weather band reception. The AM tuner features single conversion to IF = 10.7 MHz with an integrated AM front-end, capable for LW, MW and full SW reception.A combined AM/FM IF AGC amplifier provi
TEF6901AH/V2 - Integrated car radioThe TEF6901A isA single chip car radio integrated circuit with FM/AM tuner, stereo decoder, weak signal processing and audio processing. Radio Data System (RDS)/Radio Broadcast Data System (RBDS) demodulator for radio data reception is included. FM tuner with double conversion to IF1 = 10.7 MHz and IF2 = 450 kHz with integrated image rejection for both IF1 and IF2; integrated channel filter with variable bandwidth control; capable of US FM, Europe FM, Japan FM and Eastern Europe FM. AM
TEF6902A - General descriptionThe TEF6902A isA single-chip car radio integrated circuit with FM/AM tuner, stereo decoder, weak signal processing and audio processing.FM tuner with double conversion to IF1 = 10.7 MHz and IF2 = 450 kHz with integrated image rejection for both IF1 and IF2; integrated channel filter with variable bandwidth control; capable of US FM, Europe FM, Japan FM and Eastern Europe FM. AM tuner with double conversion to IF1 = 10.7 MHz and IF2 = 450 kHz; capable of Long Wave (LW), Medium Wave (MW) a
TEF6903A - Integrated car radioThe TEF6903A isA single chip car radio integrated circuit with FM/AM tuner, stereo decoder, weak signal processing and audio processing. Radio Data System (RDS)/Radio Broadcast Data System (RBDS) demodulator for radio data reception is included. FM tuner with double conversion to IF1 = 10.7 MHz and IF2 = 450 kHz with integrated image rejection for both IF1 and IF2; integrated channel filter with variable bandwidth control; capable of US FM, Europe FM, Japan FM and Eastern Europe FM. AM
TEF6903AH/V2 - Integrated car radioThe TEF6903A isA single chip car radio integrated circuit with FM/AM tuner, stereo decoder, weak signal processing and audio processing. Radio Data System (RDS)/Radio Broadcast Data System (RBDS) demodulator for radio data reception is included. FM tuner with double conversion to IF1 = 10.7 MHz and IF2 = 450 kHz with integrated image rejection for both IF1 and IF2; integrated channel filter with variable bandwidth control; capable of US FM, Europe FM, Japan FM and Eastern Europe FM. AM
TEF6904A - Integrated car radioThe TEF6904A isA single chip car radio integrated circuit with FM/AM tuner, stereo decoder, weak signal processing and audio processing. FM tuner with double conversion to IF1 = 10.7 MHz and IF2 = 450 kHz with integrated image rejection for both IF1 and IF2; integrated channel filter with variable bandwidth control; capable of US FM, Europe FM, Japan FM and Eastern Europe FM. AM tuner with double conversion to IF1 = 10.7 MHz and IF2 = 450 kHz; capable of Long Wave (LW), Medium Wave (MW)
TEF6904AH/V2 - Integrated car radioThe TEF6904A isA single chip car radio integrated circuit with FM/AM tuner, stereo decoder, weak signal processing and audio processing. FM tuner with double conversion to IF1 = 10.7 MHz and IF2 = 450 kHz with integrated image rejection for both IF1 and IF2; integrated channel filter with variable bandwidth control; capable of US FM, Europe FM, Japan FM and Eastern Europe FM. AM tuner with double conversion to IF1 = 10.7 MHz and IF2 = 450 kHz; capable of Long Wave (LW), Medium Wave (MW)
TJA1080 - FlexRay transceiverGeneral descriptionThe TJA1080 isA FlexRay transceiver, which is compatible with the FlexRay electrical physical layer specification V2.1 Rev.A (see Ref. 1). It is primarily intended for communication systems from 1 Mbit/s to 10 Mbit/s, and provides an advanced interface between the protocol controller and the physical bus inA FlexRay network.The TJA1080 can be configured to be used as an active star transceiver or asA node transceiver.The TJA1080 provides differential transmit capabi
TZA1048TH - 4-channel Btl Driver For Cd/dvd Drives
TZA1049 - 4-channel BTL driver for CD/DVD drivesThe TZA1049 isA four-channel BTL driver IC for driving motors and actuators in CD and DVD players. Two reference voltage outputs are also available for peripheral ICs such as servo and pick-up head drivers. The spindle motor control inputs to the IC can be either differential or single-ended. FeaturesTwo Bridge-Tied Load (BTL) driver channels for sled and spindle motors and actuators Pulse Width Modulation (PWM) input Integral thermal shut-down circuit Integral mute c
TZA1049TH - 4-channel BTL driver for CD/DVD drivesThe TZA1049 isA four-channel BTL driver IC for driving motors and actuators in CD and DVD players. Two reference voltage outputs are also available for peripheral ICs such as servo and pick-up head drivers. The spindle motor control inputs to the IC can be either differential or single-ended. FeaturesTwo Bridge-Tied Load (BTL) driver channels for sled and spindle motors and actuators Pulse Width Modulation (PWM) input Integral thermal shut-down circuit Integral mute c
TZA3026 - SDH/SONET STM4/OC12 transimpedance amplifier The TZA3026 isA transimpedance amplifier with Automatic Gain Control (AGC), designed to be used in STM4/OC12 fiber optic links. It amplifies the current generated byA photo detector (PIN diode or avalanche photodiode) and converts it toA differential output voltage. It offersA current mirror of average photo current for RSSI monitoring to be used in SFF8472 compliant modules. The low noise characteristics makes it suitable for STM4/OC12 applications, but also
TZA3026U/F/N1 - SDH/SONET STM4/OC12 transimpedance amplifier The TZA3026 isA transimpedance amplifier with Automatic Gain Control (AGC), designed to be used in STM4/OC12 fiber optic links. It amplifies the current generated byA photo detector (PIN diode or avalanche photodiode) and converts it toA differential output voltage. It offersA current mirror of average photo current for RSSI monitoring to be used in SFF8472 compliant modules. The low noise characteristics makes it suitable for STM4/OC12 applications, but also
TZA3026U/F/Q/N1 - SDH/SONET STM4/OC12 transimpedance amplifier The TZA3026 isA transimpedance amplifier with Automatic Gain Control (AGC), designed to be used in STM4/OC12 fiber optic links. It amplifies the current generated byA photo detector (PIN diode or avalanche photodiode) and converts it toA differential output voltage. It offersA current mirror of average photo current for RSSI monitoring to be used in SFF8472 compliant modules. The low noise characteristics makes it suitable for STM4/OC12 applications, but also
TZA3026U/N1 - SDH/SONET STM4/OC12 transimpedance amplifier The TZA3026 isA transimpedance amplifier with Automatic Gain Control (AGC), designed to be used in STM4/OC12 fiber optic links. It amplifies the current generated byA photo detector (PIN diode or avalanche photodiode) and converts it toA differential output voltage. It offersA current mirror of average photo current for RSSI monitoring to be used in SFF8472 compliant modules. The low noise characteristics makes it suitable for STM4/OC12 applications, but also
TZA3026U/T/N1 - SDH/SONET STM4/OC12 transimpedance amplifier The TZA3026 isA transimpedance amplifier with Automatic Gain Control (AGC), designed to be used in STM4/OC12 fiber optic links. It amplifies the current generated byA photo detector (PIN diode or avalanche photodiode) and converts it toA differential output voltage. It offersA current mirror of average photo current for RSSI monitoring to be used in SFF8472 compliant modules. The low noise characteristics makes it suitable for STM4/OC12 applications, but also
TZA3036 - SDH/SONET STM1/OC3 transimpedance amplifierThe TZA3036 isA transimpedance amplifier with Automatic Gain Control (AGC), designed to be used in STM1/OC3 fiber optic links. It amplifies the current generated byA photo detector (PIN diode or avalanche photodiode) and converts it toA differential output voltage. It offersA current mirror of average photo current for RSSI monitoring to be used in SFF-8472 compliant modules.